I have added in /etc/usb_modeswitch.d/
Code: Select all
# ZTE MF 710M
DefaultVendor= 0x19d2
DefaultProduct= 0x1405
TargetVendor= 0x19d2
TargetProduct= 0x1405
MessageContent="55534243123456780000000000000011062000000000000100000000000000"
NeedResponse=0
I have tried with modprobe, sakis3g.
lsusb
Code: Select all
Bus 001 Device 003: ID 19d2:1405 ZTE WCDMA Technologies MSM
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 13ba:0018 PCPlay Barcode PCP-BCG4209
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Code: Select all
USB_ModeSwitch log from Sun Jan 11 15:21:55 2015
Use global config file: /etc/usb_modeswitch.conf
Started via upstart
Raw args from udev: /1-7
Bus ID for device not given by udev.
Trying to determine it from kernel name (1-7) ...
Use top device dir /sys/bus/usb/devices/1-7
USB dir exists: /sys/bus/usb/devices/1-7
SCSI dir exists: /sys/bus/usb/devices/1-7
Warning: SCSI attribute "vendor" not readable.
Warning: SCSI attribute "model" not readable.
Warning: SCSI attribute "rev" not readable.
Use interface /sys/bus/usb/devices/1-7/1-7:1.0
----------------
USB values from sysfs:
idVendor 19d2
idProduct 1405
manufacturer ZTE,Incorporated
product ZTE Mobile Broadband Station
serial 1234567890ABCDEF
bNumConfigurations 1
bConfigurationValue 1
devnum 3
busnum 1
----------------
bNumConfigurations is 1 - don't check for active configuration
Found packed config collection /usr/share/usb_modeswitch/configPack.tar.gz
Searching entries named: /usr/share/usb_modeswitch/19d2:1405*
Searching overriding entries named: /etc/usb_modeswitch.d/19d2:1405*
SCSI attributes not needed, move on.
Use overriden config 19d2:1405 from collection /etc/usb_modeswitch.d
config: TargetVendor set to 19d2
config: TargetProduct set to 1405
Driver module is "option", ID path is /sys/bus/usb-serial/drivers/option1
! matched, now switching
Command to be run:
/usr/sbin/usb_modeswitch -W -D -s 20 -c /etc/usb_modeswitch.d/19d2:1405 -u -1 -b 1 -g 3 -v 19d2 -p 1405 2>&1
Verbose debug output of usb_modeswitch and libusb follows
(Note that some USB errors are expected in the process)
--------------------------------
Read config file: /etc/usb_modeswitch.d/19d2:1405
* usb_modeswitch: handle USB devices with multiple modes
* Version 2.2.0 (C) Josua Dietze 2014
* Based on libusb1/libusbx
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x19d2
DefaultProduct= 0x1405
TargetVendor= 0x19d2
TargetProduct= 0x1405
MessageContent="55534243123456780000000000000011062000000000000100000000000000"
NeedResponse=0
Success check enabled, max. wait time 20 seconds
System integration mode enabled
Use given bus/device number: 001/003 ...
Look for default devices ...
bus/device number matched
found USB ID 19d2:1405
vendor ID matched
product ID matched
Found devices in default mode (1)
Use interface number 0
--------------------------------
(end of usb_modeswitch output)
USB dir exists: /sys/bus/usb/devices/1-7
All done, exit
Code: Select all
Bus 001 Device 004: ID 19d2:1405 ZTE WCDMA Technologies MSM
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x19d2 ZTE WCDMA Technologies MSM
idProduct 0x1405
bcdDevice 50.54
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 111
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 500mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 2 Communications
bFunctionSubClass 6 Ethernet Networking
bFunctionProtocol 0
iFunction 6
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 6 Ethernet Networking
bInterfaceProtocol 0
iInterface 4
CDC Header:
bcdCDC 1.10
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC Ethernet:
iMacAddress 7 (??)
bmEthernetStatistics 0x00000000
wMaxSegmentSize 1514
wNumberMCFilters 0x0000
bNumberPowerFilters 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 9
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 8
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Code: Select all
[ 1.929442] usb 1-7: unable to read config index 2 descriptor/start: -32
[ 1.761783] usb 1-7: chopping to 2 config(s)
[ 1.788237] usb 1-7: New USB device found, idVendor=19d2, idProduct=1225
[ 1.788240] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 1.788244] usb 1-7: Product: ZTE Mobile Broadband Station
[ 1.788246] usb 1-7: Manufacturer: ZTE,Incorporated
[ 1.800492] usb 1-7: can't set config #1, error -71
[ 1.928097] usb 1-7: USB disconnect, device number 3
[ 2.168058] usb 1-7: new high-speed USB device number 4 using ehci-pci
[ 2.301424] usb 1-7: New USB device found, idVendor=19d2, idProduct=1405
[ 2.301427] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.301430] usb 1-7: Product: ZTE Mobile Broadband Station
[ 2.301433] usb 1-7: Manufacturer: ZTE,Incorporated
[ 2.301436] usb 1-7: SerialNumber: 1234567890ABCDEF
[ 2.316506] usb-storage 1-7:1.2: USB Mass Storage device detected
[ 2.316735] scsi host6: usb-storage 1-7:1.2
[ 2.316925] usbcore: registered new interface driver usb-storage
[ 2.323987] usbcore: registered new interface driver uas
And i can't find no information about this model on internet.
Can someone help me with this specific modem?