Activation Codes and Methods, Hardware Details, Sniffing
Post Reply
Posts: 1403
Joined: 11 Jul 2012, 15:14
Location: Koh Samui, TH

LG VL600 and AD600

Post by LOM » 06 Feb 2017, 23:38

AD600 with initial id 1004:6190 switches to 1004:61a7 and the data package has this correct.

VL600 has an unknown initial id (if there is any), the data package is wrong when saying that 1004:61aa switches into 1004:61a7 (which is AD600).
Blame ... f=2&t=1107

Code: Select all

T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=02(commc) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1004 ProdID=61aa Rev=01.00
S: Manufacturer=LG ELECTRONICSInc
S: Product=LG UDC-AHB Subsystem
C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=400mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=
I: If#= 2 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=
I: If#= 3 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=
There is not even a storage interface for sending a switch cmd to in 1004:61aa

Post Reply