Author Message

<  Everything Coding  ~  no modeswitch after power on, udev read-only error

PostPosted: Mon Jun 05, 2017 3:25 pm Reply with quote
Posts: 2Joined: Mon Jun 05, 2017 3:03 pm
Hi!
I've got problem with 2 Huawei modems after go from Slackware 14.1 without inird to 14.2 with initrd.
My modems are not switched after power on. When I re-plug them or type "usb_modeswitch... "or "udevadm trigger --action=add" they become switched for modem mode.

After reboot (with power on on usb) they keep previous state.

After increasing dmesg buffer size and connecting serial console, I find some errors, but I don't know what should I do.
I don't want to switch it manually, I want to switch few (10 or more) seconds before /etc/rc.inet1 try to bring up interface. And on 14.1 (still have second disk on shelve with this version) it worked just fine. I have to change version and kernel because there was problem with data transfer with one of the Huawei, but modeswitching was OK.


So in /var/messages:

Code:
Jun  2 18:35:00 ibmserwer kernel: <31>[   10.475603] udevd[1722]: RUN 'usb_modeswitch '%b/%k'' /lib/udev/rules.d/40-usb_modeswitch.rules:24
Jun  2 18:35:00 ibmserwer kernel: <31>[   10.475629] udevd[1716]: RUN 'usb_modeswitch '%b/%k'' /lib/udev/rules.d/40-usb_modeswitch.rules:24

[...]

Jun  2 18:35:00 ibmserwer kernel: <31>[   10.740285] udevd[1716]: 'usb_modeswitch '/1-7:1.0''(err) '/lib/udev/usb_modeswitch: line 77: cannot create temp file for here-document: Read-only file system'
Jun  2 18:35:00 ibmserwer kernel: <31>[   10.740311] udevd[1719]: no db file to read /run/udev/data/b8:1: No such file or directory


and full of serial console:
Code:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2017.06.02 18:31:25 =~=~=~=~=~=~=~=~=~=~=~=

INIT: Switching to runlevel: 0
INIT: Sending processes the TERM signalRunning shutdown script /etc/rc.d/rc.0:
Saving system time to the hardware clock (localtime).
Stopping system message bus...
Unmounting remote filesystems:
Stopping udevd
calling: control
Sending all processes the SIGTERM signal.
apcupsd[2402]: apcupsd exiting, signal 15apcupsd[2402]: apcupsd shutdown succeededSending all processes the SIGKILL signal.
Saving random seed from /dev/urandom in /etc/random-seed.
Turning off swap.
Stopping cgmanager.
Unmounting local file systems:
/mnt/kopia_zapasowa has been successfully unmounted.
/mnt/dane has been successfully unmounted.
/dev/shm has been successfully unmounted.
/ has been successfully unmounted.
Remounting root filesystem read-only:
mount: /dev/sda1 mounted on /.
[  263.579582] reboot: Power down


[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.38 (root@hive64) (gcc version 5.3.0 (GCC) ) #2 SMP Sun Dec 11 16:18:36 CST 2016
[    0.000000] Command line: auto BOOT_IMAGE=Linux ro root=801 vt.default_utf8=1 log_buf_len=524288 console=tty0 console=ttyS0,115200n8
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffcb3bf] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffcb3c0-0x00000000bffceabf] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bffceac0-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] e820: last_pfn = 0xbffcb max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x0009ad40-0x0009ad4f] mapped at [ffff88000009ad40]
[    0.000000] log_buf_len: 524288 bytes
[    0.000000] early log buf free: 259052(98%)
[    0.000000] RAMDISK: [mem 0x7f9fd000-0x7fffffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FDFD0 000024 (v02 IBM   )
[    0.000000] ACPI: XSDT 0x00000000BFFCE9C0 00004C (v01 IBM    SERVALNT 00001000 IBM  45444F43)
[    0.000000] ACPI: FACP 0x00000000BFFCE900 000084 (v02 IBM    SERVALNT 00001000 IBM  45444F43)
[    0.000000] ACPI: DSDT 0x00000000BFFCB3C0 002B2E (v02 IBM    SERVALNT 00001000 INTL 20041203)
[    0.000000] ACPI: FACS 0x00000000BFFCE640 000040
[    0.000000] ACPI: APIC 0x00000000BFFCE840 000084 (v01 IBM    SERVALNT 00001000 IBM  45444F43)
[    0.000000] ACPI: SRAT 0x00000000BFFCE700 0000E8 (v01 IBM    SERVALNT 00001000 IBM  45444F43)
[    0.000000] ACPI: HPET 0x00000000BFFCE6C0 000038 (v01 IBM    SERVALNT 00001000 IBM  45444F43)
[    0.000000] ACPI: MCFG 0x00000000BFFCE680 00003C (v01 IBM    SERVALNT 00001000 IBM  45444F43)
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000099fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bffcafff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x588
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffcb000-0xbffcbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffcc000-0xbffcdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffce000-0xbffcefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffcf000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 31 pages/cpu @ffff88013fc00000 s90008 r8192 d28776 u524288
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1032015
[    0.000000] Kernel command line: auto BOOT_IMAGE=Linux ro root=801 vt.default_utf8=1 log_buf_len=524288 console=tty0 console=ttyS0,115200n8
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Memory: 4024136K/4193680K available (12758K kernel code, 1406K rwdata, 4664K rodata, 1384K init, 956K bss, 169544K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] Build-time adjustment of leaf fanout to 64.
[    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:16640 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2327.700 MHz processor
[    0.002004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4655.40 BogoMIPS (lpj=2327700)
[    0.004002] pid_max: default: 32768 minimum: 301
[    0.005009] ACPI: Core revision 20150930
[    0.008059] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.010386] Security Framework initialized
[    0.011012] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.012003] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.013323] Initializing cgroup subsys io
[    0.014006] Initializing cgroup subsys memory
[    0.015013] Initializing cgroup subsys devices
[    0.016005] Initializing cgroup subsys freezer
[    0.017005] Initializing cgroup subsys net_cls
[    0.018005] Initializing cgroup subsys perf_event
[    0.019004] Initializing cgroup subsys net_prio
[    0.020006] Initializing cgroup subsys pids
[    0.021025] CPU: Physical Processor ID: 0
[    0.022002] CPU: Processor Core ID: 0
[    0.023003] mce: CPU supports 6 MCE banks
[    0.024007] CPU0: Thermal monitoring enabled (TM2)
[    0.025003] process: using mwait in idle threads
[    0.026005] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.027002] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.028372] Freeing SMP alternatives memory: 40K (ffffffff826bb000 - ffffffff826c5000)
[    0.030004] ftrace: allocating 41451 entries in 162 pages
[    0.042489] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.053000] smpboot: CPU0: Intel(R) Xeon(R) CPU           E5345  @ 2.33GHz (family: 0x6, model: 0xf, stepping: 0xb)
[    0.056031] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.061001] perf_event_intel: PEBS disabled due to CPU errata
[    0.062003] ... version:                2
[    0.063001] ... bit width:              40
[    0.064001] ... generic registers:      2
[    0.065001] ... value mask:             000000ffffffffff
[    0.066001] ... max period:             000000007fffffff
[    0.067001] ... fixed-purpose events:   3
[    0.068001] ... event mask:             0000000700000003
[    0.069307] x86: Booting SMP configuration:
[    0.070002] .... node  #0, CPUs:      #1 #2 #3
[    0.077021] x86: Booted up 1 node, 4 CPUs
[    0.078003] smpboot: Total of 4 processors activated (18621.60 BogoMIPS)
[    0.080191] devtmpfs: initialized
[    0.084509] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.085059] xor: measuring software checksum speed
[    0.096002]    prefetch64-sse:  9036.000 MB/sec
[    0.107001]    generic_sse:  8072.000 MB/sec
[    0.108001] xor: using function: prefetch64-sse (9036.000 MB/sec)
[    0.109011] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.110003] pinctrl core: initialized pinctrl subsystem
[    0.111235] NET: Registered protocol family 16
[    0.116004] cpuidle: using governor ladder
[    0.121005] cpuidle: using governor menu
[    0.122093] ACPI: bus type PCI registered
[    0.123002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.125054] PCI: MMCONFIG for domain 0000 [bus 00-25] at [mem 0xe0000000-0xe25fffff] (base 0xe0000000)
[    0.126003] PCI: MMCONFIG at [mem 0xe0000000-0xe25fffff] reserved in E820
[    0.127005] PCI: Using configuration type 1 for base access
[    0.155003] raid6: sse2x1   gen()  3011 MB/s
[    0.173004] raid6: sse2x1   xor()  3667 MB/s
[    0.191006] raid6: sse2x2   gen()  6253 MB/s
[    0.209005] raid6: sse2x2   xor()  4410 MB/s
[    0.227007] raid6: sse2x4   gen()  7105 MB/s
[    0.245002] raid6: sse2x4   xor()  4832 MB/s
[    0.246002] raid6: using algorithm sse2x4 gen() 7105 MB/s
[    0.247001] raid6: .... xor() 4832 MB/s, rmw enabled
[    0.248001] raid6: using ssse3x2 recovery algorithm
[    0.249083] ACPI: Added _OSI(Module Device)
[    0.250002] ACPI: Added _OSI(Processor Device)
[    0.251001] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.252001] ACPI: Added _OSI(Processor Aggregator Device)
[    0.255644] ACPI: Interpreter enabled
[    0.256016] ACPI: (supports S0 S4 S5)
[    0.257002] ACPI: Using IOAPIC for interrupt routing
[    0.258025] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.269418] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.270006] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.271053] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER PCIeCapability]
[    0.272003] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.273003] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.274002] acpi PNP0A08:00: _OSC: platform willing to grant []
[    0.275002] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.276004] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-25] only partially covers this bridge
[    0.285289] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cafff])
[    0.286135] PCI host bridge to bus 0000:00
[    0.287003] pci_bus 0000:00: root bus resource [mem 0xf40000000-0xfffffffff window]
[    0.288002] pci_bus 0000:00: root bus resource [mem 0xec0000000-0xeffffffff window]
[    0.289002] pci_bus 0000:00: root bus resource [mem 0xe40000000-0xe7fffffff window]
[    0.290002] pci_bus 0000:00: root bus resource [mem 0xdc0000000-0xdffffffff window]
[    0.291002] pci_bus 0000:00: root bus resource [mem 0xd40000000-0xd7fffffff window]
[    0.292002] pci_bus 0000:00: root bus resource [mem 0xcc0000000-0xcffffffff window]
[    0.293002] pci_bus 0000:00: root bus resource [mem 0xc40000000-0xc7fffffff window]
[    0.294002] pci_bus 0000:00: root bus resource [mem 0xbc0000000-0xbffffffff window]
[    0.295002] pci_bus 0000:00: root bus resource [mem 0xb40000000-0xb7fffffff window]
[    0.296002] pci_bus 0000:00: root bus resource [mem 0xac0000000-0xaffffffff window]
[    0.297002] pci_bus 0000:00: root bus resource [mem 0xa40000000-0xa7fffffff window]
[    0.298002] pci_bus 0000:00: root bus resource [mem 0x9c0000000-0x9ffffffff window]
[    0.299002] pci_bus 0000:00: root bus resource [mem 0x940000000-0x97fffffff window]
[    0.300002] pci_bus 0000:00: root bus resource [mem 0x8c0000000-0x8ffffffff window]
[    0.301002] pci_bus 0000:00: root bus resource [mem 0x840000000-0x87fffffff window]
[    0.302002] pci_bus 0000:00: root bus resource [mem 0x7c0000000-0x7ffffffff window]
[    0.303002] pci_bus 0000:00: root bus resource [mem 0x740000000-0x77fffffff window]
[    0.304002] pci_bus 0000:00: root bus resource [mem 0x6c0000000-0x6ffffffff window]
[    0.305002] pci_bus 0000:00: root bus resource [mem 0x640000000-0x67fffffff window]
[    0.306002] pci_bus 0000:00: root bus resource [mem 0x5c0000000-0x5ffffffff window]
[    0.307002] pci_bus 0000:00: root bus resource [mem 0x540000000-0x57fffffff window]
[    0.308002] pci_bus 0000:00: root bus resource [mem 0x4c0000000-0x4ffffffff window]
[    0.309002] pci_bus 0000:00: root bus resource [mem 0x440000000-0x47fffffff window]
[    0.310002] pci_bus 0000:00: root bus resource [mem 0x3c0000000-0x3ffffffff window]
[    0.311002] pci_bus 0000:00: root bus resource [mem 0x340000000-0x37fffffff window]
[    0.312002] pci_bus 0000:00: root bus resource [mem 0x2c0000000-0x2ffffffff window]
[    0.313002] pci_bus 0000:00: root bus resource [mem 0x240000000-0x27fffffff window]
[    0.314002] pci_bus 0000:00: root bus resource [mem 0x1c0000000-0x1ffffffff window]
[    0.315002] pci_bus 0000:00: root bus resource [mem 0x140000000-0x17fffffff window]
[    0.316002] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[    0.317002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.318002] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.319002] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.320002] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.325072] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.326002] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.327002] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.328002] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.335781] pci 0000:1a:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.336190] pci 0000:00:02.0: PCI bridge to [bus 1a-25]
[    0.342689] pci 0000:1b:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.347138] pci 0000:1b:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.349781] pci 0000:1a:00.0: PCI bridge to [bus 1b-24]
[    0.351644] pci 0000:1b:00.0: PCI bridge to [bus 1c]
[    0.354324] pci 0000:1b:01.0: PCI bridge to [bus 24]
[    0.358368] pci 0000:1a:00.3: PCI bridge to [bus 25]
[    0.360229] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.361008] pci 0000:00:03.0: PCI bridge to [bus 04]
[    0.362064] pci 0000:00:04.0: PCI bridge to [bus 10]
[    0.363041] pci 0000:00:05.0: PCI bridge to [bus 45]
[    0.364056] pci 0000:00:06.0: PCI bridge to [bus 07]
[    0.365040] pci 0000:00:07.0: PCI bridge to [bus 44]
[    0.366234] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.367009] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.368318] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.370081] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.371009] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[    0.373105] pci 0000:05:00.0: PCI bridge to [bus 06]
[    0.374256] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[    0.376041] ACPI: PCI Interrupt Link [LP00] (IRQs *5)
[    0.378464] ACPI: PCI Interrupt Link [LP01] (IRQs *10)
[    0.380098] ACPI: PCI Interrupt Link [LP02] (IRQs *11)
[    0.382597] ACPI: PCI Interrupt Link [LP03] (IRQs) *0, disabled.
[    0.385099] ACPI: PCI Interrupt Link [LP04] (IRQs *5)
[    0.387602] ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled.
[    0.390103] ACPI: PCI Interrupt Link [LP06] (IRQs *11)
[    0.392598] ACPI: PCI Interrupt Link [LP07] (IRQs *7)
[    0.394113] vgaarb: setting as boot device: PCI:0000:01:06.0
[    0.395000] vgaarb: device added: PCI:0000:01:06.0,decodes=io+mem,owns=io+mem,locks=none
[    0.408002] vgaarb: loaded
[    0.411001] vgaarb: bridge control possible 0000:01:06.0
[    0.416194] SCSI subsystem initialized
[    0.420034] ACPI: bus type USB registered
[    0.424006] usbcore: registered new interface driver usbfs
[    0.430013] usbcore: registered new interface driver hub
[    0.435022] usbcore: registered new device driver usb
[    0.441042] ioremap error for 0xbffce000-0xbffd0000, requested 0x2, got 0x0
[    0.448004] dmi: Firmware registration failed.
[    0.452024] PCI: Using ACPI for IRQ routing
[    0.463169] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.470005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.475353] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.483020] amd_nb: Cannot enumerate AMD northbridges
[    0.488025] clocksource: Switched to clocksource hpet
[    0.505839] pnp: PnP ACPI init
[    0.509595] system 00:00: [io  0x0520-0x053f] has been reserved
[    0.515686] system 00:00: [io  0x0540-0x0547] has been reserved
[    0.522633] system 00:04: [io  0x0ca8] has been reserved
[    0.528119] system 00:04: [io  0x0cac] has been reserved
[    0.533683] system 00:05: [io  0x0400-0x043f] has been reserved
[    0.539779] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.545869] system 00:05: [io  0x0540-0x055f] could not be reserved
[    0.552309] system 00:05: [io  0x0560-0x057f] has been reserved
[    0.558395] system 00:05: [io  0x0580-0x05ff] could not be reserved
[    0.564836] system 00:05: [io  0x0800-0x080f] has been reserved
[    0.570929] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.577713] system 00:05: [mem 0xfecc0000-0xfecc3fff] has been reserved
[    0.584497] system 00:05: [mem 0xfe000000-0xfe01ffff] has been reserved
[    0.591278] system 00:05: [mem 0xfe020000-0xfe6fffff] has been reserved
[    0.598066] system 00:05: [mem 0xfe700400-0xfebfffff] has been reserved
[    0.604858] system 00:05: [mem 0xfff00000-0xffffffff] has been reserved
[    0.611812] pnp: PnP ACPI: found 6 devices
[    0.622804] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.632919] pci 0000:1b:00.0: PCI bridge to [bus 1c]
[    0.638421] pci 0000:1b:01.0: PCI bridge to [bus 24]
[    0.643931] pci 0000:1a:00.0: PCI bridge to [bus 1b-24]
[    0.649701] pci 0000:1a:00.3: PCI bridge to [bus 25]
[    0.655117] pci 0000:00:02.0: PCI bridge to [bus 1a-25]
[    0.660527] pci 0000:04:00.0: BAR 6: assigned [mem 0xc8000000-0xc8007fff pref]
[    0.668042] pci 0000:00:03.0: PCI bridge to [bus 04]
[    0.673186] pci 0000:00:03.0:   bridge window [io  0x5000-0x5fff]
[    0.679451] pci 0000:00:03.0:   bridge window [mem 0xc8000000-0xc9ffffff]
[    0.686410] pci 0000:00:03.0:   bridge window [mem 0xc7f00000-0xc7ffffff 64bit pref]
[    0.694453] pci 0000:00:04.0: PCI bridge to [bus 10]
[    0.699594] pci 0000:00:04.0:   bridge window [io  0x6000-0xffff]
[    0.705864] pci 0000:00:05.0: PCI bridge to [bus 45]
[    0.711011] pci 0000:00:06.0: PCI bridge to [bus 07]
[    0.716156] pci 0000:00:07.0: PCI bridge to [bus 44]
[    0.721301] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.726445] pci 0000:02:00.0:   bridge window [mem 0xcd000000-0xcfffffff]
[    0.733409] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.738810] pci 0000:00:1c.0:   bridge window [mem 0xcd000000-0xcfffffff]
[    0.745783] pci 0000:05:00.0: PCI bridge to [bus 06]
[    0.754141] pci 0000:05:00.0:   bridge window [mem 0xca000000-0xccffffff]
[    0.761109] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[    0.766505] pci 0000:00:1c.1:   bridge window [mem 0xca000000-0xccffffff]
[    0.773473] pci 0000:01:06.0: BAR 6: assigned [mem 0xde000000-0xde01ffff pref]
[    0.780985] pci 0000:00:1e.0: PCI bridge to [bus 01]
[    0.786122] pci 0000:00:1e.0:   bridge window [io  0x3000-0x4fff]
[    0.792387] pci 0000:00:1e.0:   bridge window [mem 0xde000000-0xdfffffff]
[    0.799345] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xddffffff 64bit pref]
[    0.807589] NET: Registered protocol family 2
[    0.812310] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.819941] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.826942] TCP: Hash tables configured (established 32768 bind 32768)
[    0.833687] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.839893] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.846581] NET: Registered protocol family 1
[    0.851218] RPC: Registered named UNIX socket transport module.
[    0.857322] RPC: Registered udp transport module.
[    0.862198] RPC: Registered tcp transport module.
[    0.867076] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.874725] pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
[    0.881328] Trying to unpack rootfs image as initramfs...
[    1.009717] Freeing initrd memory: 6156K (ffff88007f9fd000 - ffff880080000000)
[    1.017279] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.023903] software IO TLB [mem 0xbbfcb000-0xbffcb000] (64MB) mapped at [ffff8800bbfcb000-ffff8800bffcafff]
[    1.035675] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.042095] audit: initializing netlink subsys (disabled)
[    1.047684] audit: type=2000 audit(1496428480.046:1): initialized
[    1.054114] Initialise system trusted keyring
[    1.061218] VFS: Disk quotas dquot_6.6.0
[    1.065368] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.073099] NFS: Registering the id_resolver key type
[    1.078334] Key type id_resolver registered
[    1.082686] Key type id_legacy registered
[    1.086874] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.093615] ntfs: driver 2.1.32 [Flags: R/W].
[    1.098216] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    1.103362] JFS: nTxBlock = 8192, nTxLock = 65536
[    1.111304] SGI XFS with ACLs, security attributes, no debug enabled
[    1.118498] ocfs2: Registered cluster interface o2cb
[    1.123714] OCFS2 User DLM kernel interface loaded
[    1.131877] async_tx: api initialized (async)
[    1.136473] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.144241] io scheduler noop registered
[    1.148346] io scheduler deadline registered
[    1.152816] io scheduler cfq registered (default)
[    1.162459] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.168215] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.175053] GHES: HEST is not enabled!
[    1.181527] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.208544] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.236788] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.248712] brd: module loaded
[    1.251950] HP CISS Driver (v 3.6.26)
[    1.256337] fnic: Cisco FCoE HBA Driver, ver 1.6.0.17a
[    1.261701] fnic: Successfully Initialized Trace Buffer
[    1.267197] fnic: Successfully Initialized FC_CTLR Trace Buffer
[    1.273644] Adaptec aacraid driver 1.2-1[41010]-ms
[    1.278634] aacraid 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.488364] AAC0: kernel 5.2-0[17003] Jul 25 2011
[    1.493250] AAC0: monitor 5.2-0[17003]
[    1.497170] AAC0: bios 5.2-0[17003]
[    1.500833] AAC0: serial 595BBE0
[    1.504241] AAC0: 64bit support enabled.
[    1.508335] AAC0: 64 Bit DAC enabled
[    1.519526] scsi host0: ServeRAID
[    1.523384] scsi 0:0:0:0: Direct-Access     ServeRA  system 14.2      V1.0 PQ: 0 ANSI: 2
[    1.532330] scsi 0:0:1:0: Direct-Access     ServeRA  dane             V1.0 PQ: 0 ANSI: 2
[    1.541187] scsi 0:0:2:0: Direct-Access     ServeRA  backup           V1.0 PQ: 0 ANSI: 2
[    1.592951] scsi 0:1:0:0: Direct-Access     IBM-ESXS ST373355SS       BA33 PQ: 0 ANSI: 5
[    1.606219] scsi 0:1:1:0: Direct-Access     Hitachi  HDS722020ALA330  A3MA PQ: 0 ANSI: 5
[    1.622009] scsi 0:1:4:0: Direct-Access     ST375064 0NS              H    PQ: 0 ANSI: 5
[    1.636540] scsi 0:1:5:0: Direct-Access     ST375064 0NS              H    PQ: 0 ANSI: 5
[    1.762041] scsi 0:3:0:0: Enclosure         IBM-ESXS VSC7160          1.07 PQ: 0 ANSI: 3
[    1.955979] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    1.963087] scsi: <fdomain> Detection failed (no card)
[    1.968820] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.26-k.
[    1.977309] Emulex LightPulse Fibre Channel SCSI driver 11.0.0.0.
[    1.983575] Copyright(c) 2004-2015 Emulex.  All rights reserved.
[    1.989819] Brocade BFA FC/FCOE SCSI driver - version: 3.2.23.0
[    1.996126] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    2.003755] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    2.011012] megasas: 06.808.16.00-rc1
[    2.014870] mpt3sas version 09.102.00.00 loaded
[    2.019668] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    2.025977] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    2.033045] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    2.035030] tsc: Refined TSC clocksource calibration: 2327.499 MHz
[    2.035033] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x218cae85130, max_idle_ns: 440795262788 ns
[    2.057300] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    2.065421] ipr: IBM Power RAID SCSI Device Driver version: 2.6.3 (October 17, 2015)
[    2.073474] RocketRAID 3xxx/4xxx Controller driver v1.10.0
[    2.079150] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[    2.085503] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[    2.092110] sd 0:0:0:0: [sda] 143155200 512-byte logical blocks: (73.3 GB/68.3 GiB)
[    2.092556] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    2.105575] sd 0:0:0:0: [sda] Write Protect is off
[    2.110571] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[    2.110593] sd 0:0:1:0: [sdb] 2929868800 512-byte logical blocks: (1.50 TB/1.36 TiB)
[    2.110605] sd 0:0:1:0: [sdb] Write Protect is off
[    2.110625] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[    2.110799] sd 0:0:2:0: [sdc] 3906764800 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.110810] sd 0:0:2:0: [sdc] Write Protect is off
[    2.110832] sd 0:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
[    2.119509]  sdb: sdb1
[    2.119510]  sdc: sdc1
[    2.119720] sd 0:0:1:0: [sdb] Attached SCSI removable disk
[    2.119816] sd 0:0:2:0: [sdc] Attached SCSI removable disk
[    2.243426] scsi host1: ata_piix
[    2.246957] scsi host2: ata_piix
[    2.250406] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x480 irq 14
[    2.257454] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x488 irq 15
[    2.265479] Fusion MPT base driver 3.04.20
[    2.269749] Copyright (c) 1999-2008 LSI Corporation
[    2.271106]  sda: sda1
[    2.271282] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    2.282995] Fusion MPT SPI Host driver 3.04.20
[    2.287634] Fusion MPT FC Host driver 3.04.20
[    2.292183] Fusion MPT SAS Host driver 3.04.20
[    2.296820] Fusion MPT misc device (ioctl) driver 3.04.20
[    2.302420] mptctl: Registered with Fusion MPT base driver
[    2.308085] mptctl: /dev/mptctl @ (major,minor=10,220)
[    2.313399] Fusion MPT LAN driver 3.04.20
[    2.317668] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.426183] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-T10N, 1.00, max UDMA/33
[    2.439186] ata2.00: configured for UDMA/33
[    2.575212] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.580469] mousedev: PS/2 mouse device common for all mice
[    2.586384] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.592673] rtc_cmos 00:03: alarms up to one year, 242 bytes nvram, hpet irqs
[    2.599994] md: linear personality registered for level -1
[    2.605656] md: raid0 personality registered for level 0
[    2.611145] md: raid1 personality registered for level 1
[    2.616637] md: raid10 personality registered for level 10
[    2.622361] md: raid6 personality registered for level 6
[    2.627852] md: raid5 personality registered for level 5
[    2.633337] md: raid4 personality registered for level 4
[    2.638831] md: multipath personality registered for level -4
[    2.644815] device-mapper: uevent: version 1.0.3
[    2.649719] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    2.658598] input: Speakup as /devices/virtual/input/input1
[    2.664439] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[    2.671078] speakup 3.1.6: initialized
[    2.675005] synth name on entry is: (null)
[    2.679573] Initializing XFRM netlink socket
[    2.684031] NET: Registered protocol family 17
[    2.688680] 9pnet: Installing 9P2000 support
[    2.693152] Key type dns_resolver registered
[    2.697901] microcode: CPU0 sig=0x6fb, pf=0x40, revision=0xb7
[    2.703829] microcode: CPU1 sig=0x6fb, pf=0x40, revision=0xb7
[    2.712980] microcode: CPU2 sig=0x6fb, pf=0x40, revision=0xb7
[    2.718910] microcode: CPU3 sig=0x6fb, pf=0x40, revision=0xb7
[    2.724860] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.734110] registered taskstats version 1
[    2.738383] Loading compiled-in X.509 certificates
[    2.743914] Btrfs loaded
[    2.750191] Key type encrypted registered
[    3.035076] clocksource: Switched to clocksource tsc
[    4.271044] floppy0: no floppy controllers found
[    4.280886] scsi 2:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-T10N  1.00 PQ: 0 ANSI: 5
[    4.316203] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    4.324418] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.331986] Freeing unused kernel memory: 1384K (ffffffff82561000 - ffffffff826bb000)
[    4.340117] Write protecting the kernel read-only data: 20480k
[    4.346833] Freeing unused kernel memory: 1568K (ffff880001c78000 - ffff880001e00000)
[    4.358958] Freeing unused kernel memory: 1480K (ffff88000228e000 - ffff880002400000)
[    4.380161] random: udevd: uninitialized urandom read (16 bytes read, 69 bits of entropy available)
[    4.389592] random: udevd: uninitialized urandom read (16 bytes read, 69 bits of entropy available)
[    4.398946] random: udevd: uninitialized urandom read (16 bytes read, 69 bits of entropy available)
[    4.408307] random: udevd: uninitialized urandom read (16 bytes read, 69 bits of entropy available)
[    4.417675] random: udevd: uninitialized urandom read (16 bytes read, 69 bits of entropy available)
[    4.427069] random: udevd: uninitialized urandom read (16 bytes read, 69 bits of entropy available)
[    4.467284] udevd[1244]: starting eudev-3.1.5
[    4.473828] random: udevd: uninitialized urandom read (16 bytes read, 69 bits of entropy available)
[    4.483202] random: udevd: uninitialized urandom read (16 bytes read, 69 bits of entropy available)
[    4.492571] random: udevd: uninitialized urandom read (16 bytes read, 69 bits of entropy available)
[    4.501947] random: udevd: uninitialized urandom read (16 bytes read, 69 bits of entropy available)
[    4.605340] random: nonblocking pool is initialized
/boot/initrd.gz:  Loading kernel[    4.883587] aacraid: module is already loaded
 modules from initrd image:
insmod /lib/modules/4.4.38/kernel/drivers/scsi/aacraid/aacraid.ko
modprobe: ERROR: could not inser[    4.899681] usbcore: registered new interface driver usb-storage
t 'aacraid': Invalid argument
i[    4.908296] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
nsmod /lib/modul[    4.917435] ehci-pci: EHCI PCI platform driver
es/4.4.38/kernel[    4.922611] ehci-pci 0000:00:1d.7: EHCI Host Controller
/drivers/usb/sto[    4.929042] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
rage/usb-storage[    4.937869] ehci-pci 0000:00:1d.7: debug port 1
.ko
insmod /lib/modules/4.4.38/kernel/drivers/[    4.947576] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9000000
usb/host/ehci-hcd.ko
insmod /lib/modules/4.4.38/kernel/drivers/usb/host/ehci-p[    4.959069] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
ci.ko
[    4.966381] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.973966] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.981482] usb usb1: Product: EHCI Host Controller
[    4.986534] usb usb1: Manufacturer: Linux 4.4.38 ehci_hcd
[    4.992107] usb usb1: SerialNumber: 0000:00:1d.7
[    4.997063] hub 1-0:1.0: USB hub found
[    5.000997] hub 1-0:1.0: 8 ports detected
insmod /lib/modu[    5.006901] uhci_hcd: USB Universal Host Controller Interface driver
les/4.4.38/kerne[    5.014798] uhci_hcd 0000:00:1d.0: UHCI Host Controller
l/drivers/usb/ho[    5.021284] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
st/uhci-hcd.ko
[    5.030172] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002200

[    5.037486] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    5.044449] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.051971] usb usb2: Product: UHCI Host Controller
[    5.057030] usb usb2: Manufacturer: Linux 4.4.38 uhci_hcd
[    5.062597] usb usb2: SerialNumber: 0000:00:1d.0
[    5.067525] hub 2-0:1.0: USB hub found
[    5.071456] hub 2-0:1.0: 2 ports detected
[    5.075899] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.081351] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    5.089081] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00002600
[    5.095047] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.102007] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.109536] usb usb3: Product: UHCI Host Controller
[    5.114590] usb usb3: Manufacturer: Linux 4.4.38 uhci_hcd
[    5.120174] usb usb3: SerialNumber: 0000:00:1d.1
[    5.125085] hub 3-0:1.0: USB hub found
[    5.129020] hub 3-0:1.0: 2 ports detected
[    5.133432] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.138881] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    5.146594] uhci_hcd 0000:00:1d.2: irq 23, io base 0x00002a00
[    5.152552] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    5.159520] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.167042] usb usb4: Product: UHCI Host Controller
[    5.172103] usb usb4: Manufacturer: Linux 4.4.38 uhci_hcd
[    5.177677] usb usb4: SerialNumber: 0000:00:1d.2
[    5.182629] hub 4-0:1.0: USB hub found
[    5.186564] hub 4-0:1.0: 2 ports detected
[    5.190960] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    5.196413] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    5.204152] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00002e00
[    5.210120] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    5.217095] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.224616] usb usb5: Product: UHCI Host Controller
[    5.229669] usb usb5: Manufacturer: Linux 4.4.38 uhci_hcd
[    5.235250] usb usb5: SerialNumber: 0000:00:1d.3
[    5.240221] hub 5-0:1.0: USB hub found
[    5.244160] hub 5-0:1.0: 2 ports detected
insmod /lib/modu[    5.249971] jbd2: exports duplicate symbol jbd2__journal_restart (owned by kernel)
les/4.4.38/kernel/fs/jbd2/jbd2.ko
modprobe: ERROR:[    5.273291] mbcache: exports duplicate symbol mb_cache_create (owned by kernel)
 could not insert 'jbd2': Exec format error
insmod /lib/modules/4.4.38/kernel/fs/mbcache.ko
modprobe: ERROR:[    5.293302] jbd2: exports duplicate symbol jbd2__journal_restart (owned by kernel)
 could not insert 'mbcache': Exec format error
insmod /lib/modules/4.4.38/kernel/fs/jbd2/jbd2.ko
[    5.310043] usb 1-1: new high-speed USB device number 2 using ehci-pci
modprobe: ERROR: could not insert 'ext4': Exec format error
[    5.432566] usb 1-1: New USB device found, idVendor=12d1, idProduct=1f01
[    5.439450] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.446760] usb 1-1: Product: HUAWEI_MOBILE
[    5.451117] usb 1-1: Manufacturer: HUAWEI_MOBILE
[    5.455907] usb 1-1: SerialNumber: 0123456789ABCDEF
[    5.493845] usb-storage 1-1:1.0: USB Mass Storage device detected
[    5.500219] scsi host3: usb-storage 1-1:1.0
[    5.606013] usb 1-7: new high-speed USB device number 3 using ehci-pci
[    5.727198] usb 1-7: New USB device found, idVendor=12d1, idProduct=14fe
[    5.734075] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.741394] usb 1-7: Product: HUAWEI_MOBILE
[    5.745748] usb 1-7: Manufacturer: HUAWEI_MOBILE
[    5.750538] usb 1-7: SerialNumber: 0123456789ABCDEF
[    5.787858] usb-storage 1-7:1.0: USB Mass Storage device detected
[    5.794221] scsi host4: usb-storage 1-7:1.0
[    6.356211] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
/boot/initrd.gz:  exiting
[    6.512964] scsi 3:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[    6.523969] sr 3:0:0:0: [sr1] scsi-1 drive
[    6.530350] scsi 3:0:0:1: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
[    6.541577] sd 3:0:0:1: [sdd] Attached SCSI removable disk

INIT: version 2.88 booting[    6.804341] scsi 4:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[    6.814827] sr 4:0:0:0: [sr2] scsi-1 drive
[    6.820703] scsi 4:0:0:1: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
[    6.831341] sd 4:0:0:1: [sde] Attached SCSI removable disk
[    7.448179] loop: module loaded
Creating static nodes in /dev.
Starting udevd:  /sbin/udevd --daemon
[    7.877548] udevd[1710]: starting version 3.1.5
Triggering udev [    8.294833] udevd[1711]: starting eudev-3.1.5
events:  /sbin/udevadm trigger --action=add
calling: trigger
calling: trigger
calling: settle
[    8.551340] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    8.559668] ACPI: Power Button [PWRF]
[    8.684168] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    8.697793] ipmi message handler version 39.2
[    8.699429] IPMI System Interface driver.
[    8.699472] ipmi_si: probing via SMBIOS
[    8.699474] ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0
[    8.699475] ipmi_si: Adding SMBIOS-specified kcs state machine
[    8.699478] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
[    8.733270] P-state transition latency capped at 20 uS
[    8.782993] ipmi_si ipmi_si.0: Found new BMC (man_id: 0x000002, prod_id: 0x0011, dev_id: 0x20)
[    8.792504] ipmi_si ipmi_si.0: IPMI kcs interface initialized
[    8.798687] intel_rng: FWH not detected
[    8.803170] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.066571] aacraid: module is already loaded
[    9.085411] aacraid: module is already loaded
[    9.120051] Linux agpgart interface v0.103
[    9.120346] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    9.134167] IPMI SSIF Interface driver
[    9.226251] bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014)
[    9.469880] [drm] Initialized drm 1.1.0 20060810
[    9.565350] bnx2 0000:03:00.0 eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem ce000000, IRQ 16, node addr 00:1a:64:26:34:fc
[    9.911376] bnx2 0000:06:00.0 eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem ca000000, IRQ 17, node addr 00:1a:64:26:34:fe
[    9.994196] ics932s401 0-0069: ics932s401 chip found
[   10.088546] coretemp coretemp.0: Using relative temperature scale!
[   10.095007] coretemp coretemp.0: Using relative temperature scale!
[   10.099586] [drm] radeon kernel modesetting enabled.
[   10.106568] coretemp coretemp.0: Using relative temperature scale!
[   10.113377] coretemp coretemp.0: Using relative temperature scale!
[   10.138035] ipmi_si ipmi_si.0: Found AEM v1.0 at 0x0
[   10.138154] gpio_ich: ACPI BAR is busy, GPI 0 - 15 unavailable
[   10.138244] gpio_ich: GPIO from 462 to 511 on gpio_ich
[   10.143425] ipmi device interface
[   10.146932] i2c /dev entries driver
[   10.162826] ipmi_si ipmi_si.0: Found AEM v2.1 at 0x20
[   10.190429] ipmi_si ipmi_si.0: Found BMC with sensor interface v3.10 2006-06-29 on interface 0
[   10.230833] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[   10.237026] AMD IOMMUv2 functionality not available on this system
[   10.243429] ses 0:3:0:0: Attached Enclosure device
[   10.271967] CRAT table not found
[   10.271970] Finished initializing topology ret=0
[   10.272027] kfd kfd: Initialized module
[   10.272683] [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x1014:0x0305).
[   10.272700] [drm] register mmio base: 0xDFFF0000
[   10.272701] [drm] register mmio size: 65536
[   10.272819] radeon 0000:01:06.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used)
[   10.272821] radeon 0000:01:06.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[   10.272827] [drm] Detected VRAM RAM=128M, BAR=128M
[   10.272828] [drm] RAM width 16bits DDR
[   10.272879] [TTM] Zone  kernel: Available graphics memory: 2017382 kiB
[   10.272880] [TTM] Initializing pool allocator
[   10.272886] [TTM] Initializing DMA pool allocator
[   10.272915] [drm] radeon: 16M of VRAM memory ready
[   10.272915] [drm] radeon: 512M of GTT memory ready.
[   10.272934] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   10.293767] [drm] PCI GART of 512M enabled (table at 0x00000000BAA80000).
[   10.293833] radeon 0000:01:06.0: WB disabled
[   10.293837] radeon 0000:01:06.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff8800bad38000
[   10.293839] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   10.293839] [drm] Driver supports precise vblank timestamp query.
[   10.293855] [drm] radeon: irq initialized.
[   10.293867] [drm] Loading R100 Microcode
[   10.479495] [drm] radeon: ring at 0x00000000B0001000
[   10.484674] [drm] ring test succeeded in 1 usecs
[   10.990076] [drm] ib test succeeded in 0 usecs
[   10.995190] [drm] No valid Ext TMDS info found in BIOS
[   11.000569] [drm] Radeon Display Connectors
[   11.004938] [drm] Connector 0:
[   11.008177] [drm]   VGA-1
[   11.010971] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   11.017161] [drm]   Encoders:
[   11.020301] [drm]     CRT1: INTERNAL_DAC1
[   11.021426] usbcore: registered new interface driver uas
[   11.030101] [drm] Connector 1:
[   11.033344] [drm]   DVI-D-1
[   11.036320] [drm]   HPD2
[   11.039043] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   11.045243] [drm]   Encoders:
[   11.048411] [drm]     DFP2: INTERNAL_DVO1
[   11.120325] sr 4:0:0:0: [sr2] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[   11.128807] sr 4:0:0:0: [sr2] tag#0 Sense Key : 0x3 [current]
[   11.134816] sr 4:0:0:0: [sr2] tag#0 ASC=0x11 ASCQ=0x0
[   11.140131] sr 4:0:0:0: [sr2] tag#0 CDB: opcode=0x28 28 00 00 00 8d fe 00 00 02 00
[   11.147986] blk_update_request: critical medium error, dev sr2, sector 145400
[   11.163133] sr 4:0:0:0: [sr2] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[   11.171606] sr 4:0:0:0: [sr2] tag#0 Sense Key : 0x3 [current]
[   11.177607] sr 4:0:0:0: [sr2] tag#0 ASC=0x11 ASCQ=0x0
[   11.182921] sr 4:0:0:0: [sr2] tag#0 CDB: opcode=0x28 28 00 00 00 8d fe 00 00 02 00
[   11.190781] blk_update_request: critical medium error, dev sr2, sector 145400
[   11.198090] Buffer I/O error on dev sr2, logical block 18175, async page read
[   11.207486] sr 3:0:0:0: [sr1] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[   11.215448] [drm] fb mappable at 0xD0040000
[   11.215449] [drm] vram apper at 0xD0000000
[   11.215449] [drm] size 786432
[   11.215450] [drm] fb depth is 8
[   11.215450] [drm]    pitch is 1024
[   11.235505] sr 3:0:0:0: [sr1] tag#0 Sense Key : 0x3 [current]
[   11.241508] sr 3:0:0:0: [sr1] tag#0 ASC=0x11 ASCQ=0x0
[   11.246815] sr 3:0:0:0: [sr1] tag#0 CDB: opcode=0x28 28 00 00 00 0f fe 00 00 02 00
[   11.254673] blk_update_request: critical medium error, dev sr1, sector 16376
[   11.261983] fbcon: radeondrmfb (fb0) is primary device
[   11.280340] sr 3:0:0:0: [sr1] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[   11.280343] sr 3:0:0:0: [sr1] tag#0 Sense Key : 0x3 [current]
[   11.280345] sr 3:0:0:0: [sr1] tag#0 ASC=0x11 ASCQ=0x0
[   11.280348] sr 3:0:0:0: [sr1] tag#0 CDB: opcode=0x28 28 00 00 00 0f fe 00 00 02 00
[   11.280350] blk_update_request: critical medium error, dev sr1, sector 16376
[   11.280352] Buffer I/O error on dev sr1, logical block 2047, async page read
[   11.587955] Console: switching to colour frame buffer device 128x48
[   11.659782] radeon 0000:01:06.0: fb0: radeondrmfb frame buffer device
[   11.671023] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:06.0 on minor 0
Loading fuse module[   12.076574] fuse init (API version 7.23)
.
Mounting fuse control filesystem failed!
Setting the system clock rate:  /sbin/adjtimex --tick 10000 --frequency 0
Setting system time from the hardware clock (localtime):  Fri Jun  2 18:34:54 CEST 2017
Testing root filesystem status:  read-only filesystem
Checking root filesystem:
fsck from util-linux 2.27.1
/dev/sda1: clean, 586828/3932160[   13.227285] EXT4-fs (sda1): re-mounted. Opts: (null)
 files, 3481857/15728640 blocks
Remounting root device with read-write enabled.
mount: /dev/sda1 mounted on /.
Updating module dependency list for 4.4.38:  /sbin/depmod --quick
Configuring kernel parameters:  /sbin/sysctl -e --system
Checking non-root filesystems:
fsck from util-linux 2.27.1
/dev/sdb1: clean, 178047/91561984 files, 192441984/366231032 blocks
/dev/sdc1: clean, 238287/122093568 files, 205098863/488345592 blocks
Mounting non-root local filesystems:
[   18.020927] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem
[   18.093277] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   18.101956] EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem
[   18.161017] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
/dev/sdb1 on /mnt/dane type ext3 (rw)
/dev/sdc1 on /mnt/kopia_zapasowa type ext3 (ro)
Starting cgmanager:  /usr/sbin/cgmanager --daemon
Using /etc/random-seed to initialize /dev/urandom.

INIT: Entering runlevel: 3Going multiuser...
Updating shared library links:  /sbin/ldconfig &
setterm: cannot (un)set powersave mode: Inappropriate ioctl for device
Starting sysklogd daemons:  /usr/sbin/syslogd ; /usr/sbin/klogd -c 3 -x
Updating X font indexes:  /usr/bin/fc-cache -f &
Updating hardware database index:  /sbin/udevadm hwdb --update
calling: hwdb
reading file '/lib/udev/hwdb.d/20-OUI.hwdb'
reading file '/lib/udev/hwdb.d/20-acpi-vendor.hwdb'
reading file '/lib/udev/hwdb.d/20-bluetooth-vendor-product.hwdb'
reading file '/lib/udev/hwdb.d/20-net-ifname.hwdb'
reading file '/lib/udev/hwdb.d/20-pci-classes.hwdb'
reading file '/lib/udev/hwdb.d/20-pci-vendor-model.hwdb'
reading file '/lib/udev/hwdb.d/20-sdio-classes.hwdb'
reading file '/lib/udev/hwdb.d/20-sdio-vendor-model.hwdb'
reading file '/lib/udev/hwdb.d/20-usb-classes.hwdb'
reading file '/lib/udev/hwdb.d/20-usb-vendor-model.hwdb'
reading file '/lib/udev/hwdb.d/60-evdev.hwdb'
reading file '/lib/udev/hwdb.d/60-keyboard.hwdb'
reading file '/lib/udev/hwdb.d/69-libmtp.hwdb'
reading file '/lib/udev/hwdb.d/70-mouse.hwdb'
reading file '/lib/udev/hwdb.d/70-pointingstick.hwdb'
=== trie in-memory ===
nodes:             3855000 bytes (   96375)
children arrays:   1541984 bytes (   96374)
values arrays:     1175488 bytes (   73468)
strings:           1716774 bytes
strings incoming:  3902697 bytes (  229222)
strings dedup'ed:  2248784 bytes (  166362)
=== trie on-disk ===
size:              6747326 bytes
header:                 80 bytes
nodes:             2313000 bytes (   96375)
child pointers:    1541984 bytes (   96374)
value pointers:    1175488 bytes (   73468)
string store:      1716774 bytes
strings start:     5030552
Triggering udev events:  /sbin/udevadm trigger --action=change
calling: trigger
calling: trigger
calling: settle
Starting system message bus:  /usr/bin/dbus-uuidgen --ensure ; /usr/bin/dbus-daemon --system
Unknown username "polkitd" in message bus configuration file
Unknown username "polkitd" in message bus configuration file
Unknown username "pulse" in message bus configuration file
Enabling ip_forwarding...
Activating IPv4 packet forwarding.
Starting Internet super-server daemon:  /usr/sbin/inetd
Starting OpenSSH SSH daemon:  /usr/sbin/sshd
Starting ACPI daemon:  /usr/sbin/acpid
Enabled CPU frequency scaling governor:  ondemand
Updating MIME database:  /usr/bin/update-mime-database /usr/share/mime &
Starting ConsoleKit daemon:  /usr/sbin/console-kit-daemon
Updating gtk.immodules:
  /usr/bin/update-gtk-immodules &
Updating gdk-pixbuf.loaders:
  /usr/bin/update-gdk-pixbuf-loaders &
Compiling GSettings XML schema files:
  /usr/bin/glib-compile-schemas /usr/share/glib-2.0/schemas &
Loading 256-char 8x16 font from file /usr/share/kbd/consolefonts/lat2-16.psfu.gz
Loading Unicode mapping table...
170602 18:35:10 mysqld_safe Logging to '/var/lib/mysql/ibmserwer.err'.
170602 18:35:11 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
Starting Samba:  /usr/sbin/smbd -D
                 /usr/sbin/nmbd -D
Starting gpm:  /usr/sbin/gpm -m /dev/mouse -t imps2
Starting apcupsd power management..  Done.
Starting dhcpd:  /usr/sbin/dhcpd -q eth0
170602 18:35:17 mysqld_safe mysqld from pid file /var/run/mysql/mysql.pid ended



Offline Profile
PostPosted: Tue Jun 13, 2017 10:17 am Reply with quote
Posts: 2Joined: Mon Jun 05, 2017 3:03 pm
I fix it my self. In short upgrade usb_modeswitch from 2.2.x to current 2.5.0 helps.


Offline Profile

Display posts from previous:  Sort by:

All times are UTC + 1 hour [ DST ]
Page 1 of 1
2 posts
Users browsing this forum: No registered users and 2 guests
Search for:
Post new topic  Reply to topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum