[danjde]

OK, I will follow your suggestions,

For detach the modem functionality and access (I hope and I will report to you..) to the microsd Is it automatic when I disconnect the phone or must I run a shell command?

Many thanks again!

[danjde]

I've edit 12d1:101e as your,
repackaged /usr/share/usb_modeswitch/configPack.tar.gz
restart computer
plugged the phone
so, the "ttyUSB0" and "ttyUSB0" are not seen
and dmesg hang:

Code: Select all

[  638.047739] usb 1-3: USB disconnect, device number 2
[  643.216104] usb 1-3: new high-speed USB device number 3 using ehci-pci
[  643.352053] usb 1-3: New USB device found, idVendor=12d1, idProduct=101e
[  643.352065] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[  643.352071] usb 1-3: Product: HUAWEI MOBILE
[  643.352077] usb 1-3: Manufacturer: Huawei Technologies
[  643.356355] usb-storage 1-3:1.0: USB Mass Storage device detected
[  643.356948] scsi3 : usb-storage 1-3:1.0
[  644.358278] scsi 3:0:0:0: CD-ROM            Huawei T Mass Storage     2.31 PQ: 0 ANSI: 2
[  644.373418] sr1: scsi-1 drive
[  644.373860] sr 3:0:0:0: Attached scsi CD-ROM sr1
[  644.374338] sr 3:0:0:0: Attached scsi generic sg4 type 5
[  644.579087] init: usb-modeswitch-upstart main process (2282) terminated with status 1

I've seen this post: http://forum.ubuntu-it.org/viewtopic.ph ... d&start=20
for udev rules the indications are usable?

many thanks

[danjde]

Hi friends,
Could you suggest me how is it possible to enable mass-storage on this device?
Normally I can see only the device that contains windows executable and I don't understand how switch for access to the device containing the image photo.

Many many thanks