Author Message

<  Setup Discussion  ~  Huawei E153 not working on CentOS 5.3

PostPosted: Fri Nov 26, 2010 9:33 pm
Posts: 2Joined: Fri Nov 26, 2010 9:15 pm
Hi All, I've been trying to make my Huawei E153 modem work with my CentOS 5.3 but i have no luck. Is there anyone here make this work?

I'am loading this confi file, it says successful but stil my modem is in storage mode..

########################################################
# Huawei, newer modems

DefaultVendor= 0x12d1
DefaultProduct=0x14ac

TargetVendor= 0x12d1
TargetProductList="1001,1406,140b,140c,1412,141b,14ac"

CheckSuccess=20

MessageContent="55534243123456780000000000000011060000000000000000000000000000"


Any help would be very much appreciated..


Offline Profile
PostPosted: Fri Nov 26, 2010 10:15 pm
Site AdminPosts: 4536Joined: Sat Nov 03, 2007 12:30 am
"14ac" is a target ID. Are you sure you are not in modem mode already?
The storage device may come back after switching, on top of the serial ports.

Check with "lsusb -d 12d1:14ac".


Offline Profile
PostPosted: Tue Nov 30, 2010 5:01 pm
Posts: 2Joined: Fri Nov 26, 2010 9:15 pm
thanks for ur response..

i checked with: lsusb -d 12d1:14ac, the result is:

Bus 002 Device 004: ID 12d1:14ac Huawei Tehnologies Co., Ltd.


Still, my modem is not detected and is in storage mode. If i check with: ls /dev/ttyUSB* it returns no result.


Offline Profile
PostPosted: Tue Nov 30, 2010 11:27 pm
Site AdminPosts: 4536Joined: Sat Nov 03, 2007 12:30 am
Maybe you can try version 1.1.5; it will try to load "usbserial" if the "option" module does not accept new IDS on the fly. I assume your kernel is a bit dated, is that right?


Offline Profile

Display posts from previous:  Sort by:

All times are UTC + 1 hour [ DST ]
Page 1 of 1
4 posts
Users browsing this forum: No registered users and 5 guests
Search for:
Post new topic  Reply to topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum