subject: shenzhen strong rising usb modem (=qualcomm in windows)
installed all package
not installed but have
would i install this for version compliance ?
intel motherboard processor pentium 4 memory 512 mb used 147mb puppy linux 0.43 audio adapter 82891db-ich4 intel x11 vendor x.org kernel linux 188.8.131.52(i686)compiled #1 smp gnu clibrary version 2.6.1 stable default c compiler unknown desktop environment unknown (window manager jwm) kernel moduls - lp, snd_pcm_oss,snd_seq_dummy,snd_seq_oss,..,slamr.......usbcore ehci_hcd,uhci_hcd,squashfs,usb_storage ,usbhid
here is qualcomm based modem in usb device product id 0x1000
usb devices -uhci host controller -strong rising co. manufacturer -qualcomm, incorporated port#1 speed 12.00 Mb/s max current 100mA usb version 1.10 revision 0.00 product id 0x1000 bus 4 level 1
here is storage cdrom stronrising co
storage -ata maxtor 2f040l0, tsstcorp cd/dvdw sh-s182d,cd rom strongrising co vendor produt strongrising co revision 2.31 scsi controller scsi3
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=21f5 ProdID=1000 Rev= 0.00
S: Manufacturer=Qualcomm, Incorporated
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
usb 4-2:usb disconnect,address 2
:new full speed usb device using uhci_hcd and address 3
:configuration #1 chosen from 1 choice
scsi4: scsi emulation for usb mass storage devices
usb-storage:device found at 3
usb-storage:waiting for device to settle before scanning
scsi4:0:0:0: cd-rom strongrising.co 2.31 pq: 0 ansi:2
sr1: scsi-1 drive
sr 4:0:0:0 Attached scsi cd-rom sr1
usb-storage:device scan complete
sr1:Hmm,seems the drive doesn't support multisession cd's
usb 4-2:reset full speed usb device using uhci_hcd and address 3
usbserial:`'invalid for parameter`vendor'
what i am going to edit usb_modeswitch.conf but dont understand well.
Here are log files of usbview from microsoft and usbsnoop sniff usb in same name .
I have device reference txt file which could be wrong so please correct .
three usbsnoop.log are created by usbsniff 2.0 tool in 15 minutes and i copied them name them 1,2,3 and in usbsnoop dir now.
I have puppy 4.3.1.sfs but no kernel source no make no gcc.
my request is for following package.
1) udev pet package
About strong rising modem -it has 2 ic chips inside .one near usb socket port is samsung and in center is qualcomm msm6500
samsung chip 816 ,k5D5657ACB-D090, AQB958FA
qualcomm chip MsM 6500 , cp 90-v3195-8 ,H21098.1 ,p16643.00,43TZDH-0003,D643 A
In windows it installs modem driver in first found, i can see drivers inside and copy to d: drive,later on I cant see internal files but they are qualcomm i already copied. later each time chinatelcom connection interface will come it has 3 options 1) china TELCOM HIGH SPEED WIFI 2)china TELCOM EVDO 3)china TELCOM CDMA. in my account option call #777 user name :account name ,password :password In windows if i change dns server in tcp ip ,speed in network setting it set to dfault setting each time it runs,connects diffrerent ips in china with tcp and udp, it has its own nameserver connection with 184.108.40.206 seen from comodo firewall, network miner, dnsspeeder, tcp view.in process list seen from procexplorer c+wdetect.exe which detects at xp startup, c+wlink.exe which dials links connects does every frontend.
modemuser.inf in windows
modem.inf in windows.