Author Message

<  Device Information  ~  MediaTek MT7118 Wimax Usb Card?

PostPosted: Wed Dec 01, 2010 3:06 pm Reply with quote
Posts: 9 Joined: Wed Dec 01, 2010 3:00 pm
Need help to run / configure / install MediaTek Wimax Usb card in Ubuntu 10.4.
All helping answers are warmly welcome.


Offline
PostPosted: Thu Dec 02, 2010 9:37 am Reply with quote
Site Admin Posts: 6524 Joined: Sat Nov 03, 2007 12:30 am
Let's start with running "lsusb". If you can identify your device from the compact listing, get the details with
"lsusb -v-d <your:id>".


Offline
PostPosted: Sat Dec 04, 2010 8:27 am Reply with quote
Posts: 9 Joined: Wed Dec 01, 2010 3:00 pm
Josh wrote:
Let's start with running "lsusb". If you can identify your device from the compact listing, get the details with
"lsusb -v-d <your:id>".


Sorry for replying late any how jousa these are the results.

mak@ubuntu:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 0e8d:7109 MediaTek Inc.
Bus 002 Device 004: ID 15d9:0a33 Trust International B.V. Optical Mouse
Bus 002 Device 003: ID 03eb:0902 Atmel Corp. 4-Port Hub
Bus 002 Device 002: ID 12d1:1412 Huawei Technologies Co., Ltd.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
mak@ubuntu:~$ lsusb -v -d 0e8d:7109

Code:
Bus 002 Device 005: ID 0e8d:7109 MediaTek Inc.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0e8d MediaTek Inc.
  idProduct          0x7109
  bcdDevice            1.00
  iManufacturer           3
  iProduct                4
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
mak@ubuntu:~$


Now pls tell me next step

And with as Super root command

mak@ubuntu:~$ sudo lsusb -v -d 0e8d:7109
Code:
Bus 002 Device 005: ID 0e8d:7109 MediaTek Inc.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0e8d MediaTek Inc.
  idProduct          0x7109
  bcdDevice            1.00
  iManufacturer           3 MediaTek Inc.
  iProduct                4 WiMAX USB Card
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol       255 Vendor Specific Protocol
  bMaxPacketSize0        64
  bNumConfigurations      0
Device Status:     0x0000
  (Bus Powered)

mak@ubuntu:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 0e8d:7109 MediaTek Inc.
Bus 002 Device 004: ID 15d9:0a33 Trust International B.V. Optical Mouse
Bus 002 Device 003: ID 03eb:0902 Atmel Corp. 4-Port Hub
Bus 002 Device 002: ID 12d1:1412 Huawei Technologies Co., Ltd.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
mak@ubuntu:~$


Offline
PostPosted: Sat Dec 04, 2010 10:09 am Reply with quote
Site Admin Posts: 6524 Joined: Sat Nov 03, 2007 12:30 am
O.K., fine.

Basically there are two ways possible:
  1. You are able to switch with an often-used command for ejecting the "pseudo CDROM"; then you are good to go
  2. If number 1 does not work, you have to spy on the Windows driver and what it is doing to the device. There are links and examples on the main doc page, paragraph "Contribute".
But first, let's try this (always as superuser):

usb_modeswitch -I -v 0e8d -p 7109 -M "5553424312345679000000000000061b000000020000000000000000000000"



Offline
PostPosted: Sun Dec 05, 2010 4:47 am Reply with quote
Posts: 9 Joined: Wed Dec 01, 2010 3:00 pm
Thank you Josh now the results are as superuser.

mak@ubuntu:~$ sudo usb_modeswitch -I -v 0e8d -p 7109 -M "5553424312345679000000000000061b000000020000000000000000000000"

Looking for default devices ...
Found default devices (1)
Accessing device 006 on bus 001 ...

USB description data (for identification)
-------------------------
Manufacturer: MediaTek Inc.
Product: WiMAX USB Card
Serial No.: not provided
-------------------------
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
Setting up communication with interface 0 ...
Trying to send the message to endpoint 0x02 ...
OK, message successfully sent
-> Run lsusb to note any changes. Bye.

mak@ubuntu:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 15d9:0a33 Trust International B.V. Optical Mouse
Bus 002 Device 002: ID 03eb:0902 Atmel Corp. 4-Port Hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 0e8d:7109 MediaTek Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Please Tell me next step. I also got the sniffUSB TXT file but it is to long to be in post so if u want that i can attach the file with your email.


Offline
PostPosted: Sun Dec 05, 2010 1:07 pm Reply with quote
Site Admin Posts: 6524 Joined: Sat Nov 03, 2007 12:30 am
So the "eject" command did not do anything. Well, now we know.

Yes, you can send the sniffing log with e-mail, but please compress it first (with zip or gzip).



Offline
PostPosted: Sun Dec 05, 2010 4:33 pm Reply with quote
Site Admin Posts: 6524 Joined: Sat Nov 03, 2007 12:30 am
O.K., I received your log file. Unfortunately, the passage that you logged is not useful. It is important that you install the sniffing filter on the correct device in Windows. And you have to start logging before you plug in.

- Make sure Windows drivers are installed.
- Check the box "List Devices Not Present".
- Look for "Vid_0e8d" and "Pid_7109" in the device list.
- It probably has a name with "Mass Storage" - or no name at all.
- Remove any other filters in the list.
- "Install Filter" on this device.
- Make log empty ("Delete Log")).
- Start logging ("Resume Log").
- Plug in.
- Press "Refresh" from time to time.
- The log will most likely stop growing.
- Then finish the logging ("Pause ..." and "Close ...").



Offline
PostPosted: Sun Dec 05, 2010 8:49 pm Reply with quote
Posts: 9 Joined: Wed Dec 01, 2010 3:00 pm
Thank you for correction. Now i am again sending you the log file of device = 0e8d:7109.

Josh i let you one thing when first time i see the result of lsusb of device it shows device ID= 0e8d:7118 then after it changed into (0e8d:7109) maybe i use some command like modeprobe or some else.

Any how for your kind review i am sending both (0e8d:7109) and (0e8d:7118) usb snoop log files.

I am very mush interested in learning of this process so be with me.

Waiting for your answer.


Offline
PostPosted: Sun Dec 05, 2010 10:11 pm Reply with quote
Site Admin Posts: 6524 Joined: Sat Nov 03, 2007 12:30 am
I think I could spot the right sequence.

Principally, the device after switching is not interesting, what you can sniff there is just the normal modem initialization traffic.

But your first log for 0e8d:7109 contains the moment of switching; see the time mark [38310082 ms]. There the Windows USB system is seeing a IRP_MN_SURPRISE_REMOVAL.
This is where your first device (0e8d:7109) is going away. It is not much different than being unplugged.

Now, obviously the commands immediately before that moments are suspicious. And what we find is a sequence that is known from BandLuxe devices.

See "[38310045 ms] >>> URB 138 going down >>>"
and "[38310046 ms] >>> URB 140 going down >>>".

Look at the messages: you known the one in URB 140 because you already tried that. It's the "eject" command again.
But there is annother command preceding it; in URB 138 is a message that says "06 1e" where the eject command says "06 1b". This command enables the following eject.

You can read about storage commands here:
http://www.usb.org/developers/devclass_ ... -ufi10.pdf

Coming back to your device, you can test the following configuration. Put it in a file named "0e8d:7109" into the folder "/etc/usb_modeswitch.d":
Code:
########################################################
# MediaTek Wimax USB Card

DefaultVendor= 0x0e8d
DefaultProduct=0x7109

TargetVendor=  0x0e8d
TargetProduct= 0x7118

MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"

NeedResponse=1

CheckSuccess=20
First run it manually with "usb_modeswitch -I -c /etc/usb_modeswitch.d/0e8d:7109" and see what happens.



Offline
PostPosted: Mon Dec 06, 2010 5:07 am Reply with quote
Posts: 9 Joined: Wed Dec 01, 2010 3:00 pm
Hi,
Josh as per your instruction firstly i run the command "usb_modeswitch -I -c /etc/usb_modeswitch.d/0e8d:7109" as superuser and message came like error reading file.

Then i build the file name 0e8d:7109 in ///usb_modeswitch.d and the result are as under:

mak@ubuntu:~$ sudo usb_modeswitch -I -c /etc/usb_modeswitch.d/0e8d:7109
[sudo] password for mak:

Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
Found default devices (1)
Accessing device 002 on bus 001 ...
Using endpoints 0x02 (out) and 0x81 (in)

USB description data (for identification)
-------------------------
Manufacturer: MediaTek Inc.
Product: WiMAX USB Card
Serial No.: not provided
-------------------------
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
Setting up communication with interface 0 ...
Trying to send the message to endpoint 0x02 ...
OK, message successfully sent
Reading the response to the message ...
OK, response successfully read (13 bytes).

Checking for mode switch (max. 20 times, once per second) ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Original device still present after the timeout

Mode switch most likely failed. Bye.

mak@ubuntu:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 12d1:1412 Huawei Technologies Co., Ltd.
Bus 002 Device 003: ID 15d9:0a33 Trust International B.V. Optical Mouse
Bus 002 Device 002: ID 03eb:0902 Atmel Corp. 4-Port Hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0e8d:7109 MediaTek Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
mak@ubuntu:~$

It seems that eject command works but cannot get it back to 0e8d:7118 to initialize the modem.
Looking forward for your reply on this issue now.


Offline
PostPosted: Mon Dec 06, 2010 8:56 am Reply with quote
Site Admin Posts: 6524 Joined: Sat Nov 03, 2007 12:30 am
Hmm, but there seems to be only the first message sent. You should have two messages and two responses.

Are you running an older version of usb_modeswitch ?
The feature to send more than one command message was added in 1.1.2. If you have to upgrade anyway I'd recommend the latest version 1.1.5; it's already available as a Debian package:

http://packages.debian.org/experimental/usb-modeswitch

And the data package:

http://packages.debian.org/experimental ... witch-data



Offline
PostPosted: Mon Dec 06, 2010 10:03 am Reply with quote
Posts: 9 Joined: Wed Dec 01, 2010 3:00 pm
Ok i have updated both of them and now the results are.

mak@ubuntu:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 12d1:1412 Huawei Technologies Co., Ltd.
Bus 002 Device 003: ID 15d9:0a33 Trust International B.V. Optical Mouse
Bus 002 Device 002: ID 03eb:0902 Atmel Corp. 4-Port Hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0e8d:7109 MediaTek Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
mak@ubuntu:~$ sudo usb_modeswitch -I -c /etc/usb_modeswitch.d/0e8d:7109
[sudo] password for mak:

Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
Found devices in default mode or class (1)
Accessing device 003 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using endpoints 0x02 (out) and 0x81 (in)
Using endpoints 0x02 (out) and 0x81 (in)

USB description data (for identification)
-------------------------
Manufacturer: MediaTek Inc.
Product: WiMAX USB Card
Serial No.: not provided
-------------------------
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
Setting up communication with interface 0 ...
Using endpoint 0x02 for message sending ...
Trying to send message 1 to endpoint 0x02 ...
OK, message successfully sent
Reading the response to the message (CSW) ...
OK, response successfully read (13 bytes).
Trying to send message 2 to endpoint 0x02 ...
OK, message successfully sent
Reading the response to message 2 ...
Device seems to have vanished after reading. Good.
Device is gone, skipping any further commands

Checking for mode switch (max. 20 times, once per second) ...
Searching for target devices ...

Found target device, now opening
Found correct target device

Mode switch succeeded. Bye.

mak@ubuntu:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 12d1:1412 Huawei Technologies Co., Ltd.
Bus 002 Device 003: ID 15d9:0a33 Trust International B.V. Optical Mouse
Bus 002 Device 002: ID 03eb:0902 Atmel Corp. 4-Port Hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0e8d:7118 MediaTek Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
mak@ubuntu:~$

well now the both things are working what is the next step to scan modem and to connect it to the Internet.


Offline
PostPosted: Mon Dec 06, 2010 12:37 pm Reply with quote
Site Admin Posts: 6524 Joined: Sat Nov 03, 2007 12:30 am
That's much better!

There is only one more thing to do:

You need a line for your device in "/lib/udev/rules.d/40-usb_modeswitch.rules". Have a look at the other lines, it is really easy to see what has to be done. The line must contain the "7109" product ID.

Once you completed this everything should work automatically, including adding the driver to the modem.



Offline
PostPosted: Mon Dec 06, 2010 4:02 pm Reply with quote
Posts: 9 Joined: Wed Dec 01, 2010 3:00 pm
Hi,
Josh as per instruction i added simply this line
/// # MediaTek MT7118 Wimax Usb Card (Qubee PK)
ATTRS{idVendor}=="0e8d", ATTRS{idProduct}=="7109", RUN+="usb_modeswitch '%b/%k'" ///

After rule file the result is as under.

mak@ubuntu:~$ sudo usb_modeswitch -I -c /etc/usb_modeswitch.d/0e8d:7109
[sudo] password for mak:

Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
Found devices in default mode or class (1)
Accessing device 004 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using endpoints 0x02 (out) and 0x81 (in)
Using endpoints 0x02 (out) and 0x81 (in)

USB description data (for identification)
-------------------------
Manufacturer: MediaTek Inc.
Product: WiMAX USB Card
Serial No.: not provided
-------------------------
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
Setting up communication with interface 0 ...
Using endpoint 0x02 for message sending ...
Trying to send message 1 to endpoint 0x02 ...
OK, message successfully sent
Reading the response to the message (CSW) ...
OK, response successfully read (13 bytes).
Trying to send message 2 to endpoint 0x02 ...
OK, message successfully sent
Reading the response to message 2 ...
OK, response successfully read (13 bytes).
Resetting response endpoint 0x81
Error resetting endpoint: -19
Resetting message endpoint 0x02
Error resetting endpoint: -19
Device is gone, skipping any further commands

Checking for mode switch (max. 20 times, once per second) ...
Searching for target devices ...

Found target device, now opening
Found correct target device

Mode switch succeeded. Bye.

mak@ubuntu:~$



:lol:


And when device is plugged in and system boot the result are like this.


mak@ubuntu:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 12d1:1412 Huawei Technologies Co., Ltd.
Bus 002 Device 003: ID 15d9:0a33 Trust International B.V. Optical Mouse
Bus 002 Device 002: ID 03eb:0902 Atmel Corp. 4-Port Hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0e8d:7109 MediaTek Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
mak@ubuntu:~$ lsmod | grep usb
usbserial 33019 4 option
usbhid 36110 0
hid 67032 1 usbhid
usb_storage 39553 2
mak@ubuntu:~$ sudo modprobe usbserial vendor=0x0e8d product=0x7109
[sudo] password for mak:
mak@ubuntu:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 12d1:1412 Huawei Technologies Co., Ltd.
Bus 002 Device 003: ID 15d9:0a33 Trust International B.V. Optical Mouse
Bus 002 Device 002: ID 03eb:0902 Atmel Corp. 4-Port Hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0e8d:7109 MediaTek Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
mak@ubuntu:~$ sudo usb_modeswitch -I -c /etc/usb_modeswitch.d/0e8d:7109

Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
Found devices in default mode or class (1)
Accessing device 002 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using endpoints 0x02 (out) and 0x81 (in)
Using endpoints 0x02 (out) and 0x81 (in)

USB description data (for identification)
-------------------------
Manufacturer: MediaTek Inc.
Product: WiMAX USB Card
Serial No.: not provided
-------------------------
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
Setting up communication with interface 0 ...
Using endpoint 0x02 for message sending ...
Trying to send message 1 to endpoint 0x02 ...
OK, message successfully sent
Reading the response to the message (CSW) ...
OK, response successfully read (13 bytes).
Trying to send message 2 to endpoint 0x02 ...
OK, message successfully sent
Reading the response to message 2 ...
Device seems to have vanished after reading. Good.
Device is gone, skipping any further commands

Checking for mode switch (max. 20 times, once per second) ...
Searching for target devices ...

Found target device, now opening
Found correct target device

Mode switch succeeded. Bye.

mak@ubuntu:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 12d1:1412 Huawei Technologies Co., Ltd.
Bus 002 Device 003: ID 15d9:0a33 Trust International B.V. Optical Mouse
Bus 002 Device 002: ID 03eb:0902 Atmel Corp. 4-Port Hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0e8d:7118 MediaTek Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
mak@ubuntu:~$

Please tell me in detail the next step.May be i am doing some thing wrong or may be in wrong sequence.


Offline
PostPosted: Mon Dec 06, 2010 7:11 pm Reply with quote
Site Admin Posts: 6524 Joined: Sat Nov 03, 2007 12:30 am
Everything looks really good.

Forget about the errors in the output, they are expected because the device is gone already which means the switch succeeded.

With a simple "dmesg" command you can check if the driver has bound to the modem. Look for messages containing "ttyUSB0" or similar. If you see them after switching, you are all set.



Offline

Display posts from previous:  Sort by:

All times are UTC+02:00
Page 1 of 2
19 posts
Go to page 1 2 Next
Users browsing this forum: No registered users and 11 guests
Search for:
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum