Hi all,
I'm new. Thanks to your work I'm using the old 3G dongle MA180 in an arduino yun device.
It works perfectly but once it is connected through the ttyUSB2 I cannot send AT commands to check for example the signal strength or to send/read sms.
After using modem switch it create four ttys, do you know if can I use other configurations dislike mine to have the possibility to read/send sms while connected?
Thanks
Barbaro
Re: Ma180 3g dongle - at commands during connected
You can only try to send AT commands to one of the other ttyUSB ports. Sometimes they provide a DIAG port where you can do all of what you listed.
From Linux, try the "minicom" application - example:
minicom -D /dev/ttyUsb1
From Linux, try the "minicom" application - example:
minicom -D /dev/ttyUsb1