Could you share screenshots of the different pages in the web interface? Do you have a blog or some web server where you can share them?

Does the web interface on this device let you put it in bridging mode, so the Linux or OpenWRT device can have the public IP instead of a 192.168.1.x address?

Can anyone confirm:

a) can this device be run as a serial device (e.g. using the insmod command above)?

b) if in the cdc_ether mode, does the web interface let you turn off DHCP and use bridging or some other solution to put the public IP onto the OpenWRT router?

Ok, further observations, my OpenWRT didn't actually have the usbserial module package installed at all However, there was no error output from the insmod command, so I had no idea that usbserial was missing I've install kmod-usb-serial and kmod-usb-serial-wwan, I find that I can load usbserial with...

Not working for me The first stage, usb_modeswitch, appears to succeed, the new device 2357:0201 appears after about 5 seconds However, there are no /dev/ttyUSB* devices and /proc/bus/usb/devices doesn't appear to show any comm class devices I am using OpenWRT attitude adjustment on the TL-WR1043ND ...