| |
Activation Codes and Methods, Hardware Details, Sniffing
-
Terramoto
- Posts: 8
- Joined: 02 Sep 2020, 16:15
Post
by Terramoto » 02 Sep 2020, 16:37
Hello,
I'm attempting to get an internet connection from this Huawei modem, i've tried adding it to nmcli but it doesn't recognize the ttyusb0/1/2 as a broadband modem, ifconfig -a doesn't list the interface. I tried following some guides online but i didn't manage to get a interface or gsm connection to this modem. I've seen some people with similar stats getting a connection through but i think i'm missing something at this point, could someone point me in the right direction?
lsusb:
Bus 003 Device 002: ID 12d1:1c05 Huawei Technologies Co., Ltd. Broadband stick (modem on)
uname -a:
5.4.34-1-pve #1 SMP PVE 5.4.34-2
lsusb -vvv:
Code: Select all Bus 003 Device 013: ID 12d1:1c05 Huawei Technologies Co., Ltd. Broadband stick (modem on)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x12d1 Huawei Technologies Co., Ltd.
idProduct 0x1c05 Broadband stick (modem on)
bcdDevice 1.02
iManufacturer 2 HUAWEI Technology
iProduct 1 HUAWEI Mobile
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0091
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 3 Huawei Configuration
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 255 Vendor Specific (MSFT RNDIS?)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x00
bDataInterface 0
CDC Union:
bMasterInterface 0
bSlaveInterface 0 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 255 Vendor Specific (MSFT RNDIS?)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x00
bDataInterface 1
CDC Union:
bMasterInterface 1
bSlaveInterface 1 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 255 Vendor Specific (MSFT RNDIS?)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x00
bDataInterface 2
CDC Union:
bMasterInterface 2
bSlaveInterface 2 2
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
[/quote]
usb-devices:
[quote]T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1c05 Rev=01.02
S: Manufacturer=HUAWEI Technology
S: Product=HUAWEI Mobile
C: #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=02(commc) Sub=02 Prot=ff Driver=option
I: If#=0x1 Alt= 0 #EPs= 2 Cls=02(commc) Sub=02 Prot=ff Driver=option
I: If#=0x2 Alt= 0 #EPs= 2 Cls=02(commc) Sub=02 Prot=ff Driver=option
usb_modeswitch:
# usb_modeswitch -v12d1 -p1c05 -J
Look for default devices ...
Found devices in default mode (1)
Access device 002 on bus 003
Get the current device configuration ...
Current configuration number is 1
Use interface number 0
with class 2
Error: can't use storage command in MessageContent with interface 0; interface class is 2, expected 8. Abort
dmesg:
# dmesg | grep "usb 3-2"
[ 1.223584] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 1.245392] usb 3-2: New USB device found, idVendor=12d1, idProduct=1c05, bcdDevice= 1.02
[ 1.245396] usb 3-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 1.245398] usb 3-2: Product: HUAWEI Mobile
[ 1.245400] usb 3-2: Manufacturer: HUAWEI Technology
[ 4.171664] usb 3-2: bad CDC descriptors
[ 4.171684] usb 3-2: bad CDC descriptors
[ 4.171698] usb 3-2: bad CDC descriptors
[ 4.179819] usb 3-2: bad CDC descriptors
[ 4.182758] usb 3-2: bad CDC descriptors
[ 4.186800] usb 3-2: bad CDC descriptors
[ 4.194995] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 4.195097] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 4.195181] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB2
-
Terramoto
- Posts: 8
- Joined: 02 Sep 2020, 16:15
Post
by Terramoto » 02 Sep 2020, 23:36
Previously i had flashed a firmware which appeared to have changed the ID to 12d1:14fe which was detected as a ethernet interface but because it kept rebooting i flashed the stock back. Unfortunately the stock firmware doesn't seem to be working with this vendor/product.
cat /var/log/usb_modeswitch_ttyUSB_3-2\:1.0:
Code: Select all USB_ModeSwitch log from Mon Aug 31 23:56:36 WEST 2020
Use global config file: /etc/usb_modeswitch.conf
usb_modeswitch called with --symlink-name
parameter: /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/ttyUSB0/tty/ttyUSB0
My name is ttyUSB0
Check my endpoints ...
in /sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0
check ep_81 ...
ep_81 has interrupt transfer type
--> I am an interrupt port
--> No interrupt interface below me
Return symlink name "gsmmodem" and exit
cat /var/log/usb_modeswitch_ttyUSB_3-2\:1.1:
Code: Select all USB_ModeSwitch log from Mon Aug 31 23:56:36 WEST 2020
Use global config file: /etc/usb_modeswitch.conf
usb_modeswitch called with --symlink-name
parameter: /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/ttyUSB1/tty/ttyUSB1
My name is ttyUSB1
Check my endpoints ...
in /sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1
check ep_02 ...
check ep_83 ...
--> I am not an interrupt port
Return empty name and exit
cat /var/log/usb_modeswitch_ttyUSB_3-2\:1.2:
Code: Select all USB_ModeSwitch log from Mon Aug 31 23:56:36 WEST 2020
Use global config file: /etc/usb_modeswitch.conf
usb_modeswitch called with --symlink-name
parameter: /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/ttyUSB2/tty/ttyUSB2
My name is ttyUSB2
Check my endpoints ...
in /sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2
check ep_03 ...
check ep_84 ...
--> I am not an interrupt port
Return empty name and exit
-
LOM
- Posts: 1404
- Joined: 11 Jul 2012, 15:14
- Location: Koh Samui, TH
Post
by LOM » 03 Sep 2020, 06:39
12d1:1c05 is not an id that a working E5372 should get, it is a debug id which you have ended up with because something went wrong when you flashed it.
The 3 serial interfaces are for testing, it is possible that the modem function (ttyUSB0) is fully working but you do at least need a ppp dial-up program for creating a connection and creating the ppp0 device which NetworkManager can handle.
-
Josh
- Site Admin
- Posts: 6570
- Joined: 03 Nov 2007, 00:30
Post
by Josh » 03 Sep 2020, 17:38
It's possible that there is a NCM port exposed in that mode.
Can you post the output of "lsusb -v -d 12d1:1c05" here?
Be sure to paste the output between [code] tags to keep the formatting. The button in the editor shows '</>'.
-
Terramoto
- Posts: 8
- Joined: 02 Sep 2020, 16:15
Post
by Terramoto » 03 Sep 2020, 18:42
Hey,
Thanks for you help! After Josh reply i went to flash the firmware again and this time it is loading the id 12d1:1506 which is creating a ethernet interface. I was wondering if you could help me with another issue, when i plug the device the interface shows up as wxx0c5b8f279a64. With it i can either set a static IP or fetch one from the device through dhclient and that's fine but when i boot the system the interface does not appear. I need to remove the device and plug it back in in order to get that interface again.
during boot the drivers being loaded on all ports is usbfs while when i re-plug the device i get:
Driver=option
Driver=huawei_cdc_ncm
driver=usb-storage
driver=usb-storage
Is there a way i can force the right drivers or is this related to the mode switch?
Last edited by Terramoto on 04 Sep 2020, 10:52, edited 2 times in total.
-
LOM
- Posts: 1404
- Joined: 11 Jul 2012, 15:14
- Location: Koh Samui, TH
Post
by LOM » 04 Sep 2020, 05:06
Terramoto wrote: ↑03 Sep 2020, 18:42
Hey,
Thanks for you help! After Josh reply i went to flash the firmware again and this time it is loading the id 12d1:1596 which is creating a ethernet interface.
On that ethernet interface you will get a private IP address from within E5372 LAN where also the wifi clients will reside.
The internal battery is charged via the USB so if you get lots of USB disconnects then it is probably your clients USB port that can not provide enough current for charging the battery so the USB port may power down temporarily due to over-current.
Use a USB3 port (max current 900mA) instead of USB2 (max current 500mA) if you can.
Can you please post the lsusb -vd 12d1:1596, it is a new id to me and I would like to see its interface composition.
-
Terramoto
- Posts: 8
- Joined: 02 Sep 2020, 16:15
Post
by Terramoto » 04 Sep 2020, 10:54
LOM wrote: ↑04 Sep 2020, 05:06
Terramoto wrote: ↑03 Sep 2020, 18:42
Hey,
Thanks for you help! After Josh reply i went to flash the firmware again and this time it is loading the id 12d1:1596 which is creating a ethernet interface.
On that ethernet interface you will get a private IP address from within E5372 LAN where also the wifi clients will reside.
The internal battery is charged via the USB so if you get lots of USB disconnects then it is probably your clients USB port that can not provide enough current for charging the battery so the USB port may power down temporarily due to over-current.
Use a USB3 port (max current 900mA) instead of USB2 (max current 500mA) if you can.
Can you please post the lsusb -vd 12d1:1596, it is a new id to me and I would like to see its interface composition.
Sorry for the typo, it's the 12d1:1506 i believe this one is already documented on your tool.
Just in case:
Code: Select all Bus 003 Device 007: ID 12d1:1506 Huawei Technologies Co., Ltd. Modem/Networkcard
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x12d1 Huawei Technologies Co., Ltd.
idProduct 0x1506 Modem/Networkcard
bcdDevice 1.02
iManufacturer 2 HUAWEI Technology
iProduct 1 HUAWEI Mobile
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x00ad
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 3 Huawei Configuration
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 18
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 06 24 06 00 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 22
iInterface 0
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 06 24 1a 00 01 1f
** UNRECOGNIZED: 0d 24 0f 04 0f 00 00 00 ea 05 03 00 01
** UNRECOGNIZED: 05 24 06 01 01
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 22
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0000
(Bus Powered)
-
LOM
- Posts: 1404
- Joined: 11 Jul 2012, 15:14
- Location: Koh Samui, TH
Post
by LOM » 05 Sep 2020, 04:45
Terramoto wrote: ↑03 Sep 2020, 18:42
Hey,
I was wondering if you could help me with another issue, when i plug the device the interface shows up as wxx0c5b8f279a64. With it i can either set a static IP or fetch one from the device through dhclient and that's fine but when i boot the system the interface does not appear. I need to remove the device and plug it back in in order to get that interface again.
during boot the drivers being loaded on all ports is usbfs while when i re-plug the device i get:
Driver=option
Driver=huawei_cdc_ncm
driver=usb-storage
driver=usb-storage
Is there a way i can force the right drivers or is this related to the mode switch?
It is not clear from your description what happens at boot, show me the part of dmesg where the E5372 is first detected, the driver loading should follow almost immediately afterwards. Where do you see usbfs being loaded as drivers?
The cmd usb-devices displays the interfaces and the drivers being bound to them, it should either show the drivers you have listed above or show none. I've never seen usbfs listed as bound to an interface.
Is your hardware a RaspberryPi? Which kernel version are you on?
-
Terramoto
- Posts: 8
- Joined: 02 Sep 2020, 16:15
Post
by Terramoto » 05 Sep 2020, 12:04
It's a Lenovo T430 running 5.4.34, i've notice this happens whenever i plug the device before signing in.
usb-devives:
Code: Select all # usb-devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=05.04
S: Manufacturer=Linux 5.4.34-1-pve ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1a.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 6
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0024 Rev=00.00
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=147e ProdID=2020 Rev=00.01
S: Manufacturer=Auth
S: Product=Biometric Coprocessor
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=21e6 Rev=01.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=0C84DCDC9BB5
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
I: If#=0x3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=03 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04f2 ProdID=b2db Rev=05.64
S: Manufacturer=Chicony Electronics Co., Ltd.
S: Product=Integrated Camera
C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=200mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
I: If#=0x1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=05.04
S: Manufacturer=Linux 5.4.34-1-pve ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 8
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0024 Rev=00.00
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=05.04
S: Manufacturer=Linux 5.4.34-1-pve xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1506 Rev=01.02
S: Manufacturer=HUAWEI Technology
S: Product=HUAWEI Mobile
C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=usbfs
I: If#=0x1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=usbfs
I: If#=0x2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usbfs
I: If#=0x3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usbfs
T: Bus=03 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 4
P: Vendor=0bdb ProdID=1926 Rev=00.00
S: Manufacturer=Lenovo
S: Product=H5321 gw
S: SerialNumber=E462F817FB5CA7M0
C: #Ifs=11 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 0 Cls=02(commc) Sub=08 Prot=00 Driver=(none)
I: If#=0x1 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm
I: If#=0xa Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
I: If#=0x2 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm
I: If#=0x4 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
I: If#=0x5 Alt= 0 #EPs= 1 Cls=02(commc) Sub=09 Prot=01 Driver=cdc_wdm
I: If#=0x6 Alt= 1 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x7 Alt= 2 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x8 Alt= 0 #EPs= 1 Cls=02(commc) Sub=09 Prot=01 Driver=cdc_wdm
I: If#=0x9 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 4
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev=05.04
S: Manufacturer=Linux 5.4.34-1-pve xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
usb-devices after re-plugging:
Code: Select all # usb-devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=05.04
S: Manufacturer=Linux 5.4.34-1-pve ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1a.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 6
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0024 Rev=00.00
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=147e ProdID=2020 Rev=00.01
S: Manufacturer=Auth
S: Product=Biometric Coprocessor
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=21e6 Rev=01.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=0C84DCDC9BB5
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
I: If#=0x3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=03 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04f2 ProdID=b2db Rev=05.64
S: Manufacturer=Chicony Electronics Co., Ltd.
S: Product=Integrated Camera
C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=200mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
I: If#=0x1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=05.04
S: Manufacturer=Linux 5.4.34-1-pve ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 8
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0024 Rev=00.00
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=05.04
S: Manufacturer=Linux 5.4.34-1-pve xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1506 Rev=01.02
S: Manufacturer=HUAWEI Technology
S: Product=HUAWEI Mobile
C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=usbfs
I: If#=0x1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=usbfs
I: If#=0x2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usbfs
I: If#=0x3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usbfs
T: Bus=03 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 4
P: Vendor=0bdb ProdID=1926 Rev=00.00
S: Manufacturer=Lenovo
S: Product=H5321 gw
S: SerialNumber=E462F817FB5CA7M0
C: #Ifs=11 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 0 Cls=02(commc) Sub=08 Prot=00 Driver=(none)
I: If#=0x1 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm
I: If#=0xa Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
I: If#=0x2 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm
I: If#=0x4 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
I: If#=0x5 Alt= 0 #EPs= 1 Cls=02(commc) Sub=09 Prot=01 Driver=cdc_wdm
I: If#=0x6 Alt= 1 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x7 Alt= 2 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x8 Alt= 0 #EPs= 1 Cls=02(commc) Sub=09 Prot=01 Driver=cdc_wdm
I: If#=0x9 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 4
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev=05.04
S: Manufacturer=Linux 5.4.34-1-pve xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
root@servidor:~# usb-devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=05.04
S: Manufacturer=Linux 5.4.34-1-pve ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1a.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 6
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0024 Rev=00.00
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=147e ProdID=2020 Rev=00.01
S: Manufacturer=Auth
S: Product=Biometric Coprocessor
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=21e6 Rev=01.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=0C84DCDC9BB5
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
I: If#=0x3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=03 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04f2 ProdID=b2db Rev=05.64
S: Manufacturer=Chicony Electronics Co., Ltd.
S: Product=Integrated Camera
C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=200mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
I: If#=0x1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=05.04
S: Manufacturer=Linux 5.4.34-1-pve ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 8
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=0024 Rev=00.00
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=05.04
S: Manufacturer=Linux 5.4.34-1-pve xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1506 Rev=01.02
S: Manufacturer=HUAWEI Technology
S: Product=HUAWEI Mobile
C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=option
I: If#=0x1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm
I: If#=0x2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
I: If#=0x3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
T: Bus=03 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 4
P: Vendor=0bdb ProdID=1926 Rev=00.00
S: Manufacturer=Lenovo
S: Product=H5321 gw
S: SerialNumber=E462F817FB5CA7M0
C: #Ifs=11 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 0 Cls=02(commc) Sub=08 Prot=00 Driver=(none)
I: If#=0x1 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm
I: If#=0xa Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
I: If#=0x2 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm
I: If#=0x4 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
I: If#=0x5 Alt= 0 #EPs= 1 Cls=02(commc) Sub=09 Prot=01 Driver=cdc_wdm
I: If#=0x6 Alt= 1 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x7 Alt= 2 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x8 Alt= 0 #EPs= 1 Cls=02(commc) Sub=09 Prot=01 Driver=cdc_wdm
I: If#=0x9 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 4
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev=05.04
S: Manufacturer=Linux 5.4.34-1-pve xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
-
Terramoto
- Posts: 8
- Joined: 02 Sep 2020, 16:15
Post
by Terramoto » 05 Sep 2020, 12:05
dmesg:
Code: Select all # dmesg
[ 0.000000] Linux version 5.4.34-1-pve (build@pve) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PVE 5.4.34-2
(Thu, 07 May 2020 10:02:02 +0200) ()
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.34-1-pve root=/dev/mapper/pve-root ro quiet usbcore.autosuspend=-1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000cd513fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd514000-0x00000000dae9efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031e5fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000031e600000-0x000000031effffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 2349GCG/2349GCG, BIOS G1ETC1WW (2.81 ) 06/18/2019
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2594.145 MHz processor
[ 0.002037] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.002039] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.002046] last_pfn = 0x31e600 max_arch_pfn = 0x400000000
[ 0.002050] MTRR default type: uncachable
[ 0.002051] MTRR fixed ranges enabled:
[ 0.002052] 00000-9FFFF write-back
[ 0.002053] A0000-BFFFF uncachable
[ 0.002054] C0000-FFFFF write-protect
[ 0.002055] MTRR variable ranges enabled:
[ 0.002056] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.002057] 1 base 000000000 mask F80000000 write-back
[ 0.002058] 2 base 080000000 mask FC0000000 write-back
[ 0.002059] 3 base 0C0000000 mask FE0000000 write-back
[ 0.002059] 4 base 0DC000000 mask FFC000000 uncachable
[ 0.002060] 5 base 0DB000000 mask FFF000000 uncachable
[ 0.002061] 6 base 100000000 mask F00000000 write-back
[ 0.002062] 7 base 200000000 mask F00000000 write-back
[ 0.002063] 8 base 300000000 mask FE0000000 write-back
[ 0.002063] 9 base 31F000000 mask FFF000000 uncachable
[ 0.002513] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002704] last_pfn = 0xcd514 max_arch_pfn = 0x400000000
[ 0.002831] found SMP MP-table at [mem 0x000f0100-0x000f010f]
[ 0.002897] check: Scanning 1 areas for low memory corruption
[ 0.002902] BRK [0x18a401000, 0x18a401fff] PGTABLE
[ 0.002905] BRK [0x18a402000, 0x18a402fff] PGTABLE
[ 0.002906] BRK [0x18a403000, 0x18a403fff] PGTABLE
[ 0.002959] BRK [0x18a404000, 0x18a404fff] PGTABLE
[ 0.002961] BRK [0x18a405000, 0x18a405fff] PGTABLE
[ 0.003074] BRK [0x18a406000, 0x18a406fff] PGTABLE
[ 0.003235] BRK [0x18a407000, 0x18a407fff] PGTABLE
[ 0.003236] BRK [0x18a408000, 0x18a408fff] PGTABLE
[ 0.003352] BRK [0x18a409000, 0x18a409fff] PGTABLE
[ 0.003366] BRK [0x18a40a000, 0x18a40afff] PGTABLE
[ 0.003429] BRK [0x18a40b000, 0x18a40bfff] PGTABLE
[ 0.003657] RAMDISK: [mem 0x32f29000-0x3578bfff]
[ 0.003664] ACPI: Early table checksum verification disabled
[ 0.003667] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
[ 0.003671] ACPI: XSDT 0x00000000DAFFE170 0000C4 (v01 LENOVO TP-G1 00002810 PTL 00000002)
[ 0.003677] ACPI: FACP 0x00000000DAFE6000 00010C (v05 LENOVO TP-G1 00002810 PTL 00000002)
[ 0.003683] ACPI: DSDT 0x00000000DAFE8000 0103F7 (v01 LENOVO TP-G1 00002810 INTL 20061109)
[ 0.003686] ACPI: FACS 0x00000000DAF5A000 000040
[ 0.003688] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-G1 00002810 PTL 00000001)
[ 0.003691] ACPI: TCPA 0x00000000DAFFC000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.003694] ACPI: SSDT 0x00000000DAFFB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[ 0.003697] ACPI: SSDT 0x00000000DAFFA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[ 0.003700] ACPI: SSDT 0x00000000DAFF9000 000797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[ 0.003703] ACPI: HPET 0x00000000DAFE4000 000038 (v01 LENOVO TP-G1 00002810 PTL 00000002)
[ 0.003705] ACPI: APIC 0x00000000DAFE3000 000098 (v01 LENOVO TP-G1 00002810 PTL 00000002)
[ 0.003708] ACPI: MCFG 0x00000000DAFE2000 00003C (v01 LENOVO TP-G1 00002810 PTL 00000002)
[ 0.003711] ACPI: ECDT 0x00000000DAFE1000 000052 (v01 LENOVO TP-G1 00002810 PTL 00000002)
[ 0.003714] ACPI: FPDT 0x00000000DAFE0000 000064 (v01 LENOVO TP-G1 00002810 PTL 00000002)
[ 0.003716] ACPI: ASF! 0x00000000DAFE7000 0000A5 (v32 LENOVO TP-G1 00002810 PTL 00000002)
[ 0.003719] ACPI: UEFI 0x00000000DAFDF000 00003E (v01 LENOVO TP-G1 00002810 PTL 00000002)
[ 0.003722] ACPI: UEFI 0x00000000DAFDE000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.003725] ACPI: POAT 0x00000000DAFDD000 000055 (v03 LENOVO TP-G1 00002810 PTL 00000002)
[ 0.003728] ACPI: SSDT 0x00000000DAFDC000 000C51 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.003731] ACPI: SSDT 0x00000000DAFDB000 000A83 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.003734] ACPI: DMAR 0x00000000DAFDA000 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.003737] ACPI: UEFI 0x00000000DAFD9000 000292 (v01 LENOVO TP-G1 00002810 PTL 00000002)
[ 0.003739] ACPI: DBG2 0x00000000DAFD8000 0000E9 (v00 LENOVO TP-G1 00002810 PTL 00000002)
[ 0.003747] ACPI: DMI detected: Lenovo ThinkPad T430
[ 0.003750] ACPI: Local APIC address 0xfee00000
[ 0.003836] No NUMA configuration found
[ 0.003837] Faking a node at [mem 0x0000000000000000-0x000000031e5fffff]
[ 0.003847] NODE_DATA(0) allocated [mem 0x31e5ce000-0x31e5f8fff]
[ 0.004094] Zone ranges:
[ 0.004095] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.004096] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.004097] Normal [mem 0x0000000100000000-0x000000031e5fffff]
[ 0.004098] Device empty
[ 0.004098] Movable zone start for each node
[ 0.004102] Early memory node ranges
[ 0.004103] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.004104] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.004105] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.004105] node 0: [mem 0x0000000040005000-0x00000000cd513fff]
[ 0.004106] node 0: [mem 0x0000000100000000-0x000000031e5fffff]
[ 0.004275] Zeroed struct page in unavailable ranges: 18257 pages
[ 0.004277] Initmem setup node 0 [mem 0x0000000000001000-0x000000031e5fffff]
[ 0.004278] On node 0 totalpages: 3061935
[ 0.004279] DMA zone: 64 pages used for memmap
[ 0.004280] DMA zone: 21 pages reserved
[ 0.004281] DMA zone: 3996 pages, LIFO batch:0
[ 0.004335] DMA32 zone: 13069 pages used for memmap
[ 0.004335] DMA32 zone: 836371 pages, LIFO batch:63
[ 0.016037] Normal zone: 34712 pages used for memmap
[ 0.016039] Normal zone: 2221568 pages, LIFO batch:63
[ 0.043794] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff]
[ 0.044139] ACPI: PM-Timer IO Port: 0x408
[ 0.044141] ACPI: Local APIC address 0xfee00000
[ 0.044150] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.044151] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.044162] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.044164] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.044166] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.044168] ACPI: IRQ0 used by override.
[ 0.044169] ACPI: IRQ9 used by override.
[ 0.044171] Using ACPI (MADT) for SMP configuration information
[ 0.044172] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.044177] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.044197] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.044199] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.044199] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.044200] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.044200] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.044202] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.044203] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.044205] PM: Registered nosave memory: [mem 0xcd514000-0xdae9efff]
[ 0.044205] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff]
[ 0.044206] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[ 0.044206] PM: Registered nosave memory: [mem 0xdafff000-0xdf9fffff]
[ 0.044207] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.044208] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.044208] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.044209] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.044209] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.044210] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.044210] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.044211] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.044211] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.044212] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.044212] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.044213] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.044213] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.044214] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.044216] [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.044217] Booting paravirtualized kernel on bare hardware
[ 0.044219] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.044225] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.044489] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144
[ 0.044496] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152
[ 0.044497] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.044526] Built 1 zonelists, mobility grouping on. Total pages: 3014069
[ 0.044527] Policy zone: Normal
[ 0.044529] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.34-1-pve root=/dev/mapper/pve-root ro quiet usbcore.autosuspend=-1
[ 0.045477] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.045919] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.046010] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.049459] Calgary: detecting Calgary via BIOS EBDA area
[ 0.049461] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.080263] Memory: 11888452K/12247740K available (14339K kernel code, 2405K rwdata, 5076K rodata, 2712K init,
4984K bss, 359288K reserved, 0K cma-reserved)
[ 0.080269] random: get_random_u64 called from __kmem_cache_create+0x42/0x530 with crng_init=0
[ 0.080406] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.080418] Kernel/User page tables isolation: enabled
[ 0.080432] ftrace: allocating 45019 entries in 176 pages
[ 0.098622] rcu: Hierarchical RCU implementation.
[ 0.098623] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.098624] Tasks RCU enabled.
[ 0.098625] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.098626] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.101747] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.101968] random: crng done (trusting CPU's manufacturer)
[ 0.103260] Console: colour VGA+ 80x25
[ 0.103265] printk: console [tty0] enabled
[ 0.103281] ACPI: Core revision 20190816
[ 0.103438] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.103453] APIC: Switch to symmetric I/O mode setup
[ 0.103455] DMAR: Host address width 36
[ 0.103456] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.103460] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.103461] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.103464] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.103465] DMAR: RMRR base: 0x000000da477000 end: 0x000000da48dfff
[ 0.103465] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[ 0.103467] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.103468] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.103469] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.103921] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.103923] x2apic enabled
[ 0.103931] Switched APIC routing to cluster x2apic.
[ 0.104371] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.123453] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2564a130127, max_idle_ns: 440795242141 ns
[ 0.123459] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.29 BogoMIPS (lpj=10376580)
[ 0.123461] pid_max: default: 32768 minimum: 301
[ 0.123495] LSM: Security Framework initializing
[ 0.123506] Yama: becoming mindful.
[ 0.123546] AppArmor: AppArmor initialized
[ 0.123609] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.123641] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.123656] *** VALIDATE tmpfs ***
[ 0.123810] *** VALIDATE proc ***
[ 0.123864] *** VALIDATE cgroup1 ***
[ 0.123865] *** VALIDATE cgroup2 ***
[ 0.123916] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.123924] process: using mwait in idle threads
[ 0.123927] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.123927] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.123930] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.123932] Spectre V2 : Mitigation: Full generic retpoline
[ 0.123932] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.123933] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.123934] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.123935] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.123936] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.123939] MDS: Mitigation: Clear CPU buffers
[ 0.124119] Freeing SMP alternatives memory: 40K
[ 0.127545] TSC deadline timer enabled
[ 0.127548] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.127665] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.127671] ... version: 3
[ 0.127671] ... bit width: 48
[ 0.127672] ... generic registers: 4
[ 0.127672] ... value mask: 0000ffffffffffff
[ 0.127673] ... max period: 00007fffffffffff
[ 0.127673] ... fixed-purpose events: 3
[ 0.127674] ... event mask: 000000070000000f
[ 0.127709] rcu: Hierarchical SRCU implementation.
[ 0.128663] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.128751] smp: Bringing up secondary CPUs ...
[ 0.128854] x86: Booting SMP configuration:
[ 0.128855] .... node #0, CPUs: #1
[ 0.131176] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/
admin-guide/hw-vuln/mds.html for more details.
[ 0.131176] #2 #3
[ 0.135515] smp: Brought up 1 node, 4 CPUs
[ 0.135515] smpboot: Max logical packages: 2
[ 0.135515] smpboot: Total of 4 processors activated (20753.16 BogoMIPS)
[ 0.137138] devtmpfs: initialized
[ 0.137138] x86/mm: Memory block size: 128MB
[ 0.137138] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
[ 0.137138] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.137138] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.137138] pinctrl core: initialized pinctrl subsystem
[ 0.137138] PM: RTC time: 09:49:43, date: 2020-09-05
[ 0.137138] NET: Registered protocol family 16
[ 0.137138] audit: initializing netlink subsys (disabled)
[ 0.137138] audit: type=2000 audit(1599299382.032:1): state=initialized audit_enabled=0 res=1
[ 0.137138] EISA bus registered
[ 0.137138] cpuidle: using governor ladder
[ 0.137138] cpuidle: using governor menu
[ 0.137138] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.137138] ACPI: bus type PCI registered
[ 0.137138] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.137138] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.137138] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.137138] PCI: Using configuration type 1 for base access
[ 0.137138] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.139896] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.140963] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.143560] ACPI: Added _OSI(Module Device)
[ 0.143561] ACPI: Added _OSI(Processor Device)
[ 0.143562] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.143563] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.143564] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.143564] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.143565] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.143566] ACPI: Deleted _OSI(Windows 2012)
[ 0.158701] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.159405] ACPI: EC: EC started
[ 0.159406] ACPI: EC: interrupt blocked
[ 0.160271] ACPI: \: Used as first EC
[ 0.160272] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.160273] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.160555] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.164723] ACPI: Dynamic OEM Table Load:
[ 0.164730] ACPI: SSDT 0xFFFF941E4FD95C00 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.166415] ACPI: Interpreter enabled
[ 0.166436] ACPI: (supports S0 S3 S4 S5)
[ 0.166437] ACPI: Using IOAPIC for interrupt routing
[ 0.166462] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.166809] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.170784] ACPI: Power Resource [PUBS] (on)
[ 0.170930] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[ 0.171951] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[ 0.174858] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.174997] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.175130] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.175266] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.175403] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.175541] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.175678] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.175813] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.175911] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.175915] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.176103] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR]
[ 0.176190] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.176191] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.176193] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.176194] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.176394] PCI host bridge to bus 0000:00
[ 0.176396] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.176398] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.176399] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.176400] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
[ 0.176401] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[ 0.176402] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.176412] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.176501] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.176511] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.176516] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.176520] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
[ 0.176626] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.176650] pci 0000:00:14.0: reg 0x10: [mem 0xf2520000-0xf252ffff 64bit]
[ 0.176720] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.176806] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.176831] pci 0000:00:16.0: reg 0x10: [mem 0xf2535000-0xf253500f 64bit]
[ 0.176907] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.176984] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.177004] pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff]
[ 0.177012] pci 0000:00:19.0: reg 0x14: [mem 0xf253b000-0xf253bfff]
[ 0.177020] pci 0000:00:19.0: reg 0x18: [io 0x6080-0x609f]
[ 0.177080] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.177162] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.177184] pci 0000:00:1a.0: reg 0x10: [mem 0xf253a000-0xf253a3ff]
[ 0.177267] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.177353] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.177375] pci 0000:00:1b.0: reg 0x10: [mem 0xf2530000-0xf2533fff 64bit]
[ 0.177451] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.177543] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.177703] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.177816] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.177976] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.178087] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.178249] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.178360] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.178382] pci 0000:00:1d.0: reg 0x10: [mem 0xf2539000-0xf25393ff]
[ 0.178468] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.178556] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.178738] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.178755] pci 0000:00:1f.2: reg 0x10: [io 0x60a8-0x60af]
[ 0.178763] pci 0000:00:1f.2: reg 0x14: [io 0x60b4-0x60b7]
[ 0.178770] pci 0000:00:1f.2: reg 0x18: [io 0x60a0-0x60a7]
[ 0.178778] pci 0000:00:1f.2: reg 0x1c: [io 0x60b0-0x60b3]
[ 0.178785] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
[ 0.178793] pci 0000:00:1f.2: reg 0x24: [mem 0xf2538000-0xf25387ff]
[ 0.178835] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.178913] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.178932] pci 0000:00:1f.3: reg 0x10: [mem 0xf2534000-0xf25340ff 64bit]
[ 0.178953] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.179216] pci 0000:02:00.0: [1180:e822] type 00 class 0x088001
[ 0.179244] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.179281] pci 0000:02:00.0: reg 0x10: [mem 0xf1d00000-0xf1d000ff]
[ 0.179517] pci 0000:02:00.0: supports D1 D2
[ 0.179518] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.179882] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.179886] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.179890] pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff]
[ 0.179897] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.180102] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
[ 0.180343] pci 0000:03:00.0: reg 0x10: [mem 0xf1c00000-0xf1c01fff 64bit]
[ 0.181136] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.181585] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.181593] pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff]
[ 0.181693] acpiphp: Slot [1] registered
[ 0.181703] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.181707] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.181712] pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff]
[ 0.181719] pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.182812] ACPI: EC: interrupt unblocked
[ 0.182812] ACPI: EC: event unblocked
[ 0.182812] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.182812] ACPI: \_SB_.PCI0.LPC_.EC__: Boot DSDT EC used to handle transactions and events
[ 0.182818] iommu: Default domain type: Translated
[ 0.182818] SCSI subsystem initialized
[ 0.182818] libata version 3.00 loaded.
[ 0.182818] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.182818] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.182818] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.182818] vgaarb: loaded
[ 0.182818] ACPI: bus type USB registered
[ 0.182818] usbcore: registered new interface driver usbfs
[ 0.182818] usbcore: registered new interface driver hub
[ 0.182818] usbcore: registered new device driver usb
[ 0.182818] pps_core: LinuxPPS API ver. 1 registered
[ 0.182818] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.182818] PTP clock support registered
[ 0.182818] EDAC MC: Ver: 3.0.0
[ 0.183644] PCI: Using ACPI for IRQ routing
[ 0.185230] PCI: pci_cache_line_size set to 64 bytes
[ 0.185620] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.185621] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.185622] e820: reserve RAM buffer [mem 0xcd514000-0xcfffffff]
[ 0.185623] e820: reserve RAM buffer [mem 0x31e600000-0x31fffffff]
[ 0.185720] NetLabel: Initializing
[ 0.185721] NetLabel: domain hash size = 128
[ 0.185721] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.185735] NetLabel: unlabeled traffic allowed by default
[ 0.185750] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.185750] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.187461] clocksource: Switched to clocksource tsc-early
[ 0.199996] *** VALIDATE bpf ***
[ 0.200082] VFS: Disk quotas dquot_6.6.0
[ 0.200099] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.200123] *** VALIDATE ramfs ***
[ 0.200126] *** VALIDATE hugetlbfs ***
[ 0.200207] AppArmor: AppArmor Filesystem Enabled
[ 0.200237] pnp: PnP ACPI init
[ 0.200910] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.200912] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.200914] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.200915] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.200916] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.200917] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.200918] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.200920] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.200921] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.200922] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.200923] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.200924] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.200926] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.200927] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.200928] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[ 0.200930] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.200935] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.201087] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0
Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[ 0.201103] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.201105] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.201106] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.201107] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.201108] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.201110] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.201111] system 00:01: [mem 0xfffff000-0xffffffff] has been reserved
[ 0.201113] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.201115] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.201117] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.201118] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.201119] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.201120] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.201124] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.201183] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.201203] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.201222] pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.201821] pnp: PnP ACPI: found 5 devices
[ 0.203060] thermal_sys: Registered thermal governor 'fair_share'
[ 0.203061] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.203062] thermal_sys: Registered thermal governor 'step_wise'
[ 0.203062] thermal_sys: Registered thermal governor 'user_space'
[ 0.203063] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.207587] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.207626] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.207633] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.207639] pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff]
[ 0.207644] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.207652] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.207658] pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff]
[ 0.207669] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.207672] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.207678] pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff]
[ 0.207683] pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.207691] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.207692] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.207694] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.207695] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window]
[ 0.207696] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[ 0.207697] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.207698] pci_bus 0000:02: resource 1 [mem 0xf1d00000-0xf24fffff]
[ 0.207699] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.207700] pci_bus 0000:03: resource 1 [mem 0xf1c00000-0xf1cfffff]
[ 0.207701] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.207702] pci_bus 0000:04: resource 1 [mem 0xf1400000-0xf1bfffff]
[ 0.207703] pci_bus 0000:04: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.207809] NET: Registered protocol family 2
[ 0.207969] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.208049] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.208278] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.208360] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.208417] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.208461] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.208537] NET: Registered protocol family 1
[ 0.208543] NET: Registered protocol family 44
[ 0.208555] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.209106] PCI: CLS 64 bytes, default 64
-
Terramoto
- Posts: 8
- Joined: 02 Sep 2020, 16:15
Post
by Terramoto » 05 Sep 2020, 12:05
Code: Select all [ 0.858634] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.858637] ehci-pci: EHCI PCI platform driver
[ 0.858764] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.858771] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.858787] ehci-pci 0000:00:1a.0: debug port 2
[ 0.862704] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.862720] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf253a000
[ 0.875499] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.875567] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.875569] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.875570] usb usb1: Product: EHCI Host Controller
[ 0.875571] usb usb1: Manufacturer: Linux 5.4.34-1-pve ehci_hcd
[ 0.875572] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.875771] hub 1-0:1.0: USB hub found
[ 0.875778] hub 1-0:1.0: 3 ports detected
[ 0.876058] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.876066] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.876077] ehci-pci 0000:00:1d.0: debug port 2
[ 0.879973] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.879987] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2539000
[ 0.895498] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.895561] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.895562] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.895563] usb usb2: Product: EHCI Host Controller
[ 0.895564] usb usb2: Manufacturer: Linux 5.4.34-1-pve ehci_hcd
[ 0.895565] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.895747] hub 2-0:1.0: USB hub found
[ 0.895754] hub 2-0:1.0: 3 ports detected
[ 0.895919] ehci-platform: EHCI generic platform driver
[ 0.895930] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.895934] ohci-pci: OHCI PCI platform driver
[ 0.895944] ohci-platform: OHCI generic platform driver
[ 0.895950] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.896059] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.896064] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.897132] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[ 0.897137] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.897283] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.897284] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.897285] usb usb3: Product: xHCI Host Controller
[ 0.897286] usb usb3: Manufacturer: Linux 5.4.34-1-pve xhci-hcd
[ 0.897287] usb usb3: SerialNumber: 0000:00:14.0
[ 0.897463] hub 3-0:1.0: USB hub found
[ 0.897477] hub 3-0:1.0: 4 ports detected
[ 0.897997] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.898000] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.898003] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.898043] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.898044] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.898045] usb usb4: Product: xHCI Host Controller
[ 0.898046] usb usb4: Manufacturer: Linux 5.4.34-1-pve xhci-hcd
[ 0.898047] usb usb4: SerialNumber: 0000:00:14.0
[ 0.898229] hub 4-0:1.0: USB hub found
[ 0.898243] hub 4-0:1.0: 4 ports detected
...
[ 1.211492] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.231493] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 1.240490] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.240491] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.240787] hub 1-1:1.0: USB hub found
[ 1.240985] hub 1-1:1.0: 6 ports detected
[ 1.243467] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.253382] usb 3-2: New USB device found, idVendor=12d1, idProduct=1506, bcdDevice= 1.02
[ 1.253386] usb 3-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 1.253389] usb 3-2: Product: HUAWEI Mobile
[ 1.253391] usb 3-2: Manufacturer: HUAWEI Technology
[ 1.257501] usb-storage 3-2:1.2: USB Mass Storage device detected
[ 1.257593] scsi host6: usb-storage 3-2:1.2
[ 1.257681] usb-storage 3-2:1.3: USB Mass Storage device detected
[ 1.257761] scsi host7: usb-storage 3-2:1.3
[ 1.257823] usbcore: registered new interface driver usb-storage
[ 1.258080] usbcore: registered new interface driver uas
[ 1.272034] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.272035] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.272299] hub 2-1:1.0: USB hub found
[ 1.272379] hub 2-1:1.0: 8 ports detected
...
[ 1.387484] usb 3-4: new high-speed USB device number 3 using xhci_hcd
[ 1.410364] usb 3-4: New USB device found, idVendor=0bdb, idProduct=1926, bcdDevice= 0.00
[ 1.410368] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.410370] usb 3-4: Product: H5321 gw
[ 1.410372] usb 3-4: Manufacturer: Lenovo
[ 1.410374] usb 3-4: SerialNumber: E462F817FB5CA7M0
...
[ 1.527497] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 1.638075] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01
[ 1.638076] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.638077] usb 1-1.3: Product: Biometric Coprocessor
[ 1.638078] usb 1-1.3: Manufacturer: Auth
[ 1.715491] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[ 1.778043] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.822990] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[ 1.832903] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
[ 1.832905] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.832906] usb 1-1.4: Product: BCM20702A0
[ 1.832906] usb 1-1.4: Manufacturer: Broadcom Corp
[ 1.832907] usb 1-1.4: SerialNumber: 0C84DCDC9BB5
[ 1.867493] tsc: Refined TSC clocksource calibration: 2594.100 MHz
...
[ 1.911491] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[ 1.923143] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 1.948458] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2db, bcdDevice= 5.64
[ 1.948459] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.948460] usb 1-1.6: Product: Integrated Camera
[ 1.948461] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.090100] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.284662] scsi 7:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
[ 2.284921] sd 7:0:0:0: Attached scsi generic sg1 type 0
[ 2.285106] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 2.408667] sr 6:0:0:0: [sr0] scsi-1 drive
[ 2.408669] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.409217] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 2.435815] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 2.435884] sr 6:0:0:0: Attached scsi generic sg2 type 5
...
[ 3.397962] sr 6:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 3.397968] sr 6:0:0:0: [sr0] tag#0 Sense Key : Medium Error [current]
[ 3.397971] sr 6:0:0:0: [sr0] tag#0 Add. Sense: Unrecovered read error
[ 3.397975] sr 6:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 ff fc 00 00 02 00
[ 3.397981] blk_update_request: critical medium error, dev sr0, sector 262128 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 3.398086] attempt to access beyond end of device
[ 3.398088] sr0: rw=0, want=262136, limit=262128
[ 3.398089] Buffer I/O error on dev sr0, logical block 32766, async page read
[ 3.697929] sr 6:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 3.697931] sr 6:0:0:0: [sr0] tag#0 Sense Key : Medium Error [current]
[ 3.697933] sr 6:0:0:0: [sr0] tag#0 Add. Sense: Unrecovered read error
[ 3.697934] sr 6:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 fe 80 00 00 3c 00
[ 3.697936] blk_update_request: critical medium error, dev sr0, sector 260608 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0
[ 3.817924] sr 6:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 3.817926] sr 6:0:0:0: [sr0] tag#0 Sense Key : Medium Error [current]
[ 3.817927] sr 6:0:0:0: [sr0] tag#0 Add. Sense: Unrecovered read error
[ 3.817929] sr 6:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 fe 80 00 00 02 00
[ 3.817930] blk_update_request: critical medium error, dev sr0, sector 260608 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 3.817967] Buffer I/O error on dev sr0, logical block 32576, async page read
[ 3.937960] sr 6:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 3.937962] sr 6:0:0:0: [sr0] tag#0 Sense Key : Medium Error [current]
[ 3.937963] sr 6:0:0:0: [sr0] tag#0 Add. Sense: Unrecovered read error
[ 3.937965] sr 6:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 ff fa 00 00 02 00
[ 3.937967] blk_update_request: critical medium error, dev sr0, sector 262120 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 3.938013] attempt to access beyond end of device
[ 3.938015] sr0: rw=0, want=262128, limit=262120
[ 3.938016] Buffer I/O error on dev sr0, logical block 32765, async page read
...
[ 5.422925] usbcore: registered new interface driver usbserial_generic
[ 5.422932] usbserial: USB Serial support registered for generic
[ 5.436454] cdc_wdm 3-4:1.5: cdc-wdm0: USB WDM device
[ 5.436520] cdc_wdm 3-4:1.8: cdc-wdm1: USB WDM device
[ 5.437233] usbcore: registered new interface driver cdc_wdm
[ 5.437292] cdc_acm 3-4:1.1: ttyACM0: USB ACM device
[ 5.438443] Non-volatile memory driver v1.3
[ 5.438854] usbcore: registered new interface driver cdc_ncm
[ 5.438903] cdc_acm 3-4:1.3: ttyACM1: USB ACM device
[ 5.440501] cdc_acm 3-4:1.9: ttyACM2: USB ACM device
[ 5.443422] usbcore: registered new interface driver option
[ 5.443430] usbserial: USB Serial support registered for GSM modem (1-port)
...
[ 5.541698] usbcore: registered new interface driver cdc_acm
[ 5.541700] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 5.545205] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 5.545208] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 5.545209] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 5.545211] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 5.545306] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8
[ 5.545395] usbcore: registered new interface driver uvcvideo
[ 5.545396] USB Video Class driver (1.1.1)
[ 5.545451] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 5.553345] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 5.571063] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 5.571066] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 5.571067] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 5.571069] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 5.605176] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 5.646036] Bluetooth: hci0: BCM: chip id 63
[ 5.647120] Bluetooth: hci0: BCM: features 0x07
[ 5.663211] Bluetooth: hci0: BCM20702A
[ 5.665118] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 5.667143] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 5.667147] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 5.671792] huawei_cdc_ncm 3-2:1.1: MAC-Address: 0c:5b:8f:27:9a:64
[ 5.671795] huawei_cdc_ncm 3-2:1.1: setting rx_max = 16384
[ 5.672380] cdc_mbim 3-4:1.6: cdc-wdm2: USB WDM device
[ 5.672589] cdc_mbim 3-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, b2:af:ca:32:dd:08
[ 5.672635] usbcore: registered new interface driver cdc_mbim
[ 5.695492] huawei_cdc_ncm 3-2:1.1: setting tx_max = 16384
[ 5.696032] huawei_cdc_ncm 3-2:1.1: NDP will be placed at end of frame for this device.
[ 5.696487] huawei_cdc_ncm 3-2:1.1: cdc-wdm3: USB WDM device
[ 5.696694] huawei_cdc_ncm 3-2:1.1 wwan1: register 'huawei_cdc_ncm' at usb-0000:00:14.0-2, Huawei CDC NCM device, 0c:5b:8f:27:9a:64
[ 5.696750] usbcore: registered new interface driver huawei_cdc_ncm
[ 5.696954] option 3-2:1.0: GSM modem (1-port) converter detected
[ 5.697187] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB0
...
[ 5.971951] cdc_mbim 3-4:1.6 wwp0s20u4i6: renamed from wwan0
[ 6.009759] fbcon: i915drmfb (fb0) is primary device
[ 6.076253] huawei_cdc_ncm 3-2:1.1 wwx0c5b8f279a64: renamed from wwan1
[ 6.187591] Adding 8388604k swap on /dev/mapper/pve-swap. Priority:-2 extents:1 across:8388604k SSFS
[ 6.197776] sr 6:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 6.197779] sr 6:0:0:0: [sr0] tag#0 Sense Key : Medium Error [current]
[ 6.197782] sr 6:0:0:0: [sr0] tag#0 Add. Sense: Unrecovered read error
[ 6.197785] sr 6:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 ff f6 00 00 02 00
[ 6.197789] blk_update_request: critical medium error, dev sr0, sector 262104 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 6.197968] attempt to access beyond end of device
[ 6.197970] sr0: rw=0, want=262112, limit=262104
[ 6.197973] Buffer I/O error on dev sr0, logical block 32763, async page read
[ 6.293006] ZFS: Loaded module v0.8.3-pve1, ZFS pool version 5000, ZFS filesystem version 5
[ 6.351940] intel_rapl_common: Found RAPL domain package
[ 6.351941] intel_rapl_common: Found RAPL domain core
[ 6.351941] intel_rapl_common: Found RAPL domain uncore
[ 6.351949] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 6.377914] sr 6:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 6.377916] sr 6:0:0:0: [sr0] tag#0 Sense Key : Medium Error [current]
[ 6.377917] sr 6:0:0:0: [sr0] tag#0 Add. Sense: Unrecovered read error
[ 6.377919] sr 6:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 fe 80 00 00 3c 00
[ 6.377922] blk_update_request: critical medium error, dev sr0, sector 260608 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 0
[ 6.497850] sr 6:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 6.497854] sr 6:0:0:0: [sr0] tag#0 Sense Key : Medium Error [current]
[ 6.497857] sr 6:0:0:0: [sr0] tag#0 Add. Sense: Unrecovered read error
[ 6.497861] sr 6:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 fe 80 00 00 02 00
[ 6.497865] blk_update_request: critical medium error, dev sr0, sector 260608 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 6.497869] Buffer I/O error on dev sr0, logical block 32576, async page read
[ 6.617849] sr 6:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 6.617853] sr 6:0:0:0: [sr0] tag#0 Sense Key : Medium Error [current]
[ 6.617856] sr 6:0:0:0: [sr0] tag#0 Add. Sense: Unrecovered read error
[ 6.617860] sr 6:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 ff f4 00 00 02 00
[ 6.617865] blk_update_request: critical medium error, dev sr0, sector 262096 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 6.617924] attempt to access beyond end of device
[ 6.617926] sr0: rw=0, want=262104, limit=262096
[ 6.617928] Buffer I/O error on dev sr0, logical block 32762, async page read
...
[ 24.300786] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 24.300806] option 3-2:1.0: device disconnected
[ 24.300889] huawei_cdc_ncm 3-2:1.1 wwx0c5b8f279a64: unregister 'huawei_cdc_ncm' usb-0000:00:14.0-2, Huawei CDC NCM device
ah, i see now the device is supposedly disconnected but the usb-devices/lsusb is still detecting it. After running a usbreset 12d1:1506 it comes back.
Sorry the post limit was not allowing me to post it all together i had to split it.
-
Josh
- Site Admin
- Posts: 6570
- Joined: 03 Nov 2007, 00:30
Post
by Josh » 05 Sep 2020, 18:44
Hmm, the network interface seems to be set up nicely during boot. Not sure what the problem is.
It's correctly detected as a NCM device with Huawei-specific flavour, and a network interface is created (see last line in excerpt).
Code: Select all [ 5.671792] huawei_cdc_ncm 3-2:1.1: MAC-Address: 0c:5b:8f:27:9a:64
[ 5.671795] huawei_cdc_ncm 3-2:1.1: setting rx_max = 16384
[ 5.672380] cdc_mbim 3-4:1.6: cdc-wdm2: USB WDM device
[ 5.672589] cdc_mbim 3-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, b2:af:ca:32:dd:08
[ 5.672635] usbcore: registered new interface driver cdc_mbim
[ 5.695492] huawei_cdc_ncm 3-2:1.1: setting tx_max = 16384
[ 5.696032] huawei_cdc_ncm 3-2:1.1: NDP will be placed at end of frame for this device.
[ 5.696487] huawei_cdc_ncm 3-2:1.1: cdc-wdm3: USB WDM device
[ 5.696694] huawei_cdc_ncm 3-2:1.1 wwan1: register 'huawei_cdc_ncm' at usb-0000:00:14.0-2, Huawei CDC NCM device, 0c:5b:8f:27:9a:64
[ 5.696750] usbcore: registered new interface driver huawei_cdc_ncm
[ 5.696954] option 3-2:1.0: GSM modem (1-port) converter detected
[ 5.697187] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB0
...
[ 5.971951] cdc_mbim 3-4:1.6 wwp0s20u4i6: renamed from wwan0
[ 6.009759] fbcon: i915drmfb (fb0) is primary device
[ 6.076253] huawei_cdc_ncm 3-2:1.1 wwx0c5b8f279a64: renamed from wwan1
However, starting the connection is sort of a hybrid process. It uses AT commands that are either transmitted through a serial port (bulk transfer) if available or as control transfer to the first endpoint of the network port union. The latter is exposed by the driver, in your case /dev/cdc-wdm3.
Only after the connection is enabled by the AT command (AT^NDISDUP), the DHCP request can be started.
Reasonably current versions of Network Manager know how to handle this, but it's not hard to create DIY scripts that can do the same.
-
Terramoto
- Posts: 8
- Joined: 02 Sep 2020, 16:15
Post
by Terramoto » 06 Sep 2020, 01:22
Hey!
I think i just found the cause of the problem, i setup proxmox on this system and i'm trying to hook all the network to a PFSense VM. the modem was setup as well and i think the KVM kept attaching it as a storage device causing the device to stop working as a network device. I notice this because i rmmod usb-storage and went to check dmesg there was several msgs from kvm about not being a ble to work with the device. I then stopped the VM and rebooted, the modem is now working properly
-
LOM
- Posts: 1404
- Joined: 11 Jul 2012, 15:14
- Location: Koh Samui, TH
Post
by LOM » 06 Sep 2020, 03:21
Terramoto wrote: ↑05 Sep 2020, 12:05
Code: Select all [ 5.671792] huawei_cdc_ncm 3-2:1.1: MAC-Address: 0c:5b:8f:27:9a:64
[ 5.671795] huawei_cdc_ncm 3-2:1.1: setting rx_max = 16384
[ 5.672380] cdc_mbim 3-4:1.6: cdc-wdm2: USB WDM device
[ 5.672589] cdc_mbim 3-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, b2:af:ca:32:dd:08
[ 5.672635] usbcore: registered new interface driver cdc_mbim
[ 5.695492] huawei_cdc_ncm 3-2:1.1: setting tx_max = 16384
[ 5.696032] huawei_cdc_ncm 3-2:1.1: NDP will be placed at end of frame for this device.
[ 5.696487] huawei_cdc_ncm 3-2:1.1: cdc-wdm3: USB WDM device
[ 5.696694] huawei_cdc_ncm 3-2:1.1 wwan1: register 'huawei_cdc_ncm' at usb-0000:00:14.0-2, Huawei CDC NCM device, 0c:5b:8f:27:9a:64
Here is an indication of something very wrong, reboot doesn't start your system from scratch. Your built-in Ericson modem is assigned cdc-wdm2 and the Huawei modem cdc-wdm3 and this can only be because cdc-wdm0 and cdc-wdm1 are already in use.
How can they be in use after a kernel start from scratch?
Terramoto wrote: ↑05 Sep 2020, 12:05
ah, i see now the device is supposedly disconnected but the usb-devices/lsusb is still detecting it. After running a usbreset 12d1:1506 it comes back.
You have found a workaround, I can't help you further. This is way above my paygrade and not usb_modeswitch related.
Edit: Didn't see your last post before I made this one, proxmox is surely the reason for the strange behavior.
It explains why you got usbfs as driver, this only happens when the driver is not a kernel driver but is a userspace driver.
|
|
