Author Message

<  Setup Discussion  ~  Novatel 730L error

PostPosted: Mon Jan 22, 2018 2:56 am Reply with quote
Posts: 1 Joined: Mon Jan 22, 2018 2:50 am
According to the guide here https://www.verizonwireless.com/dam/sup ... -guide.pdf
this is the command to change the mode but it is not working. Anything I can do?

henning@egads:/etc/udev/rules.d$ sudo usb_modeswitch -v 0x1410 -p 0x9030 -u 2
Look for default devices ...
product ID matched
Get the current device configuration ...
Found devices in default mode (1)
Access device 030 on bus 001
Current configuration number is 1
Use interface number 0

USB description data (for identification)
-------------------------
Manufacturer: Novatel Wireless
Product: MiFi USB730L
Serial No.: 0123456789ABCDEF
-------------------------
Change configuration to 2 ...
Device is busy, try to detach kernel driver
Looking for active driver ...
OK, driver detached
Device is busy, try to detach kernel driver
Looking for active driver ...
No active driver found. Detached before or never attached
Device is busy, try to detach kernel driver
Looking for active driver ...
No active driver found. Detached before or never attached
Device is busy, try to detach kernel driver
Looking for active driver ...
No active driver found. Detached before or never attached
Changing the configuration failed (error -6). Try to continue
-> Run lsusb to note any changes. Bye!


Offline
PostPosted: Wed Jan 24, 2018 12:03 pm Reply with quote
Posts: 1175 Joined: Wed Jul 11, 2012 3:14 pm Location: Koh Samui, TH
Do you use the latest version of usb_modeswitch?

viewtopic.php?f=5&t=2759


Offline

Display posts from previous:  Sort by:

All times are UTC+02:00
Page 1 of 1
2 posts
Users browsing this forum: No registered users and 1 guest
Search for:
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum