The C Source, Patches and (shudder!) Bugs
Post Reply
tuomas
Posts: 3
Joined: Mon Nov 15, 2010 2:53 am

alink 3g turbo modem fails with fedora 14

Post by tuomas » Tue Nov 16, 2010 9:47 am

Hello,

I don't know what to do because the same modem is working on one fedora 14 machine but doesn't work in other.

both machines has fresh fedora 14 all updates done.

Her is same data:

usb_modeswitch-1.1.4-1.fc14
usb_modeswitch-data-20100817-1.fc14
kernel-2.6.35.6-48.fc14
udev-161-4.fc14

and demsg

[root@localhost koti]# dmesg
[ 864.244053] usb 2-1: new high speed USB device using ehci_hcd and address 7
[ 864.360274] usb 2-1: New USB device found, idVendor=1e0e, idProduct=f000
[ 864.360278] usb 2-1: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 864.360281] usb 2-1: Product: A-Link
[ 864.360283] usb 2-1: Manufacturer: A-Link
[ 864.367369] scsi6 : usb-storage 2-1:1.0
[ 865.233585] usb 2-1: USB disconnect, address 7
[ 865.543049] usb 2-1: new high speed USB device using ehci_hcd and address 8
[ 866.322037] usb 2-1: device not accepting address 8, error -71
[ 866.373287] hub 2-0:1.0: unable to enumerate USB device on port 1

-Tuomas-

tuomas
Posts: 3
Joined: Mon Nov 15, 2010 2:53 am

Post by tuomas » Tue Nov 16, 2010 10:03 am

I just tested and noticed that modem is working when I put it to computer before turning computer on??

-Tuomas-

tuomas
Posts: 3
Joined: Mon Nov 15, 2010 2:53 am

Post by tuomas » Tue Nov 16, 2010 10:04 am

I just tested and noticed that modem is working when I put it to computer before turning computer on??

-Tuomas-

Josh
Site Admin
Posts: 6545
Joined: Sat Nov 03, 2007 12:30 am

Post by Josh » Wed Nov 17, 2010 12:03 pm

After a short Google search I found this:
http://www.linux-usb.org/FAQ.html#ts6

Maybe that can give you a clue?

Post Reply