I really hope someone might be able to help here with setting up a Huawei E352s-2 - I think I'm over complicating this as to me it should almost work "out the box" - But I'm clearly wrong or missing something - The challenge is my OS is Tiny Core (The Raspberry Pi flavour piCore)
Code: Select all
snb@snb:~$ version
13.0.3
Code: Select all
snb@snb:~$ uname -a
Linux snb 5.10.16-piCore-v7 #1 SMP Tue Feb 16 19:08:42 UTC 2021 armv7l GNU/Linux
Code: Select all
Bus 001 Device 010: ID 12d1:14fe Huawei Technologies Co., Ltd. Modem (Mass Storage Mode)
Code: Select all
[ 8353.044710] usb 1-1.3: new high-speed USB device number 10 using dwc_otg
[ 8353.175783] usb 1-1.3: New USB device found, idVendor=12d1, idProduct=14fe, bcdDevice= 1.02
[ 8353.175809] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 8353.175824] usb 1-1.3: Product: HUAWEI Mobile
[ 8353.175839] usb 1-1.3: Manufacturer: HUAWEI
[ 8353.178447] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 8353.179443] scsi host0: usb-storage 1-1.3:1.0
[ 8353.180229] usb-storage 1-1.3:1.1: USB Mass Storage device detected
[ 8353.181396] scsi host1: usb-storage 1-1.3:1.1
[ 8354.235572] scsi 1:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 8354.237531] scsi 0:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
Code: Select all
sudo usb_modeswitch -v 12d1 -p 14fe -c /home/snb/update_skynetwork/log/modswitch_gsm
Code: Select all
TargetVendor= 0x12d1
TargetProductList="14db,14dc"
HuaweiNewMode=1
MessageContent="55534243123456780000000000000a11062000000000000100000000000000"
NoDriverLoading=1
Code: Select all
Bus 001 Device 011: ID 12d1:1506 Huawei Technologies Co., Ltd. Modem/Networkcard
Code: Select all
[ 8464.414696] usb 1-1.3: new high-speed USB device number 11 using dwc_otg
[ 8464.546122] usb 1-1.3: New USB device found, idVendor=12d1, idProduct=1506, bcdDevice= 1.02
[ 8464.546147] usb 1-1.3: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 8464.546162] usb 1-1.3: Product: HUAWEI Mobile
[ 8464.546177] usb 1-1.3: Manufacturer: HUAWEI
[ 8464.548616] option 1-1.3:1.0: GSM modem (1-port) converter detected
[ 8464.549242] usb 1-1.3: GSM modem (1-port) converter now attached to ttyUSB0
[ 8464.550057] option 1-1.3:1.1: GSM modem (1-port) converter detected
[ 8464.550599] option 1-1.3:1.2: GSM modem (1-port) converter detected
[ 8464.551698] usb 1-1.3: GSM modem (1-port) converter now attached to ttyUSB2
[ 8464.552321] option 1-1.3:1.3: GSM modem (1-port) converter detected
[ 8464.553150] usb 1-1.3: GSM modem (1-port) converter now attached to ttyUSB3
[ 8464.554146] usb-storage 1-1.3:1.4: USB Mass Storage device detected
[ 8464.555793] scsi host0: usb-storage 1-1.3:1.4
[ 8464.556660] usb-storage 1-1.3:1.5: USB Mass Storage device detected
[ 8464.557351] scsi host1: usb-storage 1-1.3:1.5
[ 8465.595868] scsi 1:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 8465.596540] scsi 0:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 8465.636326] sd 1:0:0:0: [sda] Attached SCSI removable disk
It seems with a certain config at some point :
Code: Select all
MessageContent="55534243123456780000000000000011063000000100010000000000000000"
I'm not familiar with how to set this up at all as been in circles now for a few days - ANY help is greatly appreciated.
Many Thanks
Dean