Author Message

<  Device Information  ~  New devices

PostPosted: Fri Feb 13, 2015 8:16 am Reply with quote
Posts: 3 Joined: Thu Feb 24, 2011 8:09 pm
Huwei E3372s-153 (from Polish Orange)

12d1:15cf

Code:
# Huawei E3372
TargetVendor=0x12d1
TargetProduct=0x1506
HuaweiNewMode=1


Huawei E5377 (Polish Orange/Play)

12d1:1f02

Code:
# Huawei E5377

TargetVendor=  0x12d1
TargetProduct= 0x14dc

MessageContent="55534243123456780000000000000a11062000000000000100000000000000"
NoDriverLoading=1


Offline
PostPosted: Fri Feb 13, 2015 11:53 am Reply with quote
Posts: 1175 Joined: Wed Jul 11, 2012 3:14 pm Location: Koh Samui, TH
Thanks for the report, those devices will be added to next release of the datapackage.

The switch message you have listed for E5377 is not a standard one, HuaweiNewMode should work and should be used for all Huawei dongles except for a few very old ones which uses HuaweiMode.


Offline
PostPosted: Mon Mar 09, 2015 11:46 pm Reply with quote
Posts: 3 Joined: Thu Feb 24, 2011 8:09 pm
And next:

1782:0003

Code:
# Spreadtrum SC7702 HSPA+ Datacard
Configuration=2


Offline
PostPosted: Wed Mar 11, 2015 12:52 am Reply with quote
Site Admin Posts: 6443 Joined: Sat Nov 03, 2007 12:30 am
Thanks for that one too !!

Would you mind posting the complete output of "sudo lsusb -v -d 1782:0003" with that stick attached?


Offline
PostPosted: Sun Mar 29, 2015 8:25 pm Reply with quote
Posts: 4 Joined: Sun Mar 29, 2015 8:17 pm
Hello

I have huawei e3372 detected as 12d1 155f connected with otg cable on carpad nu3001.
It doesn't work with ppp widget 2.
I have seen that i have to create a file in usb_modeswitch.d with name 12d1_155f
I put :
TargetVendor=0x12d1
TargetProduct=0x1506
HuaweiNewMode=1
in the file but it doesn't work too.

Can you help me please ?

Bye


Offline
PostPosted: Mon Mar 30, 2015 6:03 am Reply with quote
Posts: 1175 Joined: Wed Jul 11, 2012 3:14 pm Location: Koh Samui, TH
jipite wrote:

I have huawei e3372 detected as 12d1 155f connected with otg cable on carpad nu3001.
It doesn't work with ppp widget 2.
I have seen that i have to create a file in usb_modeswitch.d with name 12d1_155f
I put :
TargetVendor=0x12d1
TargetProduct=0x1506
HuaweiNewMode=1
in the file but it doesn't work too.



12d1:155f is a new usb id not seen before and there are no google hits for it on the net.
How do you know that it should become 12d1:1506 after mode switching?


Offline
PostPosted: Mon Mar 30, 2015 7:45 am Reply with quote
Posts: 4 Joined: Sun Mar 29, 2015 8:17 pm
Hello

I have seen it in the post of Cesary.

Bye


Offline
PostPosted: Mon Mar 30, 2015 5:26 pm Reply with quote
Posts: 1175 Joined: Wed Jul 11, 2012 3:14 pm Location: Koh Samui, TH
jipite wrote:
Hello

I have seen it in the post of Cesary.

Bye


His usb id was 12d1:15cf before switching, not same as yours.


Offline
PostPosted: Tue Mar 31, 2015 7:27 pm Reply with quote
Posts: 6 Joined: Fri Mar 27, 2015 11:34 am
jipite wrote:
Hello

I have huawei e3372 detected as 12d1 155f connected with otg cable on carpad nu3001.
It doesn't work with ppp widget 2.
I have seen that i have to create a file in usb_modeswitch.d with name 12d1_155f
I put :
TargetVendor=0x12d1
TargetProduct=0x1506
HuaweiNewMode=1
in the file but it doesn't work too.

Can you help me please ?

Bye


I have also an E3372 but 12d1:15cd. For me it works with latest usb_modeswitch and -J by becoming 12d1:1506. You should check the version of your usb_modeswitch. I was testing on Linux Mint and had to remove the version that came with it by default and make install of the latest version and make install of the latest data package.

P.S. While testing on my router, I somehow managed to put the device, but only once, in 12d1:155f mode. But that was only one time. All other times the device became for me 12d1:1506.


Offline
PostPosted: Tue Apr 14, 2015 4:28 pm Reply with quote
Posts: 1175 Joined: Wed Jul 11, 2012 3:14 pm Location: Koh Samui, TH
Josh wrote:
Thanks for that one too !!

Would you mind posting the complete output of "sudo lsusb -v -d 1782:0003" with that stick attached?



T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(unk. ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2
P: Vendor=1782 ProdID=0003 Rev= 0.00
S: Manufacturer=Spreadtrum
S: Product=SC7702 HSPA+ Datacard
S: SerialNumber=2BAC9D813F231176
C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA

I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

C:* #Ifs= 5 Cfg#= 2 Atr=80 MxPwr=250mA

I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=125us


Offline

Display posts from previous:  Sort by:

All times are UTC+02:00
Page 1 of 1
10 posts
Users browsing this forum: No registered users and 1 guest
Search for:
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum