I have a modem D-Link DWM-221, and is not working.
Could you please say whether this modem is supported?
Thanks in advance
-
sergiogelli
- Posts: 11
- Joined: 24 Dec 2014, 12:18
Re: Modem D-Link DWM-221
Please. I really need help. The lost time with this problem is being too large.
Searching the internet, I found these possible solutions:
We will have a next step?
Searching the internet, I found these possible solutions:
That's the lsusb result:linux-kplg:/home/sergio # /usr/sbin/usb_modeswitch -v 2001 -p a401 -d 1
Looking for default devices ...
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Accessing device 005 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using interface number 0
Using endpoints 0x01 (out) and 0x81 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
No driver found. Either detached before or never attached
SCSI inquiry data (for identification)
-------------------------
Vendor String:
Model String: SD Storage
Revision String: 0000
-------------------------
USB description data (for identification)
-------------------------
Manufacturer: Mobile Connect
Product: Mobile Connect
Serial No.: 0123456789ABCDEF
-------------------------
Only detaching storage driver for switching ...
Any driver was already detached for inquiry
-> Run lsusb to note any changes. Bye.
No conection!
linux-kplg:/home/sergio # lsusb
Bus 001 Device 002: ID 192f:0716 Avago Technologies, Pte.
Bus 001 Device 005: ID 2001:a401 D-Link Corp.
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0b38:0010 Gear Head 107-Key Keyboard
linux-kplg:/home/sergio #
We will have a next step?
Re: Modem D-Link DWM-221
Hi, please change EnableLogging=0 to EnableLogging=1 in
then plug your modem to pc and post here content of
Also post part of dmesg output which contain info related to usb modem for example type dmesg remember last number of massages, plug your modem type dmesg again and paste here new stuff of it output. Also u could give us output of
Code: Select all
sudo gedit /etc/usb_modeswitch.conf
Code: Select all
gedit /vat/log/usb_modeswitch.logCode: Select all
lsusb -v -d 192f:0716-
sergiogelli
- Posts: 11
- Joined: 24 Dec 2014, 12:18
Re: Modem D-Link DWM-221
Only for information
I find and install a driver for Ubuntu
But I uses OpenSuse 13,1 with KDE and the modem still not working
Follow, results of your requests:
1- /etc/usb_modeswitch.conf -- Now is changed
2- Modem is plugged again
3- this file "usb_modeswitch.log" does not exists in anywhere from my PC
4 -------------------------------------
The part of dmesg output:
Result from lsusb -v -d 192f:0716
I find and install a driver for Ubuntu
But I uses OpenSuse 13,1 with KDE and the modem still not working
Follow, results of your requests:
1- /etc/usb_modeswitch.conf -- Now is changed
2- Modem is plugged again
3- this file "usb_modeswitch.log" does not exists in anywhere from my PC
4 -------------------------------------
The part of dmesg output:
Code: Select all
K
[ 2043.029196] usb 1-1: new high-speed USB device number 13 using xhci_hcd
[ 2043.041301] usb 1-1: New USB device found, idVendor=2001, idProduct=a401
[ 2043.041308] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2043.041311] usb 1-1: Product: Mobile Connect
[ 2043.041314] usb 1-1: Manufacturer: Mobile Connect
[ 2043.041316] usb 1-1: SerialNumber: 0123456789ABCDEF
[ 2043.047267] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 2043.047525] scsi9 : usb-storage 1-1:1.0
[ 2044.051445] scsi 9:0:0:0: Direct-Access SD Storage 0000 PQ: 0 ANSI: 2
[ 2044.055388] sd 9:0:0:0: Attached scsi generic sg2 type 0
[ 2044.059067] scsi 9:0:0:1: CD-ROM Mass Storage 0000 PQ: 0 ANSI: 2
[ 2044.059710] sd 9:0:0:0: [sdb] Unit Not Ready
[ 2044.059715] sd 9:0:0:0: [sdb]
[ 2044.059718] Sense Key : Illegal Request [current]
[ 2044.059722] sd 9:0:0:0: [sdb]
[ 2044.059725] Add. Sense: Invalid command operation code
[ 2044.064618] sr1: scsi-1 drive
[ 2044.064809] sr 9:0:0:1: Attached scsi CD-ROM sr1
[ 2044.065234] sr 9:0:0:1: Attached scsi generic sg3 type 5
[ 2044.066646] sd 9:0:0:0: [sdb] READ CAPACITY failed
[ 2044.066654] sd 9:0:0:0: [sdb]
[ 2044.066656] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2044.066659] sd 9:0:0:0: [sdb]
[ 2044.066661] Sense Key : Illegal Request [current]
[ 2044.066665] sd 9:0:0:0: [sdb]
[ 2044.066669] Add. Sense: Invalid command operation code
[ 2044.066856] sd 9:0:0:0: [sdb] Write Protect is off
[ 2044.066861] sd 9:0:0:0: [sdb] Mode Sense: 0f 00 00 00
[ 2044.067366] sd 9:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2044.069321] sd 9:0:0:0: [sdb] Unit Not Ready
[ 2044.069328] sd 9:0:0:0: [sdb]
[ 2044.069330] Sense Key : Illegal Request [current]
[ 2044.069334] sd 9:0:0:0: [sdb]
[ 2044.069338] Add. Sense: Invalid command operation code
[ 2044.090868] sd 9:0:0:0: [sdb] READ CAPACITY failed
[ 2044.090875] sd 9:0:0:0: [sdb]
[ 2044.090878] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2044.090880] sd 9:0:0:0: [sdb]
[ 2044.090882] Sense Key : Illegal Request [current]
[ 2044.090886] sd 9:0:0:0: [sdb]
[ 2044.090889] Add. Sense: Invalid command operation code
[ 2044.110853] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[ 2045.215936] usb 1-1: USB disconnect, device number 13
[ 2045.219877] sd 9:0:0:0: [sdb] Synchronizing SCSI cache
[ 2045.219982] sd 9:0:0:0: [sdb]
[ 2045.219989] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2045.506799] usb 1-1: new high-speed USB device number 14 using xhci_hcd
[ 2045.519898] usb 1-1: New USB device found, idVendor=2001, idProduct=7e19
[ 2045.519908] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2045.519914] usb 1-1: Product: Mobile Connect
[ 2045.519919] usb 1-1: Manufacturer: Mobile Connect
[ 2045.519924] usb 1-1: SerialNumber: 0123456789ABCDEF
[ 2045.526867] usb-storage 1-1:1.5: USB Mass Storage device detected
[ 2045.527009] scsi10 : usb-storage 1-1:1.5
[ 2046.529403] scsi 10:0:0:0: Direct-Access SD Storage 0000 PQ: 0 ANSI: 2
[ 2046.530300] sd 10:0:0:0: Attached scsi generic sg2 type 0
[ 2046.534483] sd 10:0:0:0: [sdb] Unit Not Ready
[ 2046.534493] sd 10:0:0:0: [sdb]
[ 2046.534498] Sense Key : Illegal Request [current]
[ 2046.534506] sd 10:0:0:0: [sdb]
[ 2046.534511] Add. Sense: Invalid command operation code
[ 2046.536673] sd 10:0:0:0: [sdb] READ CAPACITY failed
[ 2046.536679] sd 10:0:0:0: [sdb]
[ 2046.536682] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2046.536684] sd 10:0:0:0: [sdb]
[ 2046.536686] Sense Key : Illegal Request [current]
[ 2046.536690] sd 10:0:0:0: [sdb]
[ 2046.536693] Add. Sense: Invalid command operation code
[ 2046.537074] sd 10:0:0:0: [sdb] Write Protect is off
[ 2046.537079] sd 10:0:0:0: [sdb] Mode Sense: 0f 00 00 00
[ 2046.537451] sd 10:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2046.539722] sd 10:0:0:0: [sdb] Unit Not Ready
[ 2046.539729] sd 10:0:0:0: [sdb]
[ 2046.539732] Sense Key : Illegal Request [current]
[ 2046.539736] sd 10:0:0:0: [sdb]
[ 2046.539740] Add. Sense: Invalid command operation code
[ 2046.542662] sd 10:0:0:0: [sdb] READ CAPACITY failed
[ 2046.542669] sd 10:0:0:0: [sdb]
[ 2046.542672] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2046.542674] sd 10:0:0:0: [sdb]
[ 2046.542676] Sense Key : Illegal Request [current]
[ 2046.542681] sd 10:0:0:0: [sdb]
[ 2046.542684] Add. Sense: Invalid command operation code
[ 2046.545524] sd 10:0:0:0: [sdb] Attached SCSI removable disk
linux-kplg:/home/sergio #
Code: Select all
Bus 001 Device 012: ID 192f:0716 Avago Technologies, Pte.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x192f Avago Technologies, Pte.
idProduct 0x0716
bcdDevice 0.00
iManufacturer 1 Avago
iProduct 2 USB LaserStream(TM) Mouse
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 64
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0005 1x 5 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
-
sergiogelli
- Posts: 11
- Joined: 24 Dec 2014, 12:18
Re: Modem D-Link DWM-221
help....please reply!!!!!!!
Re: Modem D-Link DWM-221
Your dongle with initial id 2001:a401 did switch here:
Make it switch and show me the output from lsusb -v -d 2001:7e19[ 2045.519898] usb 1-1: New USB device found, idVendor=2001, idProduct=7e19
[ 2045.519908] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
-
sergiogelli
- Posts: 11
- Joined: 24 Dec 2014, 12:18
Re: Modem D-Link DWM-221
I use the numbers a401 and 7e19LOM wrote:Your dongle with initial id 2001:a401 did switch here:
Make it switch and show me the output from lsusb -v -d 2001:7e19[ 2045.519898] usb 1-1: New USB device found, idVendor=2001, idProduct=7e19
[ 2045.519908] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
The Results is the same error.
I abandoned this brand of modem and now I am testing an Huawey E3276, but don't work too.
Thanks for the help
Re: Modem D-Link DWM-221
Please help us too and post the output of "lsusb -v -d 2001:7e19" after plugging the D-Link modem!
-
sergiogelli
- Posts: 11
- Joined: 24 Dec 2014, 12:18
Re: Modem D-Link DWM-221
Unfortunately I do not have this modem D-Link, so I can not send you the requested information.Josh wrote:Please help us too and post the output of "lsusb -v -d 2001:7e19" after plugging the D-Link modem!
I returned this modem to the seller, because I have not found anything that made it work, even though I have sought instructions for more than 15 days.
Thanks.
Re: Modem D-Link DWM-221
Never mind, I think I already know how to switch it but would also like to see what kind of modem/network adapter it became after switching.sergiogelli wrote: Unfortunately I do not have this modem D-Link, so I can not send you the requested information.
I returned this modem to the seller, because I have not found anything that made it work, even though I have sought instructions for more than 15 days.
Thanks.
There will come other users with this dongle so we will eventually suss it all out.
-
sergiogelli
- Posts: 11
- Joined: 24 Dec 2014, 12:18
Re: Modem D-Link DWM-221
Follows the result of the command "lsusb"
So also follows the command "lsusb" with that number.
If you want more information, just ask.
The product number appeared as "a401" in some instanceslinux-a49v:/home/sergio # lsusb -v -d 2001:7e19
linux-a49v:/home/sergio #
So also follows the command "lsusb" with that number.
As said before, these results were made without the connected modem.linux-a49v:/home/sergio # lsusb -v -d 2001:a401
linux-a49v:/home/sergio #
If you want more information, just ask.
Last edited by sergiogelli on 16 Jan 2015, 13:45, edited 1 time in total.
Re: Modem D-Link DWM-221
Thanks but we will have to wait for someone who has the modem, lsusb will only display info for devices which are present on the usb port.
-
sergiogelli
- Posts: 11
- Joined: 24 Dec 2014, 12:18
Re: Modem D-Link DWM-221
Perhaps, this information I posted on another forum will be useful to you.
But, exists more. https://forums.opensuse.org/showthread. ... dem-D-Link
But, exists more. https://forums.opensuse.org/showthread. ... dem-D-Link
The relevant section (look for the vendor and product code for lsusb output for D-Link device) is
Code:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2001 ProdID=a401 Rev=02.32
S: Manufacturer=Mobile Connect
S: Product=Mobile Connect
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
-
lhguanabara
- Posts: 8
- Joined: 19 Jan 2015, 18:27
- Location: Brazil
Re: Modem D-Link DWM-221
There is the lsusb -v -d 2001:7e19 output:LOM wrote:Thanks but we will have to wait for someone who has the modem, lsusb will only display info for devices which are present on the usb port.
Code: Select all
Bus 001 Device 004: ID 2001:7e19 D-Link Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2001 D-Link Corp.
idProduct 0x7e19
bcdDevice 2.32
iManufacturer 1 Mobile Connect
iProduct 2 Mobile Connect
iSerial 3 0123456789ABCDEF
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 232
bNumInterfaces 6
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x89 EP 9 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 9
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 5
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 4 Mass Storage
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8a EP 10 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Re: Modem D-Link DWM-221
Thanx. lets see if we can get the dongle to switch with this cmd:lhguanabara wrote: There is the lsusb -v -d 2001:7e19 output:
snip
sudo usb_modeswitch -v 2001 -p a401 -V 2001 -P 7e19 -K -W