| |
Activation Codes and Methods, Hardware Details, Sniffing
-
sluckau
- Posts: 2
- Joined: 07 Mar 2010, 23:34
Post
by sluckau » 08 Mar 2010, 00:49
Hello,
I'm trying to get a the UMTS Card "web'n'walk expresscard V" (with USB ID: 0af0:7381) running under OpenSuse 11.1 with kernel 2.6.27.45-0.1-pae.
I have deinstalled the old usb-modeswitch version 0.9.x, because of the card with usb id 0af0:7381 has been detected as zeroCD at first time.
Then I have installed the current version according to the instruction:
http://www.draisberghof.de/usb_modeswit ... ml#install
usb-modeswitch-1.1.0, usb-modeswitch-data package and /etc/usb_modeswitch.conf
Following libusb packages are installed on my system:
Code: Select all libusb-0_1-4-0.1.12-139.1.1
libusbpp-0_1-4-0.1.12-139.1.1
libusb-1_0-devel-0.9.3-4.20
libusb-devel-0.1.12-139.1.1
libusb-1_0-0-0.9.3-4.20
libusb-0_1-5-0.99.9.2-7.6
libusb-1_0-debuginfo-0.9.3-4.20
libusb-1_0-debugsource-0.9.3-4.20
After plugging the card will be detected as "Globetrotter HSUPA Modem" by Manufacturer: "Option N.V." and listed:
lsusb|grep "0af0:7381"
Code: Select all Bus 001 Device 016: ID 0af0:7381 Option
But no ttyUSB device has been created. And couldn't be found in "ls /dev/ttyUSB*".
The messages logfile "/var/log/messages" shows the card has been detected successfully and usb-modeswitch has switching 0af0:7381 (Option N.V.: Globetrotter HSUPA Modem):
Code: Select all Mar 7 22:54:01 linux-slu kernel: usb 1-2: new high speed USB device using ehci_hcd and address 15
Mar 7 22:54:01 linux-slu kernel: usb 1-2: configuration #1 chosen from 1 choice
Mar 7 22:54:01 linux-slu kernel: scsi8 : SCSI emulation for USB Mass Storage devices
Mar 7 22:54:01 linux-slu kernel: usb 1-2: New USB device found, idVendor=0af0, idProduct=7381
Mar 7 22:54:01 linux-slu kernel: usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
Mar 7 22:54:01 linux-slu kernel: usb 1-2: Product: Globetrotter HSUPA Modem
Mar 7 22:54:01 linux-slu kernel: usb 1-2: Manufacturer: Option N.V.
Mar 7 22:54:01 linux-slu kernel: usb 1-2: SerialNumber: Serial Number
Mar 7 22:54:01 linux-slu kernel: usb-storage: device found at 15
Mar 7 22:54:01 linux-slu kernel: usb-storage: waiting for device to settle before scanning
Mar 7 22:54:01 linux-slu usb-modeswitch: switching 0af0:7381 (Option N.V.: Globetrotter HSUPA Modem)
Therefore I had a look into "/var/log/usb_modeswitch_1-2:1.0" after I have changed /lib/udev/usb_modeswitch to enable logging. The card has been detected successfully and it looks like I have correctly installed usb-modeswitch-1.1.0, but nevertheless mode switch has failed:
Code: Select all USB_ModeSwitch log from Sun Mar 07 22:54:01 CET 2010
raw args from udev: /1-2:1.0 {}
Bus ID for device not given by udev.
Trying to determine it from kernel name (1-2:1.0) ...
USB dir exists: /sys/bus/usb/devices/1-2
----------------
USB values from sysfs:
manufacturer Option N.V.
product Globetrotter HSUPA Modem
serial Serial Number
----------------
SCSI attributes not needed, moving on
checking config: /etc/usb_modeswitch.d/0af0:7381
! matched, now switching
(running command: /usr/sbin/usb_modeswitch -I -W -c /etc/usb_modeswitch.d/0af0:7381)
verbose output of usb_modeswitch:
--------------------------------
usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found 006
usb_os_find_busses: Found 005
usb_os_find_busses: Found 004
usb_os_find_busses: Found 003
usb_os_find_busses: Found 008
usb_os_find_busses: Found 007
usb_os_find_busses: Found 002
usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 006
usb_os_find_devices: Found 001 on 005
usb_os_find_devices: Found 003 on 004
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 002 on 004
usb_os_find_devices: Found 001 on 004
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 003
usb_os_find_devices: Found 001 on 008
usb_os_find_devices: Found 001 on 007
usb_os_find_devices: Found 002 on 002
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 002
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 015 on 001
usb_os_find_devices: Found 004 on 001
skipping descriptor 0xB
skipped 1 class/vendor specific endpoint descriptors
skipped 5 class/vendor specific interface descriptors
skipping descriptor 0x25
skipped 1 class/vendor specific endpoint descriptors
skipped 9 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
Reading config file: /etc/usb_modeswitch.d/0af0:7381
* usb-modeswitch: handle USB devices with multiple modes
* Version 1.1.0 (C) Josua Dietze 2010
* Based on libusb 0.1.12
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x0af0
DefaultProduct= 0x7381
TargetVendor= not set
TargetProduct= not set
TargetClass= 0xff
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
GCTMode=0
MessageEndpoint= not set
MessageContent="55534243785634120100000080000601000000000000000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
Interface=0x00
InquireDevice disabled
Success check enabled, max. wait time 10 seconds
System integration mode enabled
Looking for target devices ...
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0a5c:2145
searching devices, found USB ID 08ff:2810
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0bdb:1900
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0af0:7381
found matching vendor ID
found matching product ID
searching devices, found USB ID 17ef:1004
searching devices, found USB ID 1d6b:0002
Found devices in target mode or class (1)
Looking for default devices ...
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0a5c:2145
searching devices, found USB ID 08ff:2810
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0bdb:1900
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0af0:7381
found matching vendor ID
found matching product ID
searching devices, found USB ID 17ef:1004
searching devices, found USB ID 1d6b:0002
Found default devices (1)
Found a default device NOT in target class mode
Accessing device 015 on bus 001 ...
USB description data (for identification)
-------------------------
Manufacturer: Option N.V.
Product: Globetrotter HSUPA Modem
Serial No.: Serial Number
-------------------------
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
Setting up communication with interface 0 ...
Trying to send the message to endpoint 0x01 ...
USB error: could not claim interface 0: No such device
usb_os_find_devices: Found 001 on 006
usb_os_find_devices: Found 001 on 005
usb_os_find_devices: Found 003 on 004
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 002 on 004
usb_os_find_devices: Found 001 on 004
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 003
usb_os_find_devices: Found 001 on 008
usb_os_find_devices: Found 001 on 007
usb_os_find_devices: Found 002 on 002
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 002
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 016 on 001
usb_os_find_devices: Found 004 on 001
skipping descriptor 0xB
skipped 1 class/vendor specific endpoint descriptors
skipped 5 class/vendor specific interface descriptors
skipping descriptor 0x25
skipped 1 class/vendor specific endpoint descriptors
skipped 9 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 006
usb_os_find_devices: Found 001 on 005
usb_os_find_devices: Found 003 on 004
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 002 on 004
usb_os_find_devices: Found 001 on 004
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 003
usb_os_find_devices: Found 001 on 008
usb_os_find_devices: Found 001 on 007
usb_os_find_devices: Found 002 on 002
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 002
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 016 on 001
usb_os_find_devices: Found 004 on 001
skipping descriptor 0xB
skipped 1 class/vendor specific endpoint descriptors
skipped 5 class/vendor specific interface descriptors
skipping descriptor 0x25
skipped 1 class/vendor specific endpoint descriptors
skipped 9 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 006
usb_os_find_devices: Found 001 on 005
usb_os_find_devices: Found 003 on 004
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 002 on 004
usb_os_find_devices: Found 001 on 004
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 003
usb_os_find_devices: Found 001 on 008
usb_os_find_devices: Found 001 on 007
usb_os_find_devices: Found 002 on 002
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 002
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 016 on 001
usb_os_find_devices: Found 004 on 001
skipping descriptor 0xB
skipped 1 class/vendor specific endpoint descriptors
skipped 5 class/vendor specific interface descriptors
skipping descriptor 0x25
skipped 1 class/vendor specific endpoint descriptors
skipped 9 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 006
usb_os_find_devices: Found 001 on 005
usb_os_find_devices: Found 003 on 004
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 002 on 004
usb_os_find_devices: Found 001 on 004
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 003
usb_os_find_devices: Found 001 on 008
usb_os_find_devices: Found 001 on 007
usb_os_find_devices: Found 002 on 002
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 002
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 016 on 001
usb_os_find_devices: Found 004 on 001
skipping descriptor 0xB
skipped 1 class/vendor specific endpoint descriptors
skipped 5 class/vendor specific interface descriptors
skipping descriptor 0x25
skipped 1 class/vendor specific endpoint descriptors
skipped 9 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 006
usb_os_find_devices: Found 001 on 005
usb_os_find_devices: Found 003 on 004
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 002 on 004
usb_os_find_devices: Found 001 on 004
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 003
usb_os_find_devices: Found 001 on 008
usb_os_find_devices: Found 001 on 007
usb_os_find_devices: Found 002 on 002
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 002
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 016 on 001
usb_os_find_devices: Found 004 on 001
skipping descriptor 0xB
skipped 1 class/vendor specific endpoint descriptors
skipped 5 class/vendor specific interface descriptors
skipping descriptor 0x25
skipped 1 class/vendor specific endpoint descriptors
skipped 9 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 006
usb_os_find_devices: Found 001 on 005
usb_os_find_devices: Found 003 on 004
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 002 on 004
usb_os_find_devices: Found 001 on 004
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 003
usb_os_find_devices: Found 001 on 008
usb_os_find_devices: Found 001 on 007
usb_os_find_devices: Found 002 on 002
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 002
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 016 on 001
usb_os_find_devices: Found 004 on 001
skipping descriptor 0xB
skipped 1 class/vendor specific endpoint descriptors
skipped 5 class/vendor specific interface descriptors
skipping descriptor 0x25
skipped 1 class/vendor specific endpoint descriptors
skipped 9 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 006
usb_os_find_devices: Found 001 on 005
usb_os_find_devices: Found 003 on 004
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 002 on 004
usb_os_find_devices: Found 001 on 004
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 003
usb_os_find_devices: Found 001 on 008
usb_os_find_devices: Found 001 on 007
usb_os_find_devices: Found 002 on 002
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 002
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 016 on 001
usb_os_find_devices: Found 004 on 001
skipping descriptor 0xB
skipped 1 class/vendor specific endpoint descriptors
skipped 5 class/vendor specific interface descriptors
skipping descriptor 0x25
skipped 1 class/vendor specific endpoint descriptors
skipped 9 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
OK, message successfully sent
Checking for mode switch (max. 10 times, once per second) ...
Waiting for original device to vanish ...
Original device can't be accessed anymore. Good.
Searching for target devices ...
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0a5c:2145
searching devices, found USB ID 08ff:2810
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0bdb:1900
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0af0:7381
found matching vendor ID
found matching product ID
Searching for target devices ...
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0a5c:2145
searching devices, found USB ID 08ff:2810
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0bdb:1900
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0af0:7381
found matching vendor ID
found matching product ID
Searching for target devices ...
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0a5c:2145
searching devices, found USB ID 08ff:2810
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0bdb:1900
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0af0:7381
found matching vendor ID
found matching product ID
Searching for target devices ...
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0a5c:2145
searching devices, found USB ID 08ff:2810
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0bdb:1900
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0af0:7381
found matching vendor ID
found matching product ID
Searching for target devices ...
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0a5c:2145
searching devices, found USB ID 08ff:2810
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0bdb:1900
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0af0:7381
found matching vendor ID
found matching product ID
Searching for target devices ...
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0a5c:2145
searching devices, found USB ID 08ff:2810
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0bdb:1900
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0af0:7381
found matching vendor ID
found matching product ID
Searching for target devices ...
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0a5c:2145
searching devices, found USB ID 08ff:2810
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0bdb:1900
searching devices, found USusb_os_find_devices: Found 001 on 006
usb_os_find_devices: Found 001 on 005
usb_os_find_devices: Found 003 on 004
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 002 on 004
usb_os_find_devices: Found 001 on 004
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 003
usb_os_find_devices: Found 001 on 008
usb_os_find_devices: Found 001 on 007
usb_os_find_devices: Found 002 on 002
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 002
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 016 on 001
usb_os_find_devices: Found 004 on 001
skipping descriptor 0xB
skipped 1 class/vendor specific endpoint descriptors
skipped 5 class/vendor specific interface descriptors
skipping descriptor 0x25
skipped 1 class/vendor specific endpoint descriptors
skipped 9 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 006
usb_os_find_devices: Found 001 on 005
usb_os_find_devices: Found 003 on 004
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 002 on 004
usb_os_find_devices: Found 001 on 004
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 003
usb_os_find_devices: Found 001 on 008
usb_os_find_devices: Found 001 on 007
usb_os_find_devices: Found 002 on 002
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 002
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 016 on 001
usb_os_find_devices: Found 004 on 001
skipping descriptor 0xB
skipped 1 class/vendor specific endpoint descriptors
skipped 5 class/vendor specific interface descriptors
skipping descriptor 0x25
skipped 1 class/vendor specific endpoint descriptors
skipped 9 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 006
usb_os_find_devices: Found 001 on 005
usb_os_find_devices: Found 003 on 004
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 002 on 004
usb_os_find_devices: Found 001 on 004
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 003
usb_os_find_devices: Found 001 on 008
usb_os_find_devices: Found 001 on 007
usb_os_find_devices: Found 002 on 002
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 002
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 016 on 001
usb_os_find_devices: Found 004 on 001
skipping descriptor 0xB
skipped 1 class/vendor specific endpoint descriptors
skipped 5 class/vendor specific interface descriptors
skipping descriptor 0x25
skipped 1 class/vendor specific endpoint descriptors
skipped 9 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
B ID 1d6b:0002
searching devices, found USB ID 0af0:7381
found matching vendor ID
found matching product ID
Searching for target devices ...
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0a5c:2145
searching devices, found USB ID 08ff:2810
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0bdb:1900
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0af0:7381
found matching vendor ID
found matching product ID
Searching for target devices ...
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0a5c:2145
searching devices, found USB ID 08ff:2810
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0bdb:1900
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0af0:7381
found matching vendor ID
found matching product ID
Searching for target devices ...
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0a5c:2145
searching devices, found USB ID 08ff:2810
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0bdb:1900
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0af0:7381
found matching vendor ID
found matching product ID
No new devices in target mode or class found
Mode switch has failed. Bye.
fail:
--------------------------------
(end of usb_modeswitch output)
All done, exiting
I'm very frustrated to be unable to get this unter control. I would be happy if anyone has hints for me.
Many thanks in advance for your support
Sebastian
-
Josh
- Site Admin
- Posts: 6593
- Joined: 03 Nov 2007, 00:30
Post
by Josh » 08 Mar 2010, 11:58
There might be a bug in the success check logic.
Can you try this alpha code?
Just replace the old .c and .h files and "make install".
-
sluckau
- Posts: 2
- Joined: 07 Mar 2010, 23:34
Post
by sluckau » 09 Mar 2010, 00:47
Hello,
thanks a lot for your quick response and support.
I have installed the new code.
Code: Select all linux-slu:/home/slu/downloads/usb-modeswitch/usb-modeswitch-1.1.1alpha # ls
40-usb_modeswitch.rules Makefile usb_modeswitch.1 usb_modeswitch.d
ChangeLog README usb_modeswitch.c usb_modeswitch.h
COPYING usb_modeswitch usb_modeswitch.conf usb_modeswitch.sh
linux-slu:/home/slu/downloads/usb-modeswitch/usb-modeswitch-1.1.1alpha # make install
gcc -Wall -l usb -o usb_modeswitch usb_modeswitch.c
install -d /usr/sbin
install --mode=755 ./usb_modeswitch /usr/sbin
install --mode=755 ./usb_modeswitch.sh /lib/udev/usb_modeswitch
install -d /etc/usb_modeswitch.d
install --mode=644 -t /etc/usb_modeswitch.d ./usb_modeswitch.d/*
install --mode=644 usb_modeswitch.1 /usr/share/man/man1
mkdir -p /lib/udev/rules.d
install --mode=644 40-usb_modeswitch.rules /lib/udev/rules.d
if [ `which udevadm 2>/dev/null` ]; then \
UDEVADM=`which udevadm`; \
UDEVADM_VER=`$UDEVADM -V 2>/dev/null`; \
if [ -z $UDEVADM_VER ]; then \
UDEVADM_VER=`$UDEVADM --version 2>/dev/null`; \
fi; \
if [ $UDEVADM_VER -gt 127 ]; then \
$UDEVADM control --reload-rules; \
else \
$UDEVADM control --reload_rules; \
fi \
elif [ `which udevcontrol 2>/dev/null` ]; then \
`which udevcontrol` reload_rules; \
fi
Then I have plugged the umts card as well.
Code: Select all lsusb
Bus 001 Device 007: ID 0af0:7381 Option
/var/log/messages looks better now..
Code: Select all Mar 8 23:03:59 linux-slu kernel: usb 1-2: new high speed USB device using ehci_hcd and address 6
Mar 8 23:03:59 linux-slu kernel: usb 1-2: configuration #1 chosen from 1 choice
Mar 8 23:03:59 linux-slu kernel: usb 1-2: New USB device found, idVendor=0af0, idProduct=7381
Mar 8 23:03:59 linux-slu kernel: usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
Mar 8 23:03:59 linux-slu kernel: usb 1-2: Product: Globetrotter HSUPA Modem
Mar 8 23:03:59 linux-slu kernel: usb 1-2: Manufacturer: Option N.V.
Mar 8 23:03:59 linux-slu kernel: usb 1-2: SerialNumber: Serial Number
Mar 8 23:04:00 linux-slu usb-modeswitch: switching 0af0:7381 (Option N.V.: Globetrotter HSUPA Modem)
Mar 8 23:04:00 linux-slu kernel: usb 1-2: USB disconnect, address 6
Mar 8 23:04:01 linux-slu kernel: Initializing USB Mass Storage driver...
Mar 8 23:04:01 linux-slu kernel: usb 1-2: new high speed USB device using ehci_hcd and address 7
Mar 8 23:04:01 linux-slu kernel: usb 1-2: configuration #1 chosen from 1 choice
Mar 8 23:04:01 linux-slu kernel: usb 1-2: New USB device found, idVendor=0af0, idProduct=7381
Mar 8 23:04:01 linux-slu kernel: usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
Mar 8 23:04:01 linux-slu kernel: usb 1-2: Product: Option Configuration
Mar 8 23:04:01 linux-slu kernel: usb 1-2: Manufacturer: Option N.V.
Mar 8 23:04:01 linux-slu kernel: usbcore: registered new interface driver usb-storage
Mar 8 23:04:01 linux-slu kernel: USB Mass Storage support registered.
Mar 8 23:04:01 linux-slu pulseaudio[5117]: module-hal-detect.c: Error getting capability: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/usb_device_af0_7381_Serial_Number_if0
Mar 8 23:04:01 linux-slu usb-modeswitch: switched to 0000:0000 (Option N.V.: Option Configuration)
Mar 8 23:04:02 linux-slu kernel: usbcore: registered new interface driver usbserial
Mar 8 23:04:02 linux-slu kernel: usbserial: USB Serial support registered for generic
Mar 8 23:04:02 linux-slu kernel: usbserial_generic 1-2:1.0: generic converter detected
Mar 8 23:04:02 linux-slu kernel: usb 1-2: generic converter now attached to ttyUSB0
Mar 8 23:04:02 linux-slu kernel: usbserial_generic 1-2:1.1: generic converter detected
Mar 8 23:04:02 linux-slu kernel: usb 1-2: generic converter now attached to ttyUSB1
Mar 8 23:04:02 linux-slu kernel: usbserial_generic 1-2:1.2: generic converter detected
Mar 8 23:04:02 linux-slu kernel: usb 1-2: generic converter now attached to ttyUSB2
Mar 8 23:04:02 linux-slu kernel: usbserial_generic 1-2:1.3: generic converter detected
Mar 8 23:04:02 linux-slu kernel: usb 1-2: generic converter now attached to ttyUSB3
Mar 8 23:04:02 linux-slu kernel: usbserial_generic 1-2:1.4: generic converter detected
Mar 8 23:04:02 linux-slu kernel: usb 1-2: generic converter now attached to ttyUSB4
Mar 8 23:04:02 linux-slu kernel: usbserial_generic 1-2:1.5: generic converter detected
Mar 8 23:04:02 linux-slu kernel: usb 1-2: generic converter now attached to ttyUSB5
Mar 8 23:04:02 linux-slu kernel: usbserial_generic 1-2:1.6: generic converter detected
Mar 8 23:04:02 linux-slu kernel: usb 1-2: generic converter now attached to ttyUSB6
Mar 8 23:04:02 linux-slu kernel: usbserial_generic 1-2:1.7: generic converter detected
Mar 8 23:04:02 linux-slu kernel: usb 1-2: generic converter now attached to ttyUSB7
Mar 8 23:04:02 linux-slu kernel: usbserial_generic 1-2:1.8: generic converter detected
Mar 8 23:04:02 linux-slu kernel: usb 1-2: generic converter now attached to ttyUSB8
Mar 8 23:04:02 linux-slu kernel: usbserial_generic 1-2:1.9: generic converter detected
Mar 8 23:04:02 linux-slu kernel: usb 1-2: generic converter now attached to ttyUSB9
Mar 8 23:04:02 linux-slu kernel: usbcore: registered new interface driver usbserial_generic
Mar 8 23:04:02 linux-slu kernel: usbserial: USB Serial Driver core
Mar 8 23:04:02 linux-slu logger: usb_modeswitch: adding device ID 0af0:7381 to driver "option""
Mar 8 23:04:02 linux-slu kernel: usbserial: USB Serial support registered for GSM modem (1-port)
Mar 8 23:04:02 linux-slu kernel: usbcore: registered new interface driver option
Mar 8 23:04:02 linux-slu kernel: option: USB Driver for GSM modems: v0.7.2
Mar 8 23:04:02 linux-slu udevadm[22487]: the program '/bin/bash' called 'udevinfo', it should use 'udevadm info <options>', this will stop working in a future release
Mar 8 23:04:02 linux-slu udevadm[22485]: the program '/bin/bash' called 'udevinfo', it should use 'udevadm info <options>', this will stop working in a future release
Mar 8 23:04:02 linux-slu udevadm[22483]: the program '/bin/bash' called 'udevinfo', it should use 'udevadm info <options>', this will stop working in a future release
Mar 8 23:04:02 linux-slu udevadm[22491]: the program '/bin/bash' called 'udevinfo', it should use 'udevadm info <options>', this will stop working in a future release
Mar 8 23:04:02 linux-slu udevadm[22495]: the program '/bin/bash' called 'udevinfo', it should use 'udevadm info <options>', this will stop working in a future release
Mar 8 23:04:02 linux-slu udevadm[22490]: the program '/bin/bash' called 'udevinfo', it should use 'udevadm info <options>', this will stop working in a future release
Mar 8 23:04:02 linux-slu udevadm[22480]: the program '/bin/bash' called 'udevinfo', it should use 'udevadm info <options>', this will stop working in a future release
Mar 8 23:04:02 linux-slu udevadm[22501]: the program '/bin/bash' called 'udevinfo', it should use 'udevadm info <options>', this will stop working in a future release
Mar 8 23:04:02 linux-slu udevadm[22505]: the program '/bin/bash' called 'udevinfo', it should use 'udevadm info <options>', this will stop working in a future release
Mar 8 23:04:02 linux-slu udevadm[22506]: the program '/bin/bash' called 'udevinfo', it should use 'udevadm info <options>', this will stop working in a future release
The device files /dev/ttyUSB* has been created successfully.
Code: Select all linux-slu:/dev # ls ttyUSB*
ttyUSB0 ttyUSB1 ttyUSB2 ttyUSB3 ttyUSB4 ttyUSB5 ttyUSB6 ttyUSB7 ttyUSB8 ttyUSB9
linux-slu:/dev #
Also /var/log/usb_modeswitch* logfile looks better, even if I don't understand why usb_modeswitch has switched to usb id: 0000:0000...
Code: Select all USB_ModeSwitch log from Mon Mar 08 23:42:23 CET 2010
raw args from udev: /1-2:1.0 {}
Bus ID for device not given by udev.
Trying to determine it from kernel name (1-2:1.0) ...
USB dir exists: /sys/bus/usb/devices/1-2
----------------
USB values from sysfs:
manufacturer Option N.V.
product Globetrotter HSUPA Modem
serial Serial Number
----------------
SCSI attributes not needed, moving on
checking config: /etc/usb_modeswitch.d/0af0:7381
! matched, now switching
(running command: /usr/sbin/usb_modeswitch -I -W -c /etc/usb_modeswitch.d/0af0:7381)
verbose output of usb_modeswitch:
--------------------------------
usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found 006
usb_os_find_busses: Found 008
usb_os_find_busses: Found 007
usb_os_find_busses: Found 004
usb_os_find_busses: Found 003
usb_os_find_busses: Found 005
usb_os_find_busses: Found 002
usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 006
usb_os_find_devices: Found 001 on 008
usb_os_find_devices: Found 001 on 007
usb_os_find_devices: Found 003 on 004
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 002 on 004
usb_os_find_devices: Found 001 on 004
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 003
usb_os_find_devices: Found 001 on 005
usb_os_find_devices: Found 006 on 002
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 002
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 010 on 001
usb_os_find_devices: Found 005 on 001
skipping descriptor 0xB
skipped 1 class/vendor specific endpoint descriptors
skipped 5 class/vendor specific interface descriptors
skipping descriptor 0x25
skipped 1 class/vendor specific endpoint descriptors
skipped 9 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
Reading config file: /etc/usb_modeswitch.d/0af0:7381
* usb-modeswitch: handle USB devices with multiple modes
* Version 1.1.1alpha (C) Josua Dietze 2010
* Based on libusb 0.1.12
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x0af0
DefaultProduct= 0x7381
TargetVendor= not set
TargetProduct= not set
TargetClass= 0xff
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
GCTMode=0
MessageEndpoint= not set
MessageContent="55534243785634120100000080000601000000000000000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
Interface=0x00
InquireDevice disabled
Success check enabled, max. wait time 10 seconds
System integration mode enabled
Looking for target devices ...
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0a5c:2145
searching devices, found USB ID 08ff:2810
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0bdb:1900
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0af0:7381
found matching vendor ID
found matching product ID
target class ff not matching
searching devices, found USB ID 17ef:1004
searching devices, found USB ID 1d6b:0002
No devices in target mode or class found
Looking for default devices ...
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0a5c:2145
searching devices, found USB ID 08ff:2810
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0bdb:1900
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0af0:7381
found matching vendor ID
found matching product ID
target class ff not matching
adding device as default
searching devices, found USB ID 17ef:1004
searching devices, found USB ID 1d6b:0002
Found devices in default mode or class (1)
Accessing device 010 on bus 001 ...
USB description data (for identification)
-------------------------
Manufacturer: Option N.V.
Product: Globetrotter HSUPA Modem
Serial No.: Serial Number
-------------------------
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
Setting up communication with interface 0 ...
Trying to send the message to endpoint 0x01 ...
USB error: could not claim interface 0: No such device
usb_os_find_devices: Found 001 on 006
usb_os_find_devices: Found 001 on 008
usb_os_find_devices: Found 001 on 007
usb_os_find_devices: Found 003 on 004
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 002 on 004
usb_os_find_devices: Found 001 on 004
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 003
usb_os_find_devices: Found 001 on 005
usb_os_find_devices: Found 006 on 002
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 3 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 4 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 2 class/vendor specific interface descriptors
skipped 5 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 002
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 011 on 001
usb_os_find_devices: Found 005 on 001
skipping descriptor 0xB
skipped 1 class/vendor specific endpoint descriptors
skipped 5 class/vendor specific interface descriptors
skipping descriptor 0x25
skipped 1 class/vendor specific endpoint descriptors
skipped 9 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
OK, message successfully sent
Checking for mode switch (max. 10 times, once per second) ...
Waiting for original device to vanish ...
Original device can't be accessed anymore. Good.
Searching for target devices ...
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0a5c:2145
searching devices, found USB ID 08ff:2810
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 0bdb:1900
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0af0:7381
found matching vendor ID
found matching product ID
target class ff matching
adding device
searching devices, found USB ID 17ef:1004
searching devices, found USB ID 1d6b:0002
Found target device 011 on bus 001
Target device description data
-------------------------
Manufacturer: Option N.V.
Product: Option Configuration
Serial No.: not provided
-------------------------
Found correct target device
Mode switch succeeded. Bye.
ok:0000:0000
--------------------------------
(end of usb_modeswitch output)
Now checking for newly created serial devices ...
new serial devices found, driver has bound
All done, exiting
Unfortunately umtsmon shows following message and does not work:
Code: Select all ./umtsmon.sh
umtsmon version 0.9.50-20081117 .
##P1 t=909: Set force autodetection to true
installing GUI SIGABRT handler
##P1 t=909: AutoDetectBase::createDevice() failed :-(
Serial::openDev-ioctl() get termio buf failed: Input/output error
Serial::openDev-ioctl() get termio buf failed: Input/output error
Serial::openDev-ioctl() get termio buf failed: Input/output error
Serial::openDev-ioctl() get termio buf failed: Input/output error
Serial::openDev-ioctl() get termio buf failed: Input/output error
Serial::openDev-ioctl() get termio buf failed: Input/output error
Serial::openDev-ioctl() get termio buf failed: Input/output error
Serial::openDev-ioctl() get termio buf failed: Input/output error
##P1 t=911: S_MY_PAIR VOID
Could not write to serial device: Resource temporarily unavailable
##P1 t=913: *** CRITICAL ERROR: Kann nicht (mehr) auf das Ger�t schreiben
DCOPClient::attachInternal. Attach failed Could not open network socket
DCOPClient::attachInternal. Attach failed Could not open network socket
*** umtsmon version 0.9.50-20081117 closed due to an unrecoverable program error.
*** Please e-mail all of the above output to umtsmon-develop@lists.sourceforge.net,
*** Or go to the umtsmon website and file a bug.
##P1 t=922: Critical Popup - application will halt
Mutex destroy failure: Device or resource busy
Therefore I have carried out umtsmon in complete verbose mode.
Code: Select all umtsmon --force-autodetect --verbosity 6
umtsmon version 0.9.50-20081117 .
##P1 t=291: Set force autodetection to true
##P1 t=291: setVerbosity: '6'
##P2 t=291: set verbosity level to 6
##P2 t=291: set PPP verbosity level to 2
installing text SIGABRT handler
##P5 t=291: TheSettingsSingleton::TheSettingsSingleton()
##P2 t=291: Settings will be saved in : '/root/.umtsmon'
##P5 t=291: Trying locale 'de' from settings file...
##P4 t=291: loadTranslator('qt', 'de')
##P5 t=291: Translation filename: 'qt_de'
##P5 t=291: . searching for qt_de.qm in .
##P5 t=291: . searching for qt_de.qm in i18n
##P5 t=291: . searching for qt_de.qm in /usr/share/qt/translations
##P5 t=291: . searching for qt_de.qm in /usr/lib/qt3/translations
##P4 t=291: .. found in '/usr/lib/qt3/translations'
##P4 t=291: loadTranslator('umtsmon', 'de')
##P5 t=291: Translation filename: 'umtsmon_de'
##P5 t=291: . searching for umtsmon_de.qm in .
##P5 t=291: . searching for umtsmon_de.qm in i18n
##P5 t=291: . searching for umtsmon_de.qm in /usr/share/umtsmon/translations
##P4 t=291: .. found in '/usr/share/umtsmon/translations'
##P3 t=291: Will use specified (de) locale for QT-internal strings
##P3 t=291: Will use specified (de) locale for umtsmon strings
##P2 t=291: Warning with Memory Name: WelcomeMsg, Message: Welcome to umtsmon.
umtsmon will now search for a supported device.
##P3 t=291: Message not shown due to user preference
##P3 t=291: TheDeviceManagerSingleton::setupDevice(void)
##P3 t=291: Start iterating through all AutoDetectors
##P4 t=291: Kernel: 'Linux version 2.6.27.45-0.1-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2010-02-22 16:49:47 +0100'
##P2 t=291: Force Autodetection enabled - skipping device instantiation from supplied values
##P3 t=291: Let's continue with the next AutoDetector
##P3 t=291: AutoDetectBase::go() for 'USB ZeroCD Autodetection'
##P3 t=291: AutoDetect_USB::traverseTrees()
##P4 t=291: Checking USB device on 006:001
##P3 t=291: AutoDetect_USB::matchIDs(0x1d6b, 0x0001)
##P4 t=291: Checking USB device on 008:001
##P3 t=291: AutoDetect_USB::matchIDs(0x1d6b, 0x0001)
##P4 t=291: Checking USB device on 007:001
##P3 t=291: AutoDetect_USB::matchIDs(0x1d6b, 0x0001)
##P4 t=291: Checking USB device on 004:003
##P3 t=291: AutoDetect_USB::matchIDs(0x0a5c, 0x2145)
##P4 t=291: Checking USB device on 004:002
##P3 t=291: AutoDetect_USB::matchIDs(0x08ff, 0x2810)
##P4 t=291: Checking USB device on 004:001
##P3 t=291: AutoDetect_USB::matchIDs(0x1d6b, 0x0001)
##P4 t=291: Checking USB device on 003:001
##P3 t=291: AutoDetect_USB::matchIDs(0x1d6b, 0x0001)
##P4 t=291: Checking USB device on 005:001
##P3 t=291: AutoDetect_USB::matchIDs(0x1d6b, 0x0001)
##P4 t=291: Checking USB device on 002:006
##P3 t=291: AutoDetect_USB::matchIDs(0x0bdb, 0x1900)
##P4 t=291: Checking USB device on 002:001
##P3 t=291: AutoDetect_USB::matchIDs(0x1d6b, 0x0002)
##P4 t=291: Checking USB device on 001:007
##P3 t=291: AutoDetect_USB::matchIDs(0x0af0, 0x7381)
##P4 t=291: Checking USB device on 001:005
##P3 t=291: AutoDetect_USB::matchIDs(0x17ef, 0x1004)
##P4 t=291: Checking USB device on 001:001
##P3 t=291: AutoDetect_USB::matchIDs(0x1d6b, 0x0002)
##P2 t=291: BAD: 'No USB-based device found'
##P3 t=291: Let's continue with the next AutoDetector
##P3 t=291: AutoDetectBase::go() for 'USB Autodetection'
##P3 t=291: AutoDetect_USB::traverseTrees()
##P4 t=291: Checking USB device on 006:001
##P3 t=291: AutoDetect_USB::matchIDs(0x1d6b, 0x0001)
##P4 t=291: Checking USB device on 008:001
##P3 t=291: AutoDetect_USB::matchIDs(0x1d6b, 0x0001)
##P4 t=291: Checking USB device on 007:001
##P3 t=291: AutoDetect_USB::matchIDs(0x1d6b, 0x0001)
##P4 t=291: Checking USB device on 004:003
##P3 t=291: AutoDetect_USB::matchIDs(0x0a5c, 0x2145)
##P4 t=291: Checking USB device on 004:002
##P3 t=291: AutoDetect_USB::matchIDs(0x08ff, 0x2810)
##P4 t=291: Checking USB device on 004:001
##P3 t=291: AutoDetect_USB::matchIDs(0x1d6b, 0x0001)
##P4 t=291: Checking USB device on 003:001
##P3 t=291: AutoDetect_USB::matchIDs(0x1d6b, 0x0001)
##P4 t=291: Checking USB device on 005:001
##P3 t=291: AutoDetect_USB::matchIDs(0x1d6b, 0x0001)
##P4 t=291: Checking USB device on 002:006
##P3 t=291: AutoDetect_USB::matchIDs(0x0bdb, 0x1900)
##P4 t=291: Checking USB device on 002:001
##P3 t=291: AutoDetect_USB::matchIDs(0x1d6b, 0x0002)
##P4 t=291: Checking USB device on 001:007
##P3 t=291: AutoDetect_USB::matchIDs(0x0af0, 0x7381)
##P2 t=291: GOOD: 'A 'Option GT family' modem detected'
##P3 t=291: AutoDetect_USB::findPortNames()
##P4 t=291: looking for ttyUSB ports
##P4 t=291: Found serial port number 1 with name 'ttyUSB0'
##P4 t=291: Found serial port number 2 with name 'ttyUSB1'
##P4 t=291: Found serial port number 3 with name 'ttyUSB2'
##P4 t=291: Found serial port number 4 with name 'ttyUSB3'
##P4 t=291: Found serial port number 5 with name 'ttyUSB4'
##P4 t=291: Found serial port number 6 with name 'ttyUSB5'
##P4 t=291: Found serial port number 7 with name 'ttyUSB6'
##P4 t=291: Found serial port number 8 with name 'ttyUSB7'
##P4 t=291: Found serial port number 9 with name 'ttyUSB8'
##P4 t=291: Found serial port number 10 with name 'ttyUSB9'
##P3 t=291: INFO: 'There are 10 ports available'
##P3 t=291: AutoDetectBase::createDevice() for Device caa1c004
##P3 t=291: Device creation for type 0xcaa1c004 requested
##P2 t=291: Profile::Profile('')
##P2 t=291: finally created profile for 'TM'
##P3 t=291: Device: probing port '/dev/ttyUSB0' for AT commands
##P3 t=291: TempSerialPort::TempSerialPort()
##P5 t=291: (nil) = Query::setSerial(0xbfc1b870)
##P6 t=291: dosmallsleep of 0 s, 200000 us
##P3 t=291: Opened '/dev/ttyUSB0' as FD 7
##P5 t=291: Query instance 0xbfc1b858 acquired MUTEX
##P5 t=291: receiveString: '(null)'
##P4 t=291: Query sends the following mesage: 'AT'
##P6 t=291: dosmallsleep of 0 s, 5000 us
##P6 t=291: dosmallsleep of 0 s, 5000 us
##P6 t=291: dosmallsleep of 0 s, 5000 us
##P6 t=291: dosmallsleep of 0 s, 5000 us
##P5 t=291: receiveString: '(null)'
##P2 t=291: Device port '/dev/ttyUSB0': no response to "AT", return code 5
##P5 t=291: Query instance 0xbfc1b858 abandoned MUTEX
##P3 t=291: Device: probing port '/dev/ttyUSB0' failed
##P3 t=291: TempSerialPort::~TempSerialPort()
##P3 t=291: SerialPort::closeDev() for FD 7
##P5 t=291: 0xbfc1b870 = Query::setSerial((nil))
##P3 t=291: Device: probing port '/dev/ttyUSB9' for AT commands
##P3 t=291: TempSerialPort::TempSerialPort()
##P5 t=291: (nil) = Query::setSerial(0xbfc1b870)
##P6 t=291: dosmallsleep of 0 s, 200000 us
##P3 t=291: Opened '/dev/ttyUSB9' as FD 7
##P5 t=291: Query instance 0xbfc1b858 acquired MUTEX
##P5 t=291: receiveString: '(null)'
##P4 t=291: Query sends the following mesage: 'AT'
##P6 t=291: dosmallsleep of 0 s, 5000 us
##P6 t=291: dosmallsleep of 0 s, 5000 us
##P6 t=292: dosmallsleep of 0 s, 5000 us
##P6 t=292: dosmallsleep of 0 s, 5000 us
##P5 t=292: receiveString: 'A'
##P4 t=292: answer 1:'A'
##P2 t=292: Device port '/dev/ttyUSB9': no response to "AT", return code 5
##P5 t=292: Query instance 0xbfc1b858 abandoned MUTEX
##P3 t=292: Device: probing port '/dev/ttyUSB9' failed
##P3 t=292: TempSerialPort::~TempSerialPort()
##P3 t=292: SerialPort::closeDev() for FD 7
##P5 t=292: 0xbfc1b870 = Query::setSerial((nil))
##P2 t=292: BAD: 'Device couldn't be created'
##P1 t=292: AutoDetectBase::createDevice() failed :-(
##P5 t=292: Device_Option::~Device_Option##P3 t=292: MonthlyTraffic::save()
##P5 t=292: MonthlyTraffic::save: totals for 2010/3 are: home=0B/0s, roaming=0B/0s
##P3 t=292: Let's continue with the next AutoDetector
##P3 t=292: AutoDetectBase::go() for 'PCMCIA (PCCard) Autodetection'
##P3 t=292: AutoDetect_PCMCIA::traverseTrees()
##P3 t=292: INFO: 'pcmcia_core kernel support (yenta) found'
##P3 t=292: INFO: 'PCMCIA kernel module found - cardctl support possible'
##P3 t=292: INFO: 'pcmcia browsing available'
##P2 t=292: BAD: 'no PCMCIA device found'
##P3 t=292: Let's continue with the next AutoDetector
##P3 t=292: AutoDetectBase::go() for 'PCMCIA Serial Modem Probing'
##P3 t=292: AutoDetect_Rawport::traverseTrees()
##P3 t=292: Checking for ports of type /dev/ttyS*
##P3 t=292: Checking properties of port /dev/ttyS0
##P3 t=292: TempSerialPort::TempSerialPort()
##P5 t=292: (nil) = Query::setSerial(0xbfc1b8a8)
Serial::openDev-ioctl() get termio buf failed: Eingabe-/Ausgabefehler
##P3 t=292: - Nothing on port /dev/ttyS0
##P3 t=292: SerialPort::closeDev() for FD -1
##P3 t=292: TempSerialPort::~TempSerialPort()
##P3 t=292: SerialPort::closeDev() for FD -1
##P5 t=292: 0xbfc1b8a8 = Query::setSerial((nil))
##P3 t=292: Checking properties of port /dev/ttyS1
##P3 t=292: TempSerialPort::TempSerialPort()
##P5 t=292: (nil) = Query::setSerial(0xbfc1b8a8)
Serial::openDev-ioctl() get termio buf failed: Eingabe-/Ausgabefehler
##P3 t=292: - Nothing on port /dev/ttyS1
##P3 t=292: SerialPort::closeDev() for FD -1
##P3 t=292: TempSerialPort::~TempSerialPort()
##P3 t=292: SerialPort::closeDev() for FD -1
##P5 t=292: 0xbfc1b8a8 = Query::setSerial((nil))
##P3 t=292: Checking properties of port /dev/ttyS2
##P3 t=292: TempSerialPort::TempSerialPort()
##P5 t=292: (nil) = Query::setSerial(0xbfc1b8a8)
Serial::openDev-ioctl() get termio buf failed: Eingabe-/Ausgabefehler
##P3 t=292: - Nothing on port /dev/ttyS2
##P3 t=292: SerialPort::closeDev() for FD -1
##P3 t=292: TempSerialPort::~TempSerialPort()
##P3 t=292: SerialPort::closeDev() for FD -1
##P5 t=292: 0xbfc1b8a8 = Query::setSerial((nil))
##P3 t=292: Checking properties of port /dev/ttyS3
##P3 t=292: TempSerialPort::TempSerialPort()
##P5 t=292: (nil) = Query::setSerial(0xbfc1b8a8)
Serial::openDev-ioctl() get termio buf failed: Eingabe-/Ausgabefehler
##P3 t=292: - Nothing on port /dev/ttyS3
##P3 t=292: SerialPort::closeDev() for FD -1
##P3 t=292: TempSerialPort::~TempSerialPort()
##P3 t=292: SerialPort::closeDev() for FD -1
##P5 t=292: 0xbfc1b8a8 = Query::setSerial((nil))
##P3 t=292: Checking properties of port /dev/ttyS4
##P3 t=292: TempSerialPort::TempSerialPort()
##P5 t=292: (nil) = Query::setSerial(0xbfc1b8a8)
Serial::openDev-ioctl() get termio buf failed: Eingabe-/Ausgabefehler
##P3 t=292: - Nothing on port /dev/ttyS4
##P3 t=292: SerialPort::closeDev() for FD -1
##P3 t=292: TempSerialPort::~TempSerialPort()
##P3 t=292: SerialPort::closeDev() for FD -1
##P5 t=292: 0xbfc1b8a8 = Query::setSerial((nil))
##P3 t=292: Checking properties of port /dev/ttyS5
##P3 t=292: TempSerialPort::TempSerialPort()
##P5 t=292: (nil) = Query::setSerial(0xbfc1b8a8)
Serial::openDev-ioctl() get termio buf failed: Eingabe-/Ausgabefehler
##P3 t=292: - Nothing on port /dev/ttyS5
##P3 t=292: SerialPort::closeDev() for FD -1
##P3 t=292: TempSerialPort::~TempSerialPort()
##P3 t=292: SerialPort::closeDev() for FD -1
##P5 t=292: 0xbfc1b8a8 = Query::setSerial((nil))
##P3 t=292: Checking properties of port /dev/ttyS6
##P3 t=292: TempSerialPort::TempSerialPort()
##P5 t=292: (nil) = Query::setSerial(0xbfc1b8a8)
Serial::openDev-ioctl() get termio buf failed: Eingabe-/Ausgabefehler
##P3 t=292: - Nothing on port /dev/ttyS6
##P3 t=292: SerialPort::closeDev() for FD -1
##P3 t=292: TempSerialPort::~TempSerialPort()
##P3 t=292: SerialPort::closeDev() for FD -1
##P5 t=292: 0xbfc1b8a8 = Query::setSerial((nil))
##P3 t=292: Checking properties of port /dev/ttyS7
##P3 t=292: TempSerialPort::TempSerialPort()
##P5 t=292: (nil) = Query::setSerial(0xbfc1b8a8)
Serial::openDev-ioctl() get termio buf failed: Eingabe-/Ausgabefehler
##P3 t=292: - Nothing on port /dev/ttyS7
##P3 t=292: SerialPort::closeDev() for FD -1
##P3 t=292: TempSerialPort::~TempSerialPort()
##P3 t=292: SerialPort::closeDev() for FD -1
##P5 t=292: 0xbfc1b8a8 = Query::setSerial((nil))
##P3 t=292: end of traverseTrees()
##P2 t=292: BAD: 'No usable device found'
##P3 t=292: Let's continue with the next AutoDetector
##P3 t=292: AutoDetect_PhoneModems::go()
##P3 t=292: AutoDetectBase::go() for 'Phone Modem Probing'
##P3 t=292: AutoDetect_Rawport::traverseTrees()
##P3 t=292: Checking for ports of type /dev/ttyACM*
##P3 t=292: end of traverseTrees()
##P2 t=292: BAD: 'No usable device found'
##P3 t=292: AutoDetectBase::go() for 'Phone Modem Probing'
##P3 t=292: AutoDetect_Rawport::traverseTrees()
##P3 t=292: Checking for ports of type /dev/rfcomm*
##P3 t=292: end of traverseTrees()
##P2 t=292: BAD: 'No usable device found'
##P3 t=292: Let's continue with the next AutoDetector
##P3 t=292: AutoDetectBase::go() for 'Raw USB Serial Probing'
##P3 t=292: AutoDetect_Rawport::traverseTrees()
##P3 t=292: Checking for ports of type /dev/ttyUSB*
##P3 t=292: Checking properties of port /dev/ttyUSB0
##P3 t=292: TempSerialPort::TempSerialPort()
##P5 t=292: (nil) = Query::setSerial(0xbfc1b8a8)
##P6 t=292: dosmallsleep of 0 s, 200000 us
##P3 t=292: Opened '/dev/ttyUSB0' as FD 15
##P2 t=292: GOOD: 'Serial port /dev/ttyUSB0 is operational'
##P3 t=292: SerialPort::closeDev() for FD 15
##P3 t=292: TempSerialPort::~TempSerialPort()
##P3 t=292: SerialPort::closeDev() for FD -1
##P5 t=292: 0xbfc1b8a8 = Query::setSerial((nil))
##P3 t=292: Checking properties of port /dev/ttyUSB1
##P3 t=292: TempSerialPort::TempSerialPort()
##P5 t=292: (nil) = Query::setSerial(0xbfc1b8a8)
##P6 t=292: dosmallsleep of 0 s, 200000 us
##P3 t=292: Opened '/dev/ttyUSB1' as FD 15
##P2 t=292: GOOD: 'Serial port /dev/ttyUSB1 is operational'
##P3 t=292: SerialPort::closeDev() for FD 15
##P3 t=292: TempSerialPort::~TempSerialPort()
##P3 t=292: SerialPort::closeDev() for FD -1
##P5 t=292: 0xbfc1b8a8 = Query::setSerial((nil))
##P3 t=292: Checking properties of port /dev/ttyUSB2
##P3 t=292: TempSerialPort::TempSerialPort()
##P5 t=292: (nil) = Query::setSerial(0xbfc1b8a8)
##P6 t=292: dosmallsleep of 0 s, 200000 us
##P3 t=292: Opened '/dev/ttyUSB2' as FD 15
##P2 t=292: GOOD: 'Serial port /dev/ttyUSB2 is operational'
##P3 t=292: SerialPort::closeDev() for FD 15
##P3 t=292: TempSerialPort::~TempSerialPort()
##P3 t=292: SerialPort::closeDev() for FD -1
##P5 t=292: 0xbfc1b8a8 = Query::setSerial((nil))
##P3 t=292: Checking properties of port /dev/ttyUSB3
##P3 t=292: TempSerialPort::TempSerialPort()
##P5 t=292: (nil) = Query::setSerial(0xbfc1b8a8)
##P6 t=292: dosmallsleep of 0 s, 200000 us
##P3 t=292: Opened '/dev/ttyUSB3' as FD 15
##P2 t=292: GOOD: 'Serial port /dev/ttyUSB3 is operational'
##P3 t=292: SerialPort::closeDev() for FD 15
##P3 t=292: TempSerialPort::~TempSerialPort()
##P3 t=292: SerialPort::closeDev() for FD -1
##P5 t=292: 0xbfc1b8a8 = Query::setSerial((nil))
##P3 t=292: Checking properties of port /dev/ttyUSB4
##P3 t=292: TempSerialPort::TempSerialPort()
##P5 t=292: (nil) = Query::setSerial(0xbfc1b8a8)
##P6 t=292: dosmallsleep of 0 s, 200000 us
##P3 t=293: Opened '/dev/ttyUSB4' as FD 15
##P2 t=293: GOOD: 'Serial port /dev/ttyUSB4 is operational'
##P3 t=293: SerialPort::closeDev() for FD 15
##P3 t=293: TempSerialPort::~TempSerialPort()
##P3 t=293: SerialPort::closeDev() for FD -1
##P5 t=293: 0xbfc1b8a8 = Query::setSerial((nil))
##P3 t=293: Checking properties of port /dev/ttyUSB5
##P3 t=293: TempSerialPort::TempSerialPort()
##P5 t=293: (nil) = Query::setSerial(0xbfc1b8a8)
##P6 t=293: dosmallsleep of 0 s, 200000 us
##P3 t=293: Opened '/dev/ttyUSB5' as FD 15
##P2 t=293: GOOD: 'Serial port /dev/ttyUSB5 is operational'
##P3 t=293: SerialPort::closeDev() for FD 15
##P3 t=293: TempSerialPort::~TempSerialPort()
##P3 t=293: SerialPort::closeDev() for FD -1
##P5 t=293: 0xbfc1b8a8 = Query::setSerial((nil))
##P3 t=293: Checking properties of port /dev/ttyUSB6
##P3 t=293: TempSerialPort::TempSerialPort()
##P5 t=293: (nil) = Query::setSerial(0xbfc1b8a8)
##P6 t=293: dosmallsleep of 0 s, 200000 us
##P3 t=293: Opened '/dev/ttyUSB6' as FD 15
##P2 t=293: GOOD: 'Serial port /dev/ttyUSB6 is operational'
##P3 t=293: SerialPort::closeDev() for FD 15
##P3 t=293: TempSerialPort::~TempSerialPort()
##P3 t=293: SerialPort::closeDev() for FD -1
##P5 t=293: 0xbfc1b8a8 = Query::setSerial((nil))
##P3 t=293: Checking properties of port /dev/ttyUSB7
##P3 t=293: TempSerialPort::TempSerialPort()
##P5 t=293: (nil) = Query::setSerial(0xbfc1b8a8)
##P6 t=293: dosmallsleep of 0 s, 200000 us
##P3 t=293: Opened '/dev/ttyUSB7' as FD 15
##P2 t=293: GOOD: 'Serial port /dev/ttyUSB7 is operational'
##P3 t=293: SerialPort::closeDev() for FD 15
##P3 t=293: TempSerialPort::~TempSerialPort()
##P3 t=293: SerialPort::closeDev() for FD -1
##P5 t=293: 0xbfc1b8a8 = Query::setSerial((nil))
##P3 t=293: Checking properties of port /dev/ttyUSB8
##P3 t=293: TempSerialPort::TempSerialPort()
##P5 t=293: (nil) = Query::setSerial(0xbfc1b8a8)
##P6 t=293: dosmallsleep of 0 s, 200000 us
##P3 t=293: Opened '/dev/ttyUSB8' as FD 15
##P2 t=293: GOOD: 'Serial port /dev/ttyUSB8 is operational'
##P3 t=293: SerialPort::closeDev() for FD 15
##P3 t=293: TempSerialPort::~TempSerialPort()
##P3 t=293: SerialPort::closeDev() for FD -1
##P5 t=293: 0xbfc1b8a8 = Query::setSerial((nil))
##P3 t=293: Checking properties of port /dev/ttyUSB9
##P3 t=293: TempSerialPort::TempSerialPort()
##P5 t=293: (nil) = Query::setSerial(0xbfc1b8a8)
##P6 t=293: dosmallsleep of 0 s, 200000 us
##P3 t=294: Opened '/dev/ttyUSB9' as FD 15
##P2 t=294: GOOD: 'Serial port /dev/ttyUSB9 is operational'
##P3 t=294: SerialPort::closeDev() for FD 15
##P3 t=294: TempSerialPort::~TempSerialPort()
##P3 t=294: SerialPort::closeDev() for FD -1
##P5 t=294: 0xbfc1b8a8 = Query::setSerial((nil))
##P3 t=294: end of traverseTrees()
##P3 t=294: There are 10 devices in my valid list
##P3 t=294: AutoDetect_Rawport::findPortNames()
##P1 t=294: S_MY_PAIR VOID
##P5 t=294: - probing for AT on device: /dev/ttyUSB0
##P3 t=294: TempSerialPort::TempSerialPort()
##P5 t=294: (nil) = Query::setSerial(0xbfc1b8ac)
##P5 t=294: - testing baud rate 115200 bps
##P6 t=294: dosmallsleep of 0 s, 200000 us
##P3 t=294: Opened '/dev/ttyUSB0' as FD 15
##P5 t=294: Query instance 0xbfc1b894 acquired MUTEX
##P5 t=294: receiveString: '(null)'
##P4 t=294: Query sends the following mesage: 'AT'
##P6 t=294: dosmallsleep of 0 s, 5000 us
##P6 t=294: dosmallsleep of 0 s, 5000 us
##P6 t=294: dosmallsleep of 0 s, 5000 us
##P6 t=294: dosmallsleep of 0 s, 5000 us
##P5 t=294: receiveString: '(null)'
##P5 t=294: Query instance 0xbfc1b894 abandoned MUTEX
##P3 t=294: TempSerialPort::~TempSerialPort()
##P3 t=294: SerialPort::closeDev() for FD 15
##P5 t=294: 0xbfc1b8ac = Query::setSerial((nil))
##P3 t=294: TempSerialPort::TempSerialPort()
##P5 t=294: (nil) = Query::setSerial(0xbfc1b8ac)
##P5 t=294: - testing baud rate 57600 bps
##P6 t=294: dosmallsleep of 0 s, 200000 us
##P3 t=294: Opened '/dev/ttyUSB0' as FD 15
##P5 t=294: Query instance 0xbfc1b894 acquired MUTEX
##P5 t=294: receiveString: '(null)'
##P4 t=294: Query sends the following mesage: 'AT'
##P6 t=294: dosmallsleep of 0 s, 5000 us
##P6 t=294: dosmallsleep of 0 s, 5000 us
##P6 t=294: dosmallsleep of 0 s, 5000 us
##P6 t=294: dosmallsleep of 0 s, 5000 us
##P5 t=294: receiveString: '(null)'
##P5 t=294: Query instance 0xbfc1b894 abandoned MUTEX
##P3 t=294: TempSerialPort::~TempSerialPort()
##P3 t=294: SerialPort::closeDev() for FD 15
##P5 t=294: 0xbfc1b8ac = Query::setSerial((nil))
##P3 t=294: TempSerialPort::TempSerialPort()
##P5 t=294: (nil) = Query::setSerial(0xbfc1b8ac)
##P5 t=294: - testing baud rate 38400 bps
##P6 t=294: dosmallsleep of 0 s, 200000 us
##P3 t=294: Opened '/dev/ttyUSB0' as FD 15
##P5 t=294: Query instance 0xbfc1b894 acquired MUTEX
##P5 t=294: receiveString: '(null)'
##P4 t=294: Query sends the following mesage: 'AT'
##P6 t=294: dosmallsleep of 0 s, 5000 us
##P6 t=294: dosmallsleep of 0 s, 5000 us
##P6 t=294: dosmallsleep of 0 s, 5000 us
##P6 t=294: dosmallsleep of 0 s, 5000 us
##P5 t=294: receiveString: '(null)'
##P5 t=294: Query instance 0xbfc1b894 abandoned MUTEX
##P3 t=294: TempSerialPort::~TempSerialPort()
##P3 t=294: SerialPort::closeDev() for FD 15
##P5 t=294: 0xbfc1b8ac = Query::setSerial((nil))
##P3 t=294: TempSerialPort::TempSerialPort()
##P5 t=294: (nil) = Query::setSerial(0xbfc1b8ac)
##P5 t=294: - testing baud rate 19200 bps
##P6 t=294: dosmallsleep of 0 s, 200000 us
##P3 t=295: Opened '/dev/ttyUSB0' as FD 15
##P5 t=295: Query instance 0xbfc1b894 acquired MUTEX
##P5 t=295: receiveString: '(null)'
##P4 t=295: Query sends the following mesage: 'AT'
##P6 t=295: dosmallsleep of 0 s, 5000 us
##P6 t=295: dosmallsleep of 0 s, 5000 us
##P6 t=295: dosmallsleep of 0 s, 5000 us
##P6 t=295: dosmallsleep of 0 s, 5000 us
##P5 t=295: receiveString: '(null)'
##P5 t=295: Query instance 0xbfc1b894 abandoned MUTEX
##P3 t=295: TempSerialPort::~TempSerialPort()
##P3 t=295: SerialPort::closeDev() for FD 15
##P5 t=295: 0xbfc1b8ac = Query::setSerial((nil))
##P3 t=295: TempSerialPort::TempSerialPort()
##P5 t=295: (nil) = Query::setSerial(0xbfc1b8ac)
##P5 t=295: - testing baud rate 9600 bps
##P6 t=295: dosmallsleep of 0 s, 200000 us
##P3 t=295: Opened '/dev/ttyUSB0' as FD 15
##P5 t=295: Query instance 0xbfc1b894 acquired MUTEX
##P5 t=295: receiveString: '(null)'
##P4 t=295: Query sends the following mesage: 'AT'
##P6 t=295: dosmallsleep of 0 s, 5000 us
##P6 t=295: dosmallsleep of 0 s, 5000 us
##P6 t=295: dosmallsleep of 0 s, 5000 us
##P6 t=295: dosmallsleep of 0 s, 5000 us
##P5 t=295: receiveString: '(null)'
##P5 t=295: Query instance 0xbfc1b894 abandoned MUTEX
##P3 t=295: TempSerialPort::~TempSerialPort()
##P3 t=295: SerialPort::closeDev() for FD 15
##P5 t=295: 0xbfc1b8ac = Query::setSerial((nil))
##P5 t=295: - probing for AT on device: /dev/ttyUSB1
##P3 t=295: TempSerialPort::TempSerialPort()
##P5 t=295: (nil) = Query::setSerial(0xbfc1b8ac)
##P5 t=295: - testing baud rate 115200 bps
##P6 t=295: dosmallsleep of 0 s, 200000 us
##P3 t=295: Opened '/dev/ttyUSB1' as FD 15
##P5 t=295: Query instance 0xbfc1b894 acquired MUTEX
##P5 t=295: receiveString: '(null)'
##P4 t=295: Query sends the following mesage: 'AT'
##P6 t=295: dosmallsleep of 0 s, 5000 us
##P6 t=295: dosmallsleep of 0 s, 10000 us
##P4 t=295: write 'A' failed for the 1 time, myResult = -1
##P6 t=295: dosmallsleep of 0 s, 10000 us
##P4 t=295: write 'A' failed for the 2 time, myResult = -1
##P6 t=295: dosmallsleep of 0 s, 10000 us
##P4 t=295: write 'A' failed for the 3 time, myResult = -1
##P6 t=295: dosmallsleep of 0 s, 10000 us
##P4 t=295: write 'A' failed for the 4 time, myResult = -1
##P6 t=295: dosmallsleep of 0 s, 10000 us
##P4 t=295: write 'A' failed for the 5 time, myResult = -1
##P6 t=295: dosmallsleep of 0 s, 10000 us
##P4 t=295: write 'A' failed for the 6 time, myResult = -1
##P6 t=295: dosmallsleep of 0 s, 10000 us
##P4 t=295: write 'A' failed for the 7 time, myResult = -1
##P6 t=295: dosmallsleep of 0 s, 10000 us
##P4 t=295: write 'A' failed for the 8 time, myResult = -1
##P6 t=295: dosmallsleep of 0 s, 10000 us
##P4 t=295: write 'A' failed for the 9 time, myResult = -1
##P6 t=295: dosmallsleep of 0 s, 10000 us
##P4 t=295: write 'A' failed for the 10 time, myResult = -1
##P6 t=295: dosmallsleep of 0 s, 10000 us
##P3 t=295: SerialPort::closeDev() for FD 15
Could not write to serial device: Die Ressource ist zur Zeit nicht verfügbar
##P1 t=295: *** CRITICAL ERROR: Kann nicht (mehr) auf das Ger�t schreiben
DCOPClient::attachInternal. Attach failed Could not open network socket
DCOPClient::attachInternal. Attach failed Could not open network socket
*** umtsmon version 0.9.50-20081117 closed due to an unrecoverable program error.
*** Please e-mail all of the above output to umtsmon-develop@lists.sourceforge.net,
*** Or go to the umtsmon website and file a bug.
##P1 t=297: Critical Popup - application will halt
##P5 t=297: DESTRUCTOR TheSettingsSingleton::~TheSettingsSingleton()
##P5 t=297: DESTRUCTOR TheDeviceManagerSingleton::~TheDeviceManagerSingleton()
Mutex destroy failure: Das Gerät oder die Ressource ist belegt
Do you think it's a problem of umtsmon now? Because the device files /dev/ttyUSB* are available now.
Thanks a lot in advance for your support.
Sebastian
-
Josh
- Site Admin
- Posts: 6593
- Joined: 03 Nov 2007, 00:30
Post
by Josh » 09 Mar 2010, 09:27
Hmm, switching seems to be fine now but the right driver is missing. USB_ModeSwitch will load the "option" driver only if no other driver jumps in automatically.
With newer "Option" devices, a different driver is needed. It's already included in newer kernels (since 2.6.27) but might be missing on your machine.
Look for the "hso" module (modprobe -v hso). If you don't find it in your distribution/kernel, see the doc page in paragraph "Known working hardware". In the remark about "Option" devices, there are links to the HSO site.
-
rienesl
- Posts: 1
- Joined: 23 Mar 2026, 09:43
Post
by rienesl » 23 Mar 2026, 10:05
Hello everyone.
I know, this thing is from the stone age and yes, I am using a stone age card on stone age hardware (IBM X30) with a stone age dustro (Xubuntu 16.04.7).
So when I try to run "usb_modeswitch -I -W -c 0af0.7381" (yes, I named the file after the USB), it returns
...
Look for target devices ...
...
Found USB ID 0af0:7381
Vendor ID matched
...
No devices in default target mode or class found
Look for default devices
...
Found USB ID 0af0:7381
vendor ID matched
product ID matched
target class ff matches
device not counted, target class reached
...
No devices in default mode found. Nothing to do. Bye!
If I run the thing with any other target class, it complains, that the card is not in class 8 and therefore can do nothing. Worth to note, that all of this happens even after inserting or a fresh reboot. So why is it already in 0xff, and if this is perfectly fine, how to get the ttyUSB* devices?
(I am not that super brain in Linux, however I usually get somehow to the point, that I can use it for whatever I want to do. The previous posts were a bit difficult for me to follow, as only the outputs of the commands were posted, but not the command itself, which took me quite a while to figure them out)
-
Josh
- Site Admin
- Posts: 6593
- Joined: 03 Nov 2007, 00:30
Post
by Josh » 30 Mar 2026, 18:06
Are you sure that usb_modeswitch hasn't run already after you inserted the device?
Check the output of "dmesg" repeatedly immediately after plug in.
As for the interfaces created, the information in this thread applies. You won't get ttyUSBx but ttyHSx, provided that the "hso" driver module is present. See my post right above yours.
|
|
