HUAWEI E1750 E156 and EC122 ZTE AC582 and AC2746
Posted: 22 Aug 2011, 05:43
please help me,this problem makes me so confused
it seems that the mode switch succeeded,but no driver detach.........only E1750 can detach the driver ttyUSB0 ttyUSB1 ttyUSB2,the others can not, so strange.....
this is the print out:
E1750
[root@Industech /etc]# usb_modeswitch -W -c /etc/12d1\:1446
Reading config file: /etc/12d1:1446
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.1.9 (C) Josua Dietze 2011
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x12d1
DefaultProduct= 0x1446
TargetVendor= 0x12d1
TargetProduct= not set
TargetClass= not set
TargetProductList="1001,1406,140b,140c,1412,141b,1433,14ac,1506"
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent="55534243123456780000000000000011062000000100000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
Interface=0x00
InquireDevice enabled (default)
Success check enabled, max. wait time 20 seconds
System integration mode disabled
usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 002 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
Looking for target devices ...
searching devices, found USB ID 12d1:1446
found matching vendor ID
searching devices, found USB ID 0000:0000
No devices in target mode or class found
Looking for default devices ...
searching devices, found USB ID 12d1:1446
found matching vendor ID
found matching product ID
adding device
searching devices, found USB ID 0000:0000
Found devices in default mode, class or configuration (1)
Accessing device 002 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using endpoints 0x01 (out) and 0x81 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
SCSI inquiry data (for identification)
-------------------------
Vendor String: HUAWEI
Model String: Mass Storage
Revision String: 2.31
-------------------------
USB description data (for identification)
usb 1-1: usbfs: process 870 (usb_modeswitch) did not claim interface 0 before us
e
-------------------------
Manufacturer: HUAWEI Technology
Product: HUAWEI Mobile
Serial No.: not provided
-------------------------
Setting up communication with interface 0
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, messusb 1-1: USB disconnect, address 2
age successfully sent
Resetting response endpoint 0x81
USB error: could not clear/halt ep 129: Timer expired
Could not reset endpoint (probably harmless): -62
Resetting message endpoint 0x01
USB error: could not clear/halt ep 1: Timer expired
Could not reset endpoint (probably harmless): -62
USB error: could not release intf 0: No such device
Device is gone, skipping any further commands
Checking for mode switch (max. 20 times, once per second) ...
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb 1-1: new full speed USB device using s3c2410-ohci and address 3
usb 1-1: configuration #1 chosen from 1 choice
option 1-1:1.0: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
option 1-1:1.1: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
option 1-1:1.2: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
scsi2 : SCSI emulation for USB Mass Storage devices
scsi3 : SCSI emulation for USB Mass Storage devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 003 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
searching devices, found USB ID 12d1:1001
found matching vendor ID
found matching product ID from list
searching devices, found USB ID 0000:0000
Found target device, now opening
Found target device 003 on bus 001
Target device description data
-------------------------
Manufacturer: HUAWEI Technology
Product: HUAWEI Mobile
Serial No.: not provided
-------------------------
Found correct target device
Mode switch succeeded. Bye.
[root@Industech /etc]# scsi 2:0:0:0: CD-ROM HUAWEI Mass Storage
2.31 PQ: 0 ANSI: 2
scsi 2:0:0:0: Attached scsi generic sg0 type 5
scsi 3:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
sd 3:0:0:0: Attached scsi removable disk sda
sd 3:0:0:0: Attached scsi generic sg1 type 0
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1001 Rev= 0.00
S: Manufacturer=HUAWEI Technology
S: Product=HUAWEI Mobile
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=5ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
ZTE AC582
[root@Industech /etc]# usb_modeswitch -W -c /etc/19d2:0026
Reading config file: /etc/19d2:0026
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.1.9 (C) Josua Dietze 2011
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x19d2
DefaultProduct= 0x0026
TargetVendor= 0x19d2
TargetProduct= 0x0094
TargetClass= not set
TargetProductList=""
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent="5553424312345678240000008000061b000000020000000000000000000000"
NeedResponse=1
ResponseEndpoint= not set
Interface=0x00
InquireDevice enabled (default)
Success check enabled, max. wait time 20 seconds
System integration mode disabled
usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 005 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
Looking for target devices ...
searching devices, found USB ID 19d2:0026
found matching vendor ID
searching devices, found USB ID 0000:0000
No devices in target mode or class found
Looking for default devices ...
searching devices, found USB ID 19d2:0026
found matching vendor ID
found matching product ID
adding device
searching devices, found USB ID 0000:0000
Found devices in default mode, class or configuration (1)
Accessing device 005 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using endpoints 0x09 (out) and 0x89 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
SCSI inquiry data (for identification)
-------------------------
Vendor String: ZTE Corp
Model String: USB Storage
Revision String: 2.31
-------------------------
USB description data (for identification)
usb 1-1: usbfs: process 989 (usb_modeswitch) did not claim interface 0 before us
e
-------------------------
Manufacturer: Qualcomm, Incorporated
Product: USB ZTE Storage
Serial No.: AC580_CT_C010001
-------------------------
Setting up communication with interface 0
Using endpoint 0x09 for message sending ...
Trying to send message 1 to endpoint 0x09 ...
OK, message successfully sent
Reading the response to message 1 (CSW) ...
OK, response successfully read (0 bytes).
Resetting response endpoint 0x89
USB error: could not clear/halt ep 137: Timer expired
Could not reset endpoint (probably harmless): -62
Resetting message endpoint 0x09
USB error: could not clear/halt ep 9: Timer expired
Could not reset endpoint (probably harmless): -62
usb 1-1: USB disconnect, address 5
USB error: could not release intf 0: No such device
Device is gone, skipping any further commands
Checking for mode switch (max. 20 times, once per second) ...
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb 1-1: new full speed USB device using s3c2410-ohci and address 6
usb 1-1: device descriptor read/64, error -62
usb 1-1: device descriptor read/64, error -62
usb 1-1: new full speed USB device using s3c2410-ohci and address 7
usb 1-1: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
scsi6 : SCSI emulation for USB Mass Storage devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 007 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
searching devices, found USB ID 19d2:0094
found matching vendor ID
found matching product ID
adding device
searching devices, found USB ID 0000:0000
Found target device, now opening
Found target device 007 on bus 001
Target device description data
-------------------------
Manufacturer: ZTE, Incorporated
Product: ZTE EVDO Technologies MSM
Serial No.: not provided
-------------------------
Found correct target device
Mode switch succeeded. Bye.
[root@Industech /etc]# scsi 5:0:0:0: CD-ROM ZTE Corp USB Storage
2.31 PQ: 0 ANSI: 2
scsi 5:0:0:0: Attached scsi generic sg0 type 5
scsi 6:0:0:0: Direct-Access ZTE Corp USB Storage 2.31 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi removable disk sda
sd 6:0:0:0: Attached scsi generic sg1 type 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=0094 Rev= 0.00
S: Manufacturer=ZTE, Incorporated
S: Product=ZTE EVDO Technologies MSM
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=88(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=89(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=09(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=8a(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=0b(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
HUAWEI E156
[root@Industech /etc]# usb_modeswitch -W -c 12d1:1505
Reading config file: 12d1:1505
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.1.9 (C) Josua Dietze 2011
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x12d1
DefaultProduct= 0x1505
TargetVendor= 0x12d1
TargetProduct= 0x140c
TargetClass= not set
TargetProductList=""
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent="55534243123456780000000000000011062000000100000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
Interface=0x00
InquireDevice enabled (default)
Success check enabled, max. wait time 5 seconds
System integration mode disabled
usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 002 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
Looking for target devices ...
searching devices, found USB ID 12d1:1505
found matching vendor ID
searching devices, found USB ID 0000:0000
No devices in target mode or class found
Looking for default devices ...
searching devices, found USB ID 12d1:1505
found matching vendor ID
found matching product ID
adding device
searching devices, found USB ID 0000:0000
Found devices in default mode, class or configuration (1)
Accessing device 002 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using endpoints 0x08 (out) and 0x87 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
SCSI inquiry data (for identification)
-------------------------
Vendor String: HUAWEI
Model String: Mass Storage
Revision String: 2.31
-------------------------
USB description data (for identification)
usb 1-1: usbfs: process 858 (usb_modeswitch) did not claim interface 0 before us
e
-------------------------
Manufacturer: HUAWEI TECHNOLOGIES
Product: HUAWEI Mobile
Serial No.:
-------------------------
Setting up communication with interface 0
Using endpoint 0x08 for message sending ...
Trying to send message 1 to endpoint 0x08 ...
OK, message successfully sent
Resetting response endpoint 0x87
USB error: could not clear/halt ep 135: Timer expired
Could not reset endpoint (probably harmless): -62
Resetting message endpoint 0x08
USB error: could not clear/halt ep 8: Timer expired
Could not reset endpoint (probably harmless): -62
usb 1-1: USB disconnect, address 2
USB error: could not release intf 0: No such device
Device is gone, skipping any further commands
Checking for mode switch (max. 5 times, once per second) ...
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb 1-1: new full speed USB device using s3c2410-ohci and address 3
usb 1-1: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 003 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
searching devices, found USB ID 12d1:140c
found matching vendor ID
found matching product ID
adding device
searching devices, found USB ID 0000:0000
Found target device, now opening
Found target device 003 on bus 001
Target device description data
-------------------------
Manufacturer: HUAWEI TECHNOLOGIES
Product: HUAWEI Mobile
Serial No.:
-------------------------
Found correct target device
Mode switch succeeded. Bye.
[root@Industech /etc]# scsi 1:0:0:0: CD-ROM HUAWEI Mass Storage
2.31 PQ: 0 ANSI: 0
scsi 1:0:0:0: Attached scsi generic sg0 type 5
[root@Industech /etc]# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.21.5-cfs-v19 ohci_hcd
S: Product=S3C24XX OHCI
S: SerialNumber=s3c24xx
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=140c Rev= 0.00
S: Manufacturer=HUA WEI TECHNOLOGIES
S: Product=HUAWEI Mobile
S: SerialNumber=
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=85(I) Atr=03(Int.) MxPS= 16 Ivl=8ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
[root@Industech /etc]#
HUAWEI EC122
[root@Industech /etc]# usb_modeswitch -W -c /etc/12d1\:1505
Reading config file: /etc/12d1:1505
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.1.9 (C) Josua Dietze 2011
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x12d1
DefaultProduct= 0x1505
TargetVendor= 0x12d1
TargetProduct= 0x140c
TargetClass= not set
TargetProductList=""
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent="55534243123456780000000000000011062000000100000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
Interface=0x00
InquireDevice enabled (default)
Success check enabled, max. wait time 5 seconds
System integration mode disabled
usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 004 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
Looking for target devices ...
searching devices, found USB ID 12d1:1505
found matching vendor ID
searching devices, found USB ID 0000:0000
No devices in target mode or class found
Looking for default devices ...
searching devices, found USB ID 12d1:1505
found matching vendor ID
found matching product ID
adding device
searching devices, found USB ID 0000:0000
Found devices in default mode, class or configuration (1)
Accessing device 004 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using endpoints 0x08 (out) and 0x87 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
SCSI inquiry data (for identification)
-------------------------
Vendor String: HUAWEI
Model String: Mass Storage
Revision String: 2.31
-------------------------
USB description data (for identification)
usb 1-1: usbfs: process 942 (usb_modeswitch) did not claim interface 0 before us
e
-------------------------
Manufacturer: HUAWEI TECHNOLOGIES
Product: HUAWEI Mobile
Serial No.:
-------------------------
Setting up communication with interface 0
Using endpoint 0x08 for message sending ...
Trying to send message 1 to endpoint 0x08 ...
OK, message successfully sent
Resetting response endpoint 0x87
USB error: could not clear/halt ep 135: Timer expired
Could not reset endpoint (probably harmless): -62
Resetting message endpoint 0x08
USB error: could not clear/halt ep 8: Timer expired
Could not reset endpoint (probably harmless): -62
Checking for mode switch (max. 5 times, once per second) ...
usb 1-1: USB disconnect, address 4
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb 1-1: new full speed USB device using s3c2410-ohci and address 5
usb 1-1: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 005 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
searching devices, found USB ID 12d1:140c
found matching vendor ID
found matching product ID
adding device
searching devices, found USB ID 0000:0000
Found target device, now opening
Found target device 005 on bus 001
Target device description data
-------------------------
Manufacturer: HUAWEI TECHNOLOGIES
Product: HUAWEI Mobile
Serial No.:
-------------------------
Found correct target device
Mode switch succeeded. Bye.
[root@Industech /etc]# scsi 3:0:0:0: CD-ROM HUAWEI Mass Storage
2.31 PQ: 0 ANSI: 0
scsi 3:0:0:0: Attached scsi generic sg0 type 5
[root@Industech /etc]# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.21.5-cfs-v19 ohci_hcd
S: Product=S3C24XX OHCI
S: SerialNumber=s3c24xx
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=140c Rev= 0.00
S: Manufacturer=HUA WEI TECHNOLOGIES
S: Product=HUAWEI Mobile
S: SerialNumber=
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=85(I) Atr=03(Int.) MxPS= 16 Ivl=8ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
[root@Industech /etc]
it seems that the mode switch succeeded,but no driver detach.........only E1750 can detach the driver ttyUSB0 ttyUSB1 ttyUSB2,the others can not, so strange.....
this is the print out:
E1750
[root@Industech /etc]# usb_modeswitch -W -c /etc/12d1\:1446
Reading config file: /etc/12d1:1446
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.1.9 (C) Josua Dietze 2011
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x12d1
DefaultProduct= 0x1446
TargetVendor= 0x12d1
TargetProduct= not set
TargetClass= not set
TargetProductList="1001,1406,140b,140c,1412,141b,1433,14ac,1506"
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent="55534243123456780000000000000011062000000100000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
Interface=0x00
InquireDevice enabled (default)
Success check enabled, max. wait time 20 seconds
System integration mode disabled
usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 002 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
Looking for target devices ...
searching devices, found USB ID 12d1:1446
found matching vendor ID
searching devices, found USB ID 0000:0000
No devices in target mode or class found
Looking for default devices ...
searching devices, found USB ID 12d1:1446
found matching vendor ID
found matching product ID
adding device
searching devices, found USB ID 0000:0000
Found devices in default mode, class or configuration (1)
Accessing device 002 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using endpoints 0x01 (out) and 0x81 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
SCSI inquiry data (for identification)
-------------------------
Vendor String: HUAWEI
Model String: Mass Storage
Revision String: 2.31
-------------------------
USB description data (for identification)
usb 1-1: usbfs: process 870 (usb_modeswitch) did not claim interface 0 before us
e
-------------------------
Manufacturer: HUAWEI Technology
Product: HUAWEI Mobile
Serial No.: not provided
-------------------------
Setting up communication with interface 0
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, messusb 1-1: USB disconnect, address 2
age successfully sent
Resetting response endpoint 0x81
USB error: could not clear/halt ep 129: Timer expired
Could not reset endpoint (probably harmless): -62
Resetting message endpoint 0x01
USB error: could not clear/halt ep 1: Timer expired
Could not reset endpoint (probably harmless): -62
USB error: could not release intf 0: No such device
Device is gone, skipping any further commands
Checking for mode switch (max. 20 times, once per second) ...
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb 1-1: new full speed USB device using s3c2410-ohci and address 3
usb 1-1: configuration #1 chosen from 1 choice
option 1-1:1.0: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
option 1-1:1.1: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
option 1-1:1.2: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
scsi2 : SCSI emulation for USB Mass Storage devices
scsi3 : SCSI emulation for USB Mass Storage devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 003 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
searching devices, found USB ID 12d1:1001
found matching vendor ID
found matching product ID from list
searching devices, found USB ID 0000:0000
Found target device, now opening
Found target device 003 on bus 001
Target device description data
-------------------------
Manufacturer: HUAWEI Technology
Product: HUAWEI Mobile
Serial No.: not provided
-------------------------
Found correct target device
Mode switch succeeded. Bye.
[root@Industech /etc]# scsi 2:0:0:0: CD-ROM HUAWEI Mass Storage
2.31 PQ: 0 ANSI: 2
scsi 2:0:0:0: Attached scsi generic sg0 type 5
scsi 3:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
sd 3:0:0:0: Attached scsi removable disk sda
sd 3:0:0:0: Attached scsi generic sg1 type 0
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1001 Rev= 0.00
S: Manufacturer=HUAWEI Technology
S: Product=HUAWEI Mobile
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=5ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
ZTE AC582
[root@Industech /etc]# usb_modeswitch -W -c /etc/19d2:0026
Reading config file: /etc/19d2:0026
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.1.9 (C) Josua Dietze 2011
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x19d2
DefaultProduct= 0x0026
TargetVendor= 0x19d2
TargetProduct= 0x0094
TargetClass= not set
TargetProductList=""
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent="5553424312345678240000008000061b000000020000000000000000000000"
NeedResponse=1
ResponseEndpoint= not set
Interface=0x00
InquireDevice enabled (default)
Success check enabled, max. wait time 20 seconds
System integration mode disabled
usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 005 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
Looking for target devices ...
searching devices, found USB ID 19d2:0026
found matching vendor ID
searching devices, found USB ID 0000:0000
No devices in target mode or class found
Looking for default devices ...
searching devices, found USB ID 19d2:0026
found matching vendor ID
found matching product ID
adding device
searching devices, found USB ID 0000:0000
Found devices in default mode, class or configuration (1)
Accessing device 005 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using endpoints 0x09 (out) and 0x89 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
SCSI inquiry data (for identification)
-------------------------
Vendor String: ZTE Corp
Model String: USB Storage
Revision String: 2.31
-------------------------
USB description data (for identification)
usb 1-1: usbfs: process 989 (usb_modeswitch) did not claim interface 0 before us
e
-------------------------
Manufacturer: Qualcomm, Incorporated
Product: USB ZTE Storage
Serial No.: AC580_CT_C010001
-------------------------
Setting up communication with interface 0
Using endpoint 0x09 for message sending ...
Trying to send message 1 to endpoint 0x09 ...
OK, message successfully sent
Reading the response to message 1 (CSW) ...
OK, response successfully read (0 bytes).
Resetting response endpoint 0x89
USB error: could not clear/halt ep 137: Timer expired
Could not reset endpoint (probably harmless): -62
Resetting message endpoint 0x09
USB error: could not clear/halt ep 9: Timer expired
Could not reset endpoint (probably harmless): -62
usb 1-1: USB disconnect, address 5
USB error: could not release intf 0: No such device
Device is gone, skipping any further commands
Checking for mode switch (max. 20 times, once per second) ...
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb 1-1: new full speed USB device using s3c2410-ohci and address 6
usb 1-1: device descriptor read/64, error -62
usb 1-1: device descriptor read/64, error -62
usb 1-1: new full speed USB device using s3c2410-ohci and address 7
usb 1-1: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
scsi6 : SCSI emulation for USB Mass Storage devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 007 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
searching devices, found USB ID 19d2:0094
found matching vendor ID
found matching product ID
adding device
searching devices, found USB ID 0000:0000
Found target device, now opening
Found target device 007 on bus 001
Target device description data
-------------------------
Manufacturer: ZTE, Incorporated
Product: ZTE EVDO Technologies MSM
Serial No.: not provided
-------------------------
Found correct target device
Mode switch succeeded. Bye.
[root@Industech /etc]# scsi 5:0:0:0: CD-ROM ZTE Corp USB Storage
2.31 PQ: 0 ANSI: 2
scsi 5:0:0:0: Attached scsi generic sg0 type 5
scsi 6:0:0:0: Direct-Access ZTE Corp USB Storage 2.31 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi removable disk sda
sd 6:0:0:0: Attached scsi generic sg1 type 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=0094 Rev= 0.00
S: Manufacturer=ZTE, Incorporated
S: Product=ZTE EVDO Technologies MSM
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=88(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=89(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=09(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=8a(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=0b(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
HUAWEI E156
[root@Industech /etc]# usb_modeswitch -W -c 12d1:1505
Reading config file: 12d1:1505
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.1.9 (C) Josua Dietze 2011
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x12d1
DefaultProduct= 0x1505
TargetVendor= 0x12d1
TargetProduct= 0x140c
TargetClass= not set
TargetProductList=""
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent="55534243123456780000000000000011062000000100000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
Interface=0x00
InquireDevice enabled (default)
Success check enabled, max. wait time 5 seconds
System integration mode disabled
usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 002 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
Looking for target devices ...
searching devices, found USB ID 12d1:1505
found matching vendor ID
searching devices, found USB ID 0000:0000
No devices in target mode or class found
Looking for default devices ...
searching devices, found USB ID 12d1:1505
found matching vendor ID
found matching product ID
adding device
searching devices, found USB ID 0000:0000
Found devices in default mode, class or configuration (1)
Accessing device 002 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using endpoints 0x08 (out) and 0x87 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
SCSI inquiry data (for identification)
-------------------------
Vendor String: HUAWEI
Model String: Mass Storage
Revision String: 2.31
-------------------------
USB description data (for identification)
usb 1-1: usbfs: process 858 (usb_modeswitch) did not claim interface 0 before us
e
-------------------------
Manufacturer: HUAWEI TECHNOLOGIES
Product: HUAWEI Mobile
Serial No.:
-------------------------
Setting up communication with interface 0
Using endpoint 0x08 for message sending ...
Trying to send message 1 to endpoint 0x08 ...
OK, message successfully sent
Resetting response endpoint 0x87
USB error: could not clear/halt ep 135: Timer expired
Could not reset endpoint (probably harmless): -62
Resetting message endpoint 0x08
USB error: could not clear/halt ep 8: Timer expired
Could not reset endpoint (probably harmless): -62
usb 1-1: USB disconnect, address 2
USB error: could not release intf 0: No such device
Device is gone, skipping any further commands
Checking for mode switch (max. 5 times, once per second) ...
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb 1-1: new full speed USB device using s3c2410-ohci and address 3
usb 1-1: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 003 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
searching devices, found USB ID 12d1:140c
found matching vendor ID
found matching product ID
adding device
searching devices, found USB ID 0000:0000
Found target device, now opening
Found target device 003 on bus 001
Target device description data
-------------------------
Manufacturer: HUAWEI TECHNOLOGIES
Product: HUAWEI Mobile
Serial No.:
-------------------------
Found correct target device
Mode switch succeeded. Bye.
[root@Industech /etc]# scsi 1:0:0:0: CD-ROM HUAWEI Mass Storage
2.31 PQ: 0 ANSI: 0
scsi 1:0:0:0: Attached scsi generic sg0 type 5
[root@Industech /etc]# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.21.5-cfs-v19 ohci_hcd
S: Product=S3C24XX OHCI
S: SerialNumber=s3c24xx
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=140c Rev= 0.00
S: Manufacturer=HUA WEI TECHNOLOGIES
S: Product=HUAWEI Mobile
S: SerialNumber=
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=85(I) Atr=03(Int.) MxPS= 16 Ivl=8ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
[root@Industech /etc]#
HUAWEI EC122
[root@Industech /etc]# usb_modeswitch -W -c /etc/12d1\:1505
Reading config file: /etc/12d1:1505
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.1.9 (C) Josua Dietze 2011
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x12d1
DefaultProduct= 0x1505
TargetVendor= 0x12d1
TargetProduct= 0x140c
TargetClass= not set
TargetProductList=""
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent="55534243123456780000000000000011062000000100000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
Interface=0x00
InquireDevice enabled (default)
Success check enabled, max. wait time 5 seconds
System integration mode disabled
usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 004 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
Looking for target devices ...
searching devices, found USB ID 12d1:1505
found matching vendor ID
searching devices, found USB ID 0000:0000
No devices in target mode or class found
Looking for default devices ...
searching devices, found USB ID 12d1:1505
found matching vendor ID
found matching product ID
adding device
searching devices, found USB ID 0000:0000
Found devices in default mode, class or configuration (1)
Accessing device 004 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using endpoints 0x08 (out) and 0x87 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
SCSI inquiry data (for identification)
-------------------------
Vendor String: HUAWEI
Model String: Mass Storage
Revision String: 2.31
-------------------------
USB description data (for identification)
usb 1-1: usbfs: process 942 (usb_modeswitch) did not claim interface 0 before us
e
-------------------------
Manufacturer: HUAWEI TECHNOLOGIES
Product: HUAWEI Mobile
Serial No.:
-------------------------
Setting up communication with interface 0
Using endpoint 0x08 for message sending ...
Trying to send message 1 to endpoint 0x08 ...
OK, message successfully sent
Resetting response endpoint 0x87
USB error: could not clear/halt ep 135: Timer expired
Could not reset endpoint (probably harmless): -62
Resetting message endpoint 0x08
USB error: could not clear/halt ep 8: Timer expired
Could not reset endpoint (probably harmless): -62
Checking for mode switch (max. 5 times, once per second) ...
usb 1-1: USB disconnect, address 4
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb 1-1: new full speed USB device using s3c2410-ohci and address 5
usb 1-1: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb_os_find_devices: Found 001 on 001
searching devices, found USB ID 0000:0000
Searching for target devices ...
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 005 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
searching devices, found USB ID 12d1:140c
found matching vendor ID
found matching product ID
adding device
searching devices, found USB ID 0000:0000
Found target device, now opening
Found target device 005 on bus 001
Target device description data
-------------------------
Manufacturer: HUAWEI TECHNOLOGIES
Product: HUAWEI Mobile
Serial No.:
-------------------------
Found correct target device
Mode switch succeeded. Bye.
[root@Industech /etc]# scsi 3:0:0:0: CD-ROM HUAWEI Mass Storage
2.31 PQ: 0 ANSI: 0
scsi 3:0:0:0: Attached scsi generic sg0 type 5
[root@Industech /etc]# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.21.5-cfs-v19 ohci_hcd
S: Product=S3C24XX OHCI
S: SerialNumber=s3c24xx
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=140c Rev= 0.00
S: Manufacturer=HUA WEI TECHNOLOGIES
S: Product=HUAWEI Mobile
S: SerialNumber=
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=85(I) Atr=03(Int.) MxPS= 16 Ivl=8ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
[root@Industech /etc]