Author Message

<  Setup Discussion  ~  Huawei E3533 not showing ttyusb

PostPosted: Thu Feb 22, 2018 1:45 pm Reply with quote
Posts: 2 Joined: Thu Feb 22, 2018 11:14 am
Hi, I'm trying to setup my Huawei E3533 using the following guide:
https://www.contextis.com/blog/binary-s ... -new-thing
in the guide he have the same model as mine but icant see any ttyusb with my stick, the stick work fine and give me internet but I dont want to use the internet i just want to be able to send sms using it, thats why i need ttyusb to be able to send sms.
lsusb
Code:
Bus 001 Device 014: ID 12d1:14db Huawei Technologies Co., Ltd. E353/E3131


Code:
[  222.038610] usb 1-1: new high-speed USB device number 3 using ehci-pci
[  222.356875] usb 1-1: New USB device found, idVendor=12d1, idProduct=14db
[  222.356881] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  222.356883] usb 1-1: Product: HUAWEI Mobile
[  222.356885] usb 1-1: Manufacturer: HUAWEI
[  222.456418] rndis_host 1-1:1.0 eth0: register 'rndis_host' at usb-0000:02:03.0-1, RNDIS device, 00:1e:10:1f:00:00
[  222.487544] IPv6: ADDRCONF(NETDEV_UP): ens35u1: link is not ready


any help will be appreciated.
Thanks


Offline
PostPosted: Thu Feb 22, 2018 2:48 pm Reply with quote
Posts: 1166 Joined: Wed Jul 11, 2012 3:14 pm Location: Koh Samui, TH
12d1:14db has ethernet interfaces (cdc_ether linux driver) when using the normal usb_modeswitch control message.
The author of the blog has used the alternative mode switch message intended for Android and gets serial (ttyUSB) interfaces, you do get rndis interfaces instead.
Since you both have the same E3533 then it must be a matter of dongle firmware difference
and there is nothing usb_modeswitch can do to fix that.

If you want old fashion serial interfaces then you'd better by an old fashion dongle.


Offline
PostPosted: Thu Feb 22, 2018 6:38 pm Reply with quote
Posts: 2 Joined: Thu Feb 22, 2018 11:14 am
LOM wrote:
12d1:14db has ethernet interfaces (cdc_ether linux driver) when using the normal usb_modeswitch control message.
The author of the blog has used the alternative mode switch message intended for Android and gets serial (ttyUSB) interfaces, you do get rndis interfaces instead.
Since you both have the same E3533 then it must be a matter of dongle firmware difference
and there is nothing usb_modeswitch can do to fix that.

If you want old fashion serial interfaces then you'd better by an old fashion dongle.


Thank you for your info, I will try to contact the author to get some info about the firmware, and see what happen.


Offline

Display posts from previous:  Sort by:

All times are UTC+02:00
Page 1 of 1
3 posts
Users browsing this forum: No registered users and 3 guests
Search for:
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum