Search found 6575 matches
- 21 Nov 2019, 09:07
- Forum: Device Information
- Topic: 1&1 XSstick W1208 (4g systems)
- Replies: 15
- Views: 35389
Re: 1&1 XSstick W1208 (4g systems)
I'm on it just now. Going slowly due to many other obligations but will be released in November.
- 11 Nov 2019, 18:35
- Forum: Device Information
- Topic: Huawei E3531 with PI Zero W - USB Mass storage [SOLVED]
- Replies: 8
- Views: 26357
Re: Huawei E3531 with PI Zero W - USB Mass storage [SOLVED]
Same advice applies - don't use /etc/usb_modeswitch.conf for device configurations !! You likely have overwritten the original global configuration file with that name. Delete it, uninstall usb_modeswitch and re-install it. Then have a look at /etc/usb_modeswitch.conf again. If it exists, edit it an...
- 10 Nov 2019, 16:00
- Forum: Device Information
- Topic: Usb_modeswitch-switch and CD, SD disable at one time !
- Replies: 3
- Views: 10313
Re: Usb_modeswitch-switch and CD, SD disable at one time !
The "Reset" command is just passed through to "libusb". I didn't research much if it actually does anything. If there is no symlink created then there is probably no serial port available. What's the output of "lsusb -v -d 12d1:1505" (with the modem connected and switch...
- 10 Nov 2019, 15:44
- Forum: Device Information
- Topic: huawei e8372h-153 switching but not recognized as modem
- Replies: 13
- Views: 19299
Re: huawei e8372h-153 switching but not recognized as modem
The Huawei modems E3272 and E3372 do not provide a PPP port anymore in the alternative mode, only a serial DIAG port and an NCM interface (optimized Ethernet flavour).
It's likely that newer ones follow that path.
It's likely that newer ones follow that path.
- 10 Nov 2019, 15:39
- Forum: Device Information
- Topic: zte k3565z on Lubuntu 16.04.6
- Replies: 31
- Views: 44081
Re: zte k3565z on Lubuntu 16.04.6
Without "StandardEject=1", the mode switch will likely not happen. Add it if it's missing.
You can simply copy the content of the Lenovo config into a file named "19d2:2000" in the folder "/etc/usb_modeswitch.d". That should do.
You can simply copy the content of the Lenovo config into a file named "19d2:2000" in the folder "/etc/usb_modeswitch.d". That should do.
- 10 Nov 2019, 15:32
- Forum: Setup Discussion
- Topic: Ubuntu only allows 1 active modem
- Replies: 1
- Views: 9920
Re: Ubuntu only allows 1 active modem
The identical MAC address is likely the problem for the system. Try changing it for one modem. A quick search brought up this: https://forum.openwrt.org/t/huawei-4g-dongle-duplicate-mac-addresses/41214/6 It may also be a problem of Ubuntu not being able to combine the ports. I'm not familiar with it...
- 10 Nov 2019, 15:26
- Forum: Setup Discussion
- Topic: Trying to setup HSDPA on Raspberry Pi
- Replies: 1
- Views: 9290
Re: Trying to setup HSDPA on Raspberry Pi
Please disable switching in /etc/usb_modeswitch.conf and re-plug the modem.
Then run in a terminal:
Copy and paste the complete output here (easier if you redirect it to a file first).
Make sure the formatting is kept by enclosing the whole output in a
Then run in a terminal:
Code: Select all
lsusb -v -d 05c6:1000
Make sure the formatting is kept by enclosing the whole output in a
Code: Select all
tag.
- 10 Nov 2019, 15:13
- Forum: Setup Discussion
- Topic: E3531 with RPI Zero W and getting the signal strength
- Replies: 6
- Views: 14394
Re: E3531 with RPI Zero W and getting the signal strength
In that mode, there is no serial port available.
You can try the alternative Huawei mode. It's easiest if you edit /etc/usb_modeswitch.conf and add the line:
You can try the alternative Huawei mode. It's easiest if you edit /etc/usb_modeswitch.conf and add the line:
Code: Select all
HuaweiAltModeGlobal=1
- 10 Nov 2019, 13:09
- Forum: Everything Coding
- Topic: usb_modeswitch_dispatcher SIGABRT - usb_modeswitch 2.2.0
- Replies: 5
- Views: 13308
Re: usb_modeswitch_dispatcher SIGABRT - usb_modeswitch 2.2.0
I'm about to drop the inclusion of jimtcl altogether.
There should be a libjim on the respective distribution which can be maintained and kept current independently of usb_modeswitch.
There should be a libjim on the respective distribution which can be maintained and kept current independently of usb_modeswitch.
- 10 Nov 2019, 12:36
- Forum: Everything Coding
- Topic: dispatcher: jimtcl; corrupted heap
- Replies: 7
- Views: 17825
Re: dispatcher: jimtcl; corrupted heap
I see.
I have completed a solution where a bash script replaces the tcl script during build. So the dependency on tclsh is dropped.
Showing consideration for the distro packagers, I will not yet move to cmake though.
I have completed a solution where a bash script replaces the tcl script during build. So the dependency on tclsh is dropped.
Showing consideration for the distro packagers, I will not yet move to cmake though.
- 10 Nov 2019, 12:29
- Forum: Everything Coding
- Topic: Add support for Logitech G920 Racing Wheel
- Replies: 14
- Views: 35713
Re: Add support for Logitech G920 Racing Wheel
There are many sources. You should be able to use any newer release.
https://fr2.rpmfind.net/linux/rpm2html/ ... witch-data
https://fr2.rpmfind.net/linux/rpm2html/ ... witch-data
- 10 Nov 2019, 12:22
- Forum: New Ideas
- Topic: Usb_modeswitch, get imei/imsi, add it as symlinks to ttyUSB.
- Replies: 4
- Views: 13945
Re: Usb_modeswitch, get imei/imsi, add it as symlinks to ttyUSB.
The problem is that there is no common standard how the function of serial ports can be determined. We would end up treating each modem or manufacturer individually. That's really outside the scope of usb_modeswitch. You might want to look at Redhat's "modem-manager" which is part of "...
- 07 Nov 2019, 19:10
- Forum: The PPP Widget Family for Android
- Topic: Setup modem freeze | rk3368 HU | Android 9 | PX5
- Replies: 2
- Views: 10725
Re: Setup modem freeze | rk3368 HU | Android 9 | PX5
O.K., let's go through the list ... 1. Android 9 is yet untested with PPP Widget. I just bought my first device running that version but have not managed to root it yet. So this is work in progress ... 2. The modem setup does not need any SIM parameters. If a modem is discovered, the only thing that...
- 12 Oct 2019, 12:34
- Forum: Setup Discussion
- Topic: Exception for usb-modeswitch
- Replies: 4
- Views: 11135
Re: Exception for usb-modeswitch
I wonder if there's any kind of "exception" for usb-modeswitch so it doesn't turn my mobile to serial device. Thanks for help. There are several ways to do that. 1. The global approach - affects all USB modems etc.: Edit "/etc/usb_modeswitch.conf" and change DisableSwitching=0 t...
- 09 Oct 2019, 19:03
- Forum: The PPP Widget Family for Android
- Topic: ipv6 only upstream / modem
- Replies: 2
- Views: 10650
Re: ipv6 only upstream / modem
Hmm, that's a new one. At the moment, only IPv4 is handled in PPP Widget.
This will be a considerable load of work. I can't make promises at this time.
This will be a considerable load of work. I can't make promises at this time.