NU/Quanta MU-Q101 ("lipstick") modem - Page 2

sfe · Post by **sfe** » 24 Jul 2008, 12:17

What device you use to connect ? (ttyUSB0 ~ 3)
What tools yous use to dial ? (pppd, wvdial, kppp)

mixmaxtw · Post by **mixmaxtw** » 24 Jul 2008, 16:25

I use ttyUSB2... that was mentioned somewhere in this thread. Is there any documentation about which of the 4 ttyUSB devices is used for what?

For dialing I use pppd.

sfe · Post by **sfe** » 25 Jul 2008, 10:07

But I ust ttyUSB0 to connect
ttyUSB1 can't usb AT COMMAND
ttyUSB2, ttyUSB3 can get status when ttyUSB0 is connecting.

For dialing I use pppd, too.

joke_dst · Post by **joke_dst** » 13 Aug 2008, 14:14

I updated my modem with a new firmware from the manufacturer, and now I can't send AT commands any more! I can in my laptop which I have kernel 2.6.17 in, but not in my router which uses 2.4.25

I've patched up the usbserial to 2.4.36 version, but it still doesn't work. Does anyone have any ideas what may be causing this? I still get the tty:s up, but can't talk through them.

Post by **Josh** » 29 Oct 2008, 14:30

Is there any news about this device with new firmware? In Stockholm or in Taiwan?

joke_dst · Post by **joke_dst** » 29 Oct 2008, 14:53

Not really. What I'm doing right now is when the device shows up, as Vendor=0x0408 / ProdID=0x1000, I send

usb_modeswitch -v 0x0408 -p 0x1000 -m 0x05 -M 55534243153311110000000000000600000000000000000000000000000000 -n 1 -r 0x84

Then I reboot my machine (a router). When it's booted the modem appears as Vendor=0x0408 / ProdID=0xea02

To call I have to send "AT+CFUN=1" to it on /dev/ttyUSB2 first.