USB_modeswitch only switches one modem at boot
Posted: 24 Apr 2012, 09:18
Hello,
I am running Debian Wheezy (on top of the 3.2.0 kernel) and have two Huawei E173 modems that I would like to connect automatically to their separate ISPs on boot. However, only one of the modems is switched (from 1446 to 1436) at boot. If the non-switched modem out and back in, it works perfectly. After going through my kernel logs, I can see that usb_modeswitch is triggered only for one of the modems. This seems to be fairly consistent, however, it happens less often if I do a soft-boot (i.e., run the reboot command).
Is there any way to make usb_modeswitch switch both my modems on boot, or any tips on how I can proceed debugging this?
Thanks in advance!
Kristian
I am running Debian Wheezy (on top of the 3.2.0 kernel) and have two Huawei E173 modems that I would like to connect automatically to their separate ISPs on boot. However, only one of the modems is switched (from 1446 to 1436) at boot. If the non-switched modem out and back in, it works perfectly. After going through my kernel logs, I can see that usb_modeswitch is triggered only for one of the modems. This seems to be fairly consistent, however, it happens less often if I do a soft-boot (i.e., run the reboot command).
Is there any way to make usb_modeswitch switch both my modems on boot, or any tips on how I can proceed debugging this?
Thanks in advance!
Kristian