Author Message

<  Device Information  ~  Huawei E5577Cs-321 - no ttyUSB

PostPosted: Sun Jan 28, 2018 12:24 pm Reply with quote
Posts: 1Joined: Sun Jan 28, 2018 12:11 pm
Hallo,

I have a Huawei E5577Cs-321.

usb_modeswitch -e gives me:
* usb_modeswitch: handle USB devices with multiple modes
* Version 2.5.2 (C) Josua Dietze 2017
* Based on libusb1/libusbx

! PLEASE REPORT NEW CONFIGURATIONS !

lsusb gives me:
Bus 001 Device 004: ID 12d1:14dc Huawei Technologies Co., Ltd.

usb-devices gives me:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=14dc Rev=01.02
S: Manufacturer=HUAWEI_MOBILE
S: Product=HUAWEI_MOBILE
C: #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=2mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=cdc_ether
I: If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

dmes g| greb usb gives me:
[ 688.395620] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 688.537263] usb 1-2: New USB device found, idVendor=12d1, idProduct=1f01
[ 688.537271] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 688.537275] usb 1-2: Product: HUAWEI_MOBILE
[ 688.537278] usb 1-2: Manufacturer: HUAWEI_MOBILE
[ 688.537280] usb 1-2: SerialNumber: xxxxxxxxxxxxxxxx
[ 688.538612] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 688.539001] scsi host7: usb-storage 1-2:1.0
[ 689.129037] usb 1-2: USB disconnect, device number 3
[ 689.551568] usb 1-2: new high-speed USB device number 4 using xhci_hcd
[ 689.693173] usb 1-2: New USB device found, idVendor=12d1, idProduct=14dc
[ 689.693182] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 689.693185] usb 1-2: Product: HUAWEI_MOBILE
[ 689.693188] usb 1-2: Manufacturer: HUAWEI_MOBILE
[ 689.696320] usb-storage 1-2:1.2: USB Mass Storage device detected
[ 689.696499] scsi host7: usb-storage 1-2:1.2
[ 689.732765] cdc_ether 1-2:1.0 eth1: register 'cdc_ether' at usb-0000:00:14.0-2, CDC Ethernet Device, 0c:5b:8f:27:9a:64
[ 689.732813] usbcore: registered new interface driver cdc_ether

I think usb_modeswitch switches correctly, but I have no ttyUSB. How can I get it?

Thank you for your help!


Offline Profile
PostPosted: Sun Jan 28, 2018 3:22 pm Reply with quote
Posts: 1156Location: Koh Samui, THJoined: Wed Jul 11, 2012 3:14 pm
johannu wrote:
I have no ttyUSB. How can I get it?

Thank you for your help!


You can't.
This is not a dialup modem, it is a LTE CAT4 router and management of it is handled through its built-in web server over the usb ethernet interface or over wifi.


Offline Profile
PostPosted: Fri Mar 09, 2018 2:30 pm Reply with quote
Posts: 2Joined: Wed Mar 07, 2018 8:26 pm
Hello and thank you for all the great work.
I just subscribed because I have a Huawei E5573Cs-322 that should be related to the 5577Cs-321.
I can install it on windows and mac, and it seems to be switching on my openwrt and LEDE virtual machines, but I am struggling to find the Message for the switching. The reason why I need the message is because my router can use the usb modems as failover but it fails to install this one, even if it recognise it as E3531/E3276 and I was wondering if I could do anything about this.
Regards
Lila


Offline Profile
PostPosted: Mon Mar 12, 2018 7:46 am Reply with quote
Posts: 1156Location: Koh Samui, THJoined: Wed Jul 11, 2012 3:14 pm
lila wrote:
Hello and thank you for all the great work.
I just subscribed because I have a Huawei E5573Cs-322 that should be related to the 5577Cs-321.
I can install it on windows and mac, and it seems to be switching on my openwrt and LEDE virtual machines, but I am struggling to find the Message for the switching. The reason why I need the message is because my router can use the usb modems as failover but it fails to install this one, even if it recognise it as E3531/E3276 and I was wondering if I could do anything about this.


Please provide a verbose lsusb listing for your device so I can see what kind of interfaces it has in default mode.

lsusb -v -d vid:pid


Offline Profile
PostPosted: Wed Mar 28, 2018 6:13 am Reply with quote
Posts: 2Joined: Wed Mar 07, 2018 8:26 pm
Thank you for your answer and sorry for not posting. I will try to get a way for posting the informations needed, but since I'm on LEDE on a virtual box I seem unable to provide the requested output. I'm going to ask a friend with the same device if they can help me.


Offline Profile

Display posts from previous:  Sort by:

All times are UTC + 1 hour [ DST ]
Page 1 of 1
5 posts
Users browsing this forum: Baidu [Spider] and 3 guests
Search for:
Post new topic  Reply to topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum