[diogom]

I'm in Brazil, using a Nexus 7, Jelly Bean, and Huawei E303. Everything look great, but I'm getting the COULD NO DETERMINE THE LOCAL IP ADDRESS.

I did a lot of research befor send you this message ( xda, google, your forum). I've tried to NOIPDEFAULT (in gprs file). But did not work.

Do you have any guess about that ? Please find below the log file.

Regards,
Diogo

------------------------------- log ---------------------
OK
OK

OK

CONNECT
Report from chat:  Sep 28 17:26:25 CONNECT
Serial connection established.
using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/ttyUSB0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x285b926a>]
rcvd [LCP ConfReq id=0x1 <accomp> <pcomp> <asyncmap 0x0> <mru 1500> <magic 0x547> <auth chap MD5>]
sent [LCP ConfRej id=0x1 <accomp> <pcomp>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x285b926a>]
rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <mru 1500> <magic 0x547> <auth chap MD5>]
sent [LCP ConfAck id=0x2 <asyncmap 0x0> <mru 1500> <magic 0x547> <auth chap MD5>]
rcvd [CHAP Challenge id=0x1 <0cc065d1e26c618b4391bd074c2db1f2>, name = "HUAWEI_CHAP_SRVR"]
sent [CHAP Response id=0x1 <542e5501b1decf44add7b630b72535b6>, name = "vivo"]
rcvd [CHAP Success id=0x1 "Welcome!!"]
CHAP authentication succeeded: Welcome!!
CHAP authentication succeeded
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfReq id=0x1]
sent [IPCP ConfNak id=0x1 <addr 0.0.0.0>]
rcvd [IPCP ConfNak id=0x1 <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfReq id=0x2]
sent [IPCP ConfAck id=0x2]
rcvd [IPCP ConfNak id=0x2 <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
sent [IPCP ConfReq id=0x3 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfNak id=0x3 <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
sent [IPCP ConfReq id=0x4 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfReq id=0x3]
sent [IPCP ConfAck id=0x3]
rcvd [IPCP ConfNak id=0x4 <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
sent [IPCP ConfReq id=0x5 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfNak id=0x5 <addr 177.170.30.43> <ms-dns1 200.142.132.32> <ms-dns3 200.220.227.57>]
sent [IPCP ConfReq id=0x6]
rcvd [IPCP ConfAck id=0x6]
Could not determine local IP address
Connect time 0.1 minutes.
Sent 132 bytes, received 102 bytes.
sent [IPCP TermReq id=0x7 "Could not determine local IP address"]
rcvd [IPCP TermAck id=0x7]
sent [LCP TermReq id=0x2 "No network protocols running"]
rcvd [LCP TermAck id=0x2]
Connection terminated

[Josh]

Can you double-check your APN? What is your provider?

This error points to an incorrect setting.

[diogom]

Can you double-check your APN? What is your provider?

This error points to an incorrect setting.

Josh,
Yes, I'm pretty sure about the APN settings.

zap.vivo.com.br
user : vivo
Pass : vivo

It's the same I use in my android mobile phone.
Do you have any other guess ?

[Josh]

Not really.

Is the device probably locked to a different provider or plan, not fitting the SIM card?

Everything else seems to work, there is a response on the other side.

[diogom]

the device, simcard and plano are from the same Carrier vivo.
I really have no idea....

[Josh]

Try to find a system (Windows or Linux) where the connection with the device succeeds.

Then get a log of the dial process to see if there are any special initializations done apart from setting the APN.

[mohameddddd]

Josh, i used to get this error with Huawei. This was first thing that make me think the tool is saving the network settings somewhere and cannot change it when using another modem, this was before i find it is related to using more than a modem.
You later corrected this, to be related to the used ports.

I think this issue will be fixed in v1.1 as you said, but for now, if diogom can do one of the following methods it will prove/decline the idea.

Method 1:
1- Unplug the modem
2- remove the widget from desktop.
3- Add the widget to desktop
4- Enter necessary apn settings.
5- "Touch icon" and use "None"
6- Plug the modem.
7- "Touch Icon" and choose your modem.
I hope it will connect now successfully.

Method2:
1- Uninstall PPP widget from "Settings" > "App"
2- Re-install PPP.
3- Enter the APN settings
4- Plug the modem.
5- Connect.

Hope it works

Mohamed.

[Josh]

Ah, thanks for the hint.

The "wrong port" problem should really go away with version 1.1.

Only few hours to go now ...

[diogom]

Ah, thanks for the hint.

The "wrong port" problem should really go away with version 1.1.

Only few hours to go now ...

Thak you all for the hints, I tried both, but neither work.
And now I'm using version 1.1.

[Josh]

Do you still get the log saying "Could not determine local IP address" ?

The strange thing is that you do get an address ...

rcvd [IPCP ConfNak id=0x5 <addr 177.170.30.43> <ms-dns1 200.142.132.32> <ms-dns3 200.220.227.57>]

I'll look around if there is a parameter for the pppd option file ("<sdcard>/pppwidget/ppp/gprs") that can help.

[Josh]

I found something that seems to have been changed in a newer version of the pppd program ...

Add these lines to the file "<sdcard>/pppwidget/ppp/gprs":

ipcp-max-configure 50
ipcp-max-failure 50
ipcp-max-terminate 10

[anandzadbuke]

Hi there did you get the work around for this issue, even I am stuck for long, help if are done with it.

[sukimartin]

Hi there did you get the work around for this issue, even I am stuck for long, dream about snakes help if are done with it. 1212 meaning

Same here.."<sdcard>/pppwidget/ppp/gprs": did not work for me..

[hipohaha]

Do you still get the log saying "Could not determine local IP address" ?

The strange thing is that you do get an address ...

rcvd [IPCP ConfNak id=0x5 <addr 177.170.30.43> <ms-dns1 200.142.132.32> <ms-dns3 200.220.227.57>]paper minecraft

I'll look around if there is a parameter for the pppd option file ("<sdcard>/pppwidget/ppp/gprs") that can help.

Me too. Help