Josh
usb_modeswitch AT^U2DIAG=0
recognizes,,,switch does

if there is a path /sys/bus/usb-serial/drivers/option1 ok
get commands,,,,,
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system ,,,,,,OK
mount -t usbfs usbfs /proc/bus/usb,,,,, No such filr or directory ????
i have /proc/bus/input,,,,no /proc/bus/usb

Josh
Then I can do.
I do not understand this message.
What to do exactly

Bueno a ver si aparece firmware con android 3
Gracias por tu tiempo

You can connect with wvdial on android.
unlock modem. AT^U2DIAG=0
It mounts on dev/ttyUSB0

Sorri
my job is
zt-180 android 2.2 a static binary for ARM: usb_modeswitch-1.1.7-arm-static.bz2

usb_modeswitch.config
########################################################
# Huawei K3765
DefaultVendor= 0x12d1
DefaultProduct=0x1520
TargetVendor= 0x12d1
TargetProduct= 0x1465
CheckSuccess=20
MessageContent="55534243123456780000000000000011062000000100000000000000000000"

# usb_modeswitch -I -W -c usb_modeswitch.conf Reading config file: usb_modeswitch.conf * usb_modeswitch: handle USB devices with multiple modes * Version 1.1.6 (C) Josua Dietze 2010 * Based on libusb0 (0.1.12 and above) ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x152...

# usb_modeswitch -I -W -c usb_modeswitch.conf error obtaining child information: Inappropriate ioctl for device USB error: could not clear/halt ep 129: Protocol error Error resetting endpoint: -71 Resetting message endpoint 0x01 USB error: could not clear/halt ep 1: No such device Error resetting en...