Search found 1343 matches

by LOM
16 Sep 2012, 16:01
Forum: Device Information
Topic: UE100 evdo modem
Replies: 10
Views: 8944

Re: UE100 evdo modem

15eb:1231 is not yet supported by usb_modeswitch as far as I can see.
by LOM
13 Sep 2012, 08:08
Forum: Device Information
Topic: Huawei E177
Replies: 5
Views: 5134

Re: Huawei E177

12d1:14d2 is a target id after modeswitching from 12d1:14ba (there may be other intitial id's giving the same target id) using the standard
Huawei message -M 55534243123456780000000000000011062000000100000000000000000000
by LOM
07 Sep 2012, 15:52
Forum: New Ideas
Topic: Switching MBIM devices
Replies: 24
Views: 34109

Re: Switching MBIM devices

Looking at the example, there are some attributes that differ from the known devices with the same ID. Of course there is the iProduct string containing "MBIM" but I don't know how reliable that is unless it's part of a 'standard agreement'. Then there is the fact that the device has two ...
by LOM
03 Sep 2012, 09:07
Forum: Setup Discussion
Topic: ZTE K3806-Z recognized as wired connection
Replies: 4
Views: 5964

cdc_ether, usbnet, and mii works together and creates an ethx devicce but if that mode is supported and how to connect is something you have to ask your provider about. cdc_acm does not use usbnet, cdc_acm is a stand alone driver which creates the /dev/ttyACMx serial modem devices. You are using a f...
by LOM
02 Sep 2012, 16:43
Forum: Setup Discussion
Topic: ZTE K3806-Z recognized as wired connection
Replies: 4
Views: 5964

ZTE K3806-z (19d2:1015 as modem id) is a stick with dual modes, it has both acm interfaces (driver cdc-acm) and ethernet interfaces (driver cdc-ether). Start with doing a cat /proc/bus/usb/devices, it will show all interfaces in the stick and the drivers being attached to the interfaces. If the cdc-...
by LOM
11 Jul 2012, 20:10
Forum: Device Information
Topic: Can't dial up using Huawei UMG1831
Replies: 24
Views: 20689

Also, I got a Sierra Wireless GL6100 modem here, I hooked it up to my system and am talking to it on /dev/ttyUSB0 but I seem to be getting a very similar issue with that one too The GL6100 is a modem with RS-232 interface so I suppose you have the USB version GL6110? It only works with the cdc_acm ...
by LOM
11 Jul 2012, 19:40
Forum: Device Information
Topic: Can't dial up using Huawei UMG1831
Replies: 24
Views: 20689

well no, that is not the problem. I got a bunch of links after running usb_modeswitch and /dev/ttyUSB2 seems to be the only one working (and it must be talking, otherwise the chat script would terminate much earlier). Talking doesn't necessarily mean that it is the serial modem interface.. Bus 002 ...
by LOM
11 Jul 2012, 15:20
Forum: Device Information
Topic: Can't dial up using Huawei UMG1831
Replies: 24
Views: 20689

Connect: ppp0 <--> /dev/ttyUSB2

Why has your dialer chosen ttyUSB2, do you have any other ttyUSB devices connected?
The modem interface of UMG1831 (12d1:1404) is interface 0 which in most cases would correspond to ttyUSB0