Activation Codes and Methods, Hardware Details, Sniffing
Post Reply
Cezary
Posts: 3
Joined: 24 Feb 2011, 20:09

New devices

Post by Cezary » 13 Feb 2015, 08:16

Huwei E3372s-153 (from Polish Orange)

12d1:15cf

Code: Select all

# Huawei E3372
TargetVendor=0x12d1
TargetProduct=0x1506
HuaweiNewMode=1
Huawei E5377 (Polish Orange/Play)

12d1:1f02

Code: Select all

# Huawei E5377

TargetVendor=  0x12d1
TargetProduct= 0x14dc

MessageContent="55534243123456780000000000000a11062000000000000100000000000000"
NoDriverLoading=1

LOM
Posts: 1350
Joined: 11 Jul 2012, 15:14
Location: Koh Samui, TH

Re: New devices

Post by LOM » 13 Feb 2015, 11:53

Thanks for the report, those devices will be added to next release of the datapackage.

The switch message you have listed for E5377 is not a standard one, HuaweiNewMode should work and should be used for all Huawei dongles except for a few very old ones which uses HuaweiMode.

Cezary
Posts: 3
Joined: 24 Feb 2011, 20:09

Re: New devices

Post by Cezary » 09 Mar 2015, 23:46

And next:

1782:0003

Code: Select all

# Spreadtrum SC7702 HSPA+ Datacard
Configuration=2

Josh
Site Admin
Posts: 6569
Joined: 03 Nov 2007, 00:30

Re: New devices

Post by Josh » 11 Mar 2015, 00:52

Thanks for that one too !!

Would you mind posting the complete output of "sudo lsusb -v -d 1782:0003" with that stick attached?

jipite
Posts: 4
Joined: 29 Mar 2015, 20:17

Re: New devices

Post by jipite » 29 Mar 2015, 20:25

Hello

I have huawei e3372 detected as 12d1 155f connected with otg cable on carpad nu3001.
It doesn't work with ppp widget 2.
I have seen that i have to create a file in usb_modeswitch.d with name 12d1_155f
I put :
TargetVendor=0x12d1
TargetProduct=0x1506
HuaweiNewMode=1
in the file but it doesn't work too.

Can you help me please ?

Bye

LOM
Posts: 1350
Joined: 11 Jul 2012, 15:14
Location: Koh Samui, TH

Re: New devices

Post by LOM » 30 Mar 2015, 06:03

jipite wrote:
I have huawei e3372 detected as 12d1 155f connected with otg cable on carpad nu3001.
It doesn't work with ppp widget 2.
I have seen that i have to create a file in usb_modeswitch.d with name 12d1_155f
I put :
TargetVendor=0x12d1
TargetProduct=0x1506
HuaweiNewMode=1
in the file but it doesn't work too.
12d1:155f is a new usb id not seen before and there are no google hits for it on the net.
How do you know that it should become 12d1:1506 after mode switching?

jipite
Posts: 4
Joined: 29 Mar 2015, 20:17

Re: New devices

Post by jipite » 30 Mar 2015, 07:45

Hello

I have seen it in the post of Cesary.

Bye

LOM
Posts: 1350
Joined: 11 Jul 2012, 15:14
Location: Koh Samui, TH

Re: New devices

Post by LOM » 30 Mar 2015, 17:26

jipite wrote:Hello

I have seen it in the post of Cesary.

Bye
His usb id was 12d1:15cf before switching, not same as yours.

mxr
Posts: 6
Joined: 27 Mar 2015, 11:34

Re: New devices

Post by mxr » 31 Mar 2015, 19:27

jipite wrote:Hello

I have huawei e3372 detected as 12d1 155f connected with otg cable on carpad nu3001.
It doesn't work with ppp widget 2.
I have seen that i have to create a file in usb_modeswitch.d with name 12d1_155f
I put :
TargetVendor=0x12d1
TargetProduct=0x1506
HuaweiNewMode=1
in the file but it doesn't work too.

Can you help me please ?

Bye
I have also an E3372 but 12d1:15cd. For me it works with latest usb_modeswitch and -J by becoming 12d1:1506. You should check the version of your usb_modeswitch. I was testing on Linux Mint and had to remove the version that came with it by default and make install of the latest version and make install of the latest data package.

P.S. While testing on my router, I somehow managed to put the device, but only once, in 12d1:155f mode. But that was only one time. All other times the device became for me 12d1:1506.

LOM
Posts: 1350
Joined: 11 Jul 2012, 15:14
Location: Koh Samui, TH

Re: New devices

Post by LOM » 14 Apr 2015, 16:28

Josh wrote:Thanks for that one too !!

Would you mind posting the complete output of "sudo lsusb -v -d 1782:0003" with that stick attached?

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(unk. ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2
P: Vendor=1782 ProdID=0003 Rev= 0.00
S: Manufacturer=Spreadtrum
S: Product=SC7702 HSPA+ Datacard
S: SerialNumber=2BAC9D813F231176
C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA

I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

C:* #Ifs= 5 Cfg#= 2 Atr=80 MxPwr=250mA

I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

Post Reply