PPP Widget 3 Connect but no internet
Posted: 25 Jan 2020, 08:43
Hello, im glad to know theres forum for help me solve my problems.
i have Phoenix OS that runs android 7.1. I want to connect my android to the internet with my usb modem : Huawei E-3276 so i intall PPP widget 3. everything works like charm. fyi i can connect in linux and surf the internet nicely, but in android i cant. my modem is detected by ppp widget and connect. but cant access internet at all, i tried ping directly to IP address but not work.
this is ppp log.
and this is USB log
glad to see my problem solved
thanks in advance
i have Phoenix OS that runs android 7.1. I want to connect my android to the internet with my usb modem : Huawei E-3276 so i intall PPP widget 3. everything works like charm. fyi i can connect in linux and surf the internet nicely, but in android i cant. my modem is detected by ppp widget and connect. but cant access internet at all, i tried ping directly to IP address but not work.
this is ppp log.
Code: Select all
Jan 24, 2020 03:18:10
Total RAM: 5656 MB. Available RAM: 3638 MB
Starting modem command sequence (Init) ...
>
ATE0
<
OK
>
AT+CGSN
<
867497010821387
OK
--> Using device profile 867497010821387
>
AT+CIMI
<
510102572902114
OK
--> Using parameter profile 510102572902114
SIM is ready to use
====
Jan 24, 2020 03:21:24
Total RAM: 5656 MB. Available RAM: 3027 MB
Starting modem command sequence (Dial) ...
>
AT+CFUN?
<
+CFUN: 1
OK
>
AT^NDISDUP=1,1,"internet"
<
OK
>
AT_WAIT_IRQ
<
IRQ OK
====
Dialling complete
====
Dialling complete
Starting DHCP request ...
> Phase 3
ffffffffffff0c5b8f279a64080045100148000000008011399600000000ffffffff004400430134
<
ffffffffffff4c549945e5d50800450001160000000080117a250ac9b4e9ffffffff004300440102
NAK received
> Phase 1
ffffffffffff0c5b8f279a64080045100148000000008011399600000000ffffffff004400430134
<
ffffffffffff4c549945e5d508004500013a0001000080117a000ac9b4e9ffffffff004300440126
OFFER received
> Phase 3
4c549945e5d50c5b8f279a64080045100148000000008011399600000000ffffffff004400430134
<
ffffffffffff4c549945e5d508004500013a00020000801179ff0ac9b4e9ffffffff004300440126
ACK received
> Phase 9
ffffffffffff0c5b8f279a64080600010800060400010c5b8f279a640ac9b4ea0000000000000ac9
< (ARP, connection confirmed)
0c5b8f279a644c549945e5d5080600010800060400024c549945e5d50ac9b4e90c5b8f279a640ac9
Local IP: 10.201.180.234/30
Peer IP: 10.201.180.233
DNS1: 192.168.98.28
DNS2:
Send initial IP packet ...
End of DHCP negotiation
VPN setup complete
VPN network device is up
Jan 24, 2020 03:23:46
Total RAM: 5656 MB. Available RAM: 2951 MB
First IP packet received - we are online
Network notification seems to have failed,
limited network access
Connection is ready
Code: Select all
Jan 24, 2020 02:53:44
Device manufacturer string: ASUSTeK COMPUTER INC.
Total RAM: 5656 MB. Available RAM: 3327 MB
New device on /dev/bus/usb/002/007
Class of interface 0 is 0xFF
Looking at USB device 12d1:1506 with class 255
Device top dir: /sys/bus/usb/devices/2-1, active cfg: 1
Active configuration ID: 1
Device layout (config 1) - cl:00 sc:00 pr:00
if:0 as:0 - cl:ff sc:02 pr:10 - ir:81 bi:82 bo:01
if:1 as:0 - cl:ff sc:02 pr:12 - bi:83 bo:02
if:2 as:0 - cl:ff sc:02 pr:16 - ir:84
if:2 as:1 - cl:ff sc:02 pr:16 - ir:84 bi:85 bo:03
if:3 as:0 - cl:08 sc:06 pr:50 - bo:04 bi:86
if:4 as:0 - cl:08 sc:06 pr:50 - bo:05 bi:87
Found 2 serial ports
Disable kernel USB power-save, as set in app config
Opening port type HUAWEI_NCM (interface 2)
thanks in advance