idProduct=8700
Mode switching is similar to most Option devices.
Product ID changes to 8701 after a successful switch. You need the CDC Ethernet Device driver compiled into the kernel or as a module. Once the module is loaded you will have an new Ethernet interface. Run dhcpcd on the new Ethernet interface to get an IP address from the XYFI modem/router.
Code: Select all
#######################################################
# Option HSO device
DefaultVendor= 0x0af0
DefaultProduct= 0x8700
TargetClass= 0xff
CheckSuccess=10
MessageContent="55534243785634120100000080000601000000000000000000000000000000"
NoDriverLoading=1