Huawei Maimang 5 (mla10) 12d1:1082 tried everything
Hello,
Old modeswitch message doesn't seem to work on new (android 4+) Huawei phones
I tried
55534243123456780600000080000601000000000000000000000000000000
55534243123456780600000080010a11060000000000000000000000000000
Old and new mode
Old modeswitch message doesn't seem to work on new (android 4+) Huawei phones
I tried
55534243123456780600000080000601000000000000000000000000000000
55534243123456780600000080010a11060000000000000000000000000000
Old and new mode
Re: Huawei Maimang 5 (mla10) 12d1:1082 tried everything
I don't think these more modern Huawei phones are switched by sending a switch msg to them.
Isn't there a menu setting for choosing usb mode (MTP or Tether) ?
Isn't there a menu setting for choosing usb mode (MTP or Tether) ?
Re: Huawei Maimang 5 (mla10) 12d1:1082 tried everything
It appears as a cdrom with drivers.
Re: Huawei Maimang 5 (mla10) 12d1:1082 tried everything
What other interfaces than a usb mass storage interface does it present?paul2 wrote:It appears as a cdrom with drivers.
Paste the output from lsusb -v -d 12d1:1082 here
Re: Huawei Maimang 5 (mla10) 12d1:1082 tried everything
Code: Select all
Bus 001 Device 004: ID 12d1:1082 Huawei Technologies Co., Ltd. HUAWEI MLA-AL10
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x12d1 Huawei Technologies Co., Ltd.
idProduct 0x1082
bcdDevice 3.18
iManufacturer 1 HUAWEI
iProduct 2 HUAWEI MLA-AL10
iSerial 3 EJL7N16B06001756
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x003e
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 0
iInterface 7 MTP
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x001c 1x 28 bytes
bInterval 6
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 4 Mass Storage
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0002
(Bus Powered)
Remote Wakeup Enabled
Re: Huawei Maimang 5 (mla10) 12d1:1082 tried everything
Ok, so you have got an interface for Media Transfer Protocol (pics, videos) but no dialup modem or network interface for tethering.
Can MS Windows switch the phone and use it for internet connection?
You mentioned drivers on the virtual cd-rom can you copy them and paste those ending in .inf here please, might give a hint if there is another usb id for the phone.
Can MS Windows switch the phone and use it for internet connection?
You mentioned drivers on the virtual cd-rom can you copy them and paste those ending in .inf here please, might give a hint if there is another usb id for the phone.
Re: Huawei Maimang 5 (mla10) 12d1:1082 tried everything
Some time it works depending on whether you connected it to Windows prior to connecting it to a Linux machine. Now it started to work out of a sudden.
Re: Huawei Maimang 5 (mla10) 12d1:1082 tried everything
What is it that works now, isn't it USB tethering you want to get working?
Re: Huawei Maimang 5 (mla10) 12d1:1082 tried everything
I wanted it to switch to MTP mode.
Huawei has a nasty habit forcing users to install their drivers and software (HiSuite) just to switch the device into MTP.
Without it, it just appears as a CDROM.
USB tethering works, surprisingly.
Huawei has a nasty habit forcing users to install their drivers and software (HiSuite) just to switch the device into MTP.
Without it, it just appears as a CDROM.
USB tethering works, surprisingly.
Re: Huawei Maimang 5 (mla10) 12d1:1082 tried everything
Ok, lets hope it keeps working in the future also.paul2 wrote:I wanted it to switch to MTP mode.
Huawei has a nasty habit forcing users to install their drivers and software (HiSuite) just to switch the device into MTP.
Without it, it just appears as a CDROM.
USB tethering works, surprisingly.
I'd expect it to change usb id if the MTP interface is gone and only the cd-rom is present, that's how most other Android phones behave but Huawei may be different from them.
What is the usb id when you tether? Can you paste a verbose lsusb listing here when in tether mode please.