[solved]shenzhenstrongrising21f5:2008chinatelcomqualcom usb
subject: shenzhen strong rising usb modem (=qualcomm in windows)
installed all package
3G_pupdial-12_patch_to_P4
modem_fix_pack_to_431-6
modem_ti_qc_ipwi_updates-6
option-patched-01April09-k2
pup_event_backend_modprobe_fix_to_p43x-4
usb-modeswitch-1
not installed but have
would i install this for version compliance ?
usb_modeswitch-0.9.5.pet
Hardware info
machine details-
intel motherboard processor pentium 4 memory 512 mb used 147mb puppy linux 0.43 audio adapter 82891db-ich4 intel x11 vendor x.org kernel linux 2.6.30.5(i686)compiled #1 smp gnu clibrary version 2.6.1 stable default c compiler unknown desktop environment unknown (window manager jwm) kernel moduls - lp, snd_pcm_oss,snd_seq_dummy,snd_seq_oss,..,slamr.......usbcore ehci_hcd,uhci_hcd,squashfs,usb_storage ,usbhid
here is qualcomm based modem in usb device product id 0x1000
usb devices -uhci host controller -strong rising co. manufacturer -qualcomm, incorporated port#1 speed 12.00 Mb/s max current 100mA usb version 1.10 revision 0.00 product id 0x1000 bus 4 level 1
here is storage cdrom stronrising co
storage -ata maxtor 2f040l0, tsstcorp cd/dvdw sh-s182d,cd rom strongrising co vendor produt strongrising co revision 2.31 scsi controller scsi3
/proc/bus/usb/device
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=21f5 ProdID=1000 Rev= 0.00
S: Manufacturer=Qualcomm, Incorporated
S: Product=StrongRising.CO
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
dmesg-
usb 4-2:usb disconnect,address 2
:new full speed usb device using uhci_hcd and address 3
:configuration #1 chosen from 1 choice
scsi4: scsi emulation for usb mass storage devices
usb-storage:device found at 3
usb-storage:waiting for device to settle before scanning
scsi4:0:0:0: cd-rom strongrising.co 2.31 pq: 0 ansi:2
sr1: scsi-1 drive
sr 4:0:0:0 Attached scsi cd-rom sr1
usb-storage:device scan complete
sr1:Hmm,seems the drive doesn't support multisession cd's
usb 4-2:reset full speed usb device using uhci_hcd and address 3
usbserial:`'invalid for parameter`vendor'
what i am going to edit usb_modeswitch.conf but dont understand well.
Here are log files of usbview from microsoft and usbsnoop sniff usb in same name .
I have device reference txt file which could be wrong so please correct .
three usbsnoop.log are created by usbsniff 2.0 tool in 15 minutes and i copied them name them 1,2,3 and in usbsnoop dir now.
I have puppy 4.3.1.sfs but no kernel source no make no gcc.
my request is for following package.
1) udev pet package
2)lsusb pet
3)0zerocdoff pet
About strong rising modem -it has 2 ic chips inside .one near usb socket port is samsung and in center is qualcomm msm6500
samsung chip 816 ,k5D5657ACB-D090, AQB958FA
qualcomm chip MsM 6500 , cp 90-v3195-8 ,H21098.1 ,p16643.00,43TZDH-0003,D643 A
In windows it installs modem driver in first found, i can see drivers inside and copy to d: drive,later on I cant see internal files but they are qualcomm i already copied. later each time chinatelcom connection interface will come it has 3 options 1) china TELCOM HIGH SPEED WIFI 2)china TELCOM EVDO 3)china TELCOM CDMA. in my account option call #777 user name :account name ,password :password In windows if i change dns server in tcp ip ,speed in network setting it set to dfault setting each time it runs,connects diffrerent ips in china with tcp and udp, it has its own nameserver connection with 211.141.90.68 seen from comodo firewall, network miner, dnsspeeder, tcp view.in process list seen from procexplorer c+wdetect.exe which detects at xp startup, c+wlink.exe which dials links connects does every frontend.
oem info
http://pastebin.com/JeHpH7G6
modemuser.inf in windows
http://pastebin.com/Ct0V8ALa
modem.inf in windows.
http://pastebin.com/Z7XuxfRS[url][/url]
homepage
http://cwclient.vnet.cn/
www.ct10000.com
installed all package
3G_pupdial-12_patch_to_P4
modem_fix_pack_to_431-6
modem_ti_qc_ipwi_updates-6
option-patched-01April09-k2
pup_event_backend_modprobe_fix_to_p43x-4
usb-modeswitch-1
not installed but have
would i install this for version compliance ?
usb_modeswitch-0.9.5.pet
Hardware info
machine details-
intel motherboard processor pentium 4 memory 512 mb used 147mb puppy linux 0.43 audio adapter 82891db-ich4 intel x11 vendor x.org kernel linux 2.6.30.5(i686)compiled #1 smp gnu clibrary version 2.6.1 stable default c compiler unknown desktop environment unknown (window manager jwm) kernel moduls - lp, snd_pcm_oss,snd_seq_dummy,snd_seq_oss,..,slamr.......usbcore ehci_hcd,uhci_hcd,squashfs,usb_storage ,usbhid
here is qualcomm based modem in usb device product id 0x1000
usb devices -uhci host controller -strong rising co. manufacturer -qualcomm, incorporated port#1 speed 12.00 Mb/s max current 100mA usb version 1.10 revision 0.00 product id 0x1000 bus 4 level 1
here is storage cdrom stronrising co
storage -ata maxtor 2f040l0, tsstcorp cd/dvdw sh-s182d,cd rom strongrising co vendor produt strongrising co revision 2.31 scsi controller scsi3
/proc/bus/usb/device
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=21f5 ProdID=1000 Rev= 0.00
S: Manufacturer=Qualcomm, Incorporated
S: Product=StrongRising.CO
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
dmesg-
usb 4-2:usb disconnect,address 2
:new full speed usb device using uhci_hcd and address 3
:configuration #1 chosen from 1 choice
scsi4: scsi emulation for usb mass storage devices
usb-storage:device found at 3
usb-storage:waiting for device to settle before scanning
scsi4:0:0:0: cd-rom strongrising.co 2.31 pq: 0 ansi:2
sr1: scsi-1 drive
sr 4:0:0:0 Attached scsi cd-rom sr1
usb-storage:device scan complete
sr1:Hmm,seems the drive doesn't support multisession cd's
usb 4-2:reset full speed usb device using uhci_hcd and address 3
usbserial:`'invalid for parameter`vendor'
what i am going to edit usb_modeswitch.conf but dont understand well.
Here are log files of usbview from microsoft and usbsnoop sniff usb in same name .
I have device reference txt file which could be wrong so please correct .
three usbsnoop.log are created by usbsniff 2.0 tool in 15 minutes and i copied them name them 1,2,3 and in usbsnoop dir now.
I have puppy 4.3.1.sfs but no kernel source no make no gcc.
my request is for following package.
1) udev pet package
2)lsusb pet
3)0zerocdoff pet
About strong rising modem -it has 2 ic chips inside .one near usb socket port is samsung and in center is qualcomm msm6500
samsung chip 816 ,k5D5657ACB-D090, AQB958FA
qualcomm chip MsM 6500 , cp 90-v3195-8 ,H21098.1 ,p16643.00,43TZDH-0003,D643 A
In windows it installs modem driver in first found, i can see drivers inside and copy to d: drive,later on I cant see internal files but they are qualcomm i already copied. later each time chinatelcom connection interface will come it has 3 options 1) china TELCOM HIGH SPEED WIFI 2)china TELCOM EVDO 3)china TELCOM CDMA. in my account option call #777 user name :account name ,password :password In windows if i change dns server in tcp ip ,speed in network setting it set to dfault setting each time it runs,connects diffrerent ips in china with tcp and udp, it has its own nameserver connection with 211.141.90.68 seen from comodo firewall, network miner, dnsspeeder, tcp view.in process list seen from procexplorer c+wdetect.exe which detects at xp startup, c+wlink.exe which dials links connects does every frontend.
oem info
http://pastebin.com/JeHpH7G6
modemuser.inf in windows
http://pastebin.com/Ct0V8ALa
modem.inf in windows.
http://pastebin.com/Z7XuxfRS[url][/url]
homepage
http://cwclient.vnet.cn/
www.ct10000.com
Last edited by bijendra on 30 Mar 2012, 09:49, edited 12 times in total.
strongrising usbview.log
lsusb -v
Bus 004 Device 003:ID 21f5:1000
Device Descriptor:
blength 18
bDescriptor Type 1
bcdUSB 1.10
bDeviceClass 0(Defined at Interface level)
bDevice subclass 0
bMaxpacketsize0 64
idvendor 0x21f5
idproduct 0x1000
bcddevice 0.00
iManufacturer 1 qualcomm,incorporated
iproduct 2stronrising.co
iserial 0
bnumconfigurations1
configuration descriptor:
blength 9 bdescriptortype 2 wtotallength 32 bnuminterfaces 1 bconfigurationvalue 1 iconfiguration 0 bmattributes 0xe9 self powerd remote wakeup maxpower 100mA
interface descriptor:
blength 9 bdescriptor type 4 binterfacenumber 0 baltermatesetting 0 bnumendpoints 2 binterfaceclass 8 mass storage binterfacesubclass 6 scsi binterfaceprotocol 80 bulk (zip) iinterface 0
endpoit descriptor:
blength 7 bdescriptortype 5 bendpointaddress 0x85 ep 5 in bmattribues 2 transfer type bulk synch type none usage type data wmaxpacketsize 0x0040 1x64 bytes binterval
endpoint descriptor:
blength 7 bdescriptortype 5 bendpointaddress 0x05 ep 5 out bmattributes 2 transfer type bulk synch type none usage type data wmaxpacketsize 0x0040 1x64 bytes binterval 0
device status: 0x0000 (bus powerd)
Bus 004 Device 003:ID 21f5:1000
Device Descriptor:
blength 18
bDescriptor Type 1
bcdUSB 1.10
bDeviceClass 0(Defined at Interface level)
bDevice subclass 0
bMaxpacketsize0 64
idvendor 0x21f5
idproduct 0x1000
bcddevice 0.00
iManufacturer 1 qualcomm,incorporated
iproduct 2stronrising.co
iserial 0
bnumconfigurations1
configuration descriptor:
blength 9 bdescriptortype 2 wtotallength 32 bnuminterfaces 1 bconfigurationvalue 1 iconfiguration 0 bmattributes 0xe9 self powerd remote wakeup maxpower 100mA
interface descriptor:
blength 9 bdescriptor type 4 binterfacenumber 0 baltermatesetting 0 bnumendpoints 2 binterfaceclass 8 mass storage binterfacesubclass 6 scsi binterfaceprotocol 80 bulk (zip) iinterface 0
endpoit descriptor:
blength 7 bdescriptortype 5 bendpointaddress 0x85 ep 5 in bmattribues 2 transfer type bulk synch type none usage type data wmaxpacketsize 0x0040 1x64 bytes binterval
endpoint descriptor:
blength 7 bdescriptortype 5 bendpointaddress 0x05 ep 5 out bmattributes 2 transfer type bulk synch type none usage type data wmaxpacketsize 0x0040 1x64 bytes binterval 0
device status: 0x0000 (bus powerd)
Last edited by bijendra on 11 Dec 2011, 09:11, edited 1 time in total.
I can't make very much sense of your posting. It would have been better to start with fewer printouts, usually I'm asking back for additional information. Also, this forum is not suited for long log files. Use "pastebin.com" or similar sites for that.
For a start, don't use /etc/usb_modeswitch.conf for device configurations !! It's a global config file.
Did you read any of the information on the main doc page or in the README files of the source packages?
You don't need a compiler for that.
Regarding your device: the "lsusb" ouput you posted shows that the device is in modem mode. So it has been mode-switched. I suppose the "option" module is present in Murga Linux, so you can try to use it with the following lines (as root or with "sudo"):
For a start, don't use /etc/usb_modeswitch.conf for device configurations !! It's a global config file.
Did you read any of the information on the main doc page or in the README files of the source packages?
You don't need a compiler for that.
Regarding your device: the "lsusb" ouput you posted shows that the device is in modem mode. So it has been mode-switched. I suppose the "option" module is present in Murga Linux, so you can try to use it with the following lines (as root or with "sudo"):
Code: Select all
# modprobe -v option
# echo "<your-vendor-ID> <your-product-ID>" > /sys/bus/usb-serial/drivers/option1/new_id
With usb_modeswitch0.9.5
usb_set_debug:setting debugging level to 15 (on)
usb_os_find_busses:found 004
usb_os_find_busses:found 003
usb_os_find_busses:found 002
usb_os_find_busses:found 001
usb_os_find_busses: skipping non bus directory devices
usb_os_find_devices:found 002 on 004
usb_os_find_devices:found 001 on 004
error obtaining child information: inappropriat ioctl for device
usb_os_find_devices:found 001 on 003
usb_os_find_devices:found 001 on 002
usb_os_find_devices:found 001 on 001
looking for target devices
no target device found
looking for default devices
no default devices found
is it connected? bye
dmesg-
PPP generic driver version 2.4.2
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26: Usb abstract control model driver for usb modems and isdn adapters
usbcore: registered new interface driver usbserial
usb serial support registerd for generic
usbcore: registered new interface driver usbserial_generic
usbserial: usb serial driver core
lsmod -
usbserial
cdc_acm
Code: Select all
#usb_modeswitch -W
DefaultVendor= 0x21f5
DefaultProduct= 0x2008
TargetVendor= 0x21f5
TargetProduct= 0x2008 ,0x2009, 0x2010
huaweimode=0
MessageEndpoint=0x05
MessageContent="5553424308b0a7822400000080000612000000240000000000000000000000"
#correct this with 555342430850e782c000000080000671010000000000000000000000000000
usb_os_find_busses:found 004
usb_os_find_busses:found 003
usb_os_find_busses:found 002
usb_os_find_busses:found 001
usb_os_find_busses: skipping non bus directory devices
usb_os_find_devices:found 002 on 004
usb_os_find_devices:found 001 on 004
error obtaining child information: inappropriat ioctl for device
usb_os_find_devices:found 001 on 003
usb_os_find_devices:found 001 on 002
usb_os_find_devices:found 001 on 001
looking for target devices
no target device found
looking for default devices
no default devices found
is it connected? bye
dmesg-
PPP generic driver version 2.4.2
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26: Usb abstract control model driver for usb modems and isdn adapters
usbcore: registered new interface driver usbserial
usb serial support registerd for generic
usbcore: registered new interface driver usbserial_generic
usbserial: usb serial driver core
lsmod -
usbserial
cdc_acm
Code: Select all
Last edited by bijendra on 06 Jan 2012, 01:55, edited 2 times in total.
usbsnoob.log
here another
message content="55 53 42 43 d0 1a be 82 24 00 00 00 80 00 06 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00"
message content="55 53 42 43 d0 1a be 82 24 00 00 00 80 00 06 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00"
Last edited by bijendra on 30 Mar 2012, 09:44, edited 3 times in total.
this is usbsnoob2.00 or usbsniff tool latest old version usbsniff1.08 flickers
USB\ROOT_HUB&VID8086&PID24C2&REV001 USBROOT HUB YES
USB\ROOT_HUB&VID8086&PID24C4&REV001 USBROOT HUB YES
USB\ROOT_HUB&VID8086&PID24C7&REV001 USBROOT HUB YES
USB\ROOT_HUB20&VID8086&PID24C2&REV001 USBROOT HUB YES
USB\VID_0951&PID_1624&REV_0110 USB MASS STORAGE DEVICE NO
USB\VID_1058&PID_1010&REV_0175 USB MASS STORAGE DEVICE NO
USB\VID_21F5&PID_1000&REV_0000 USB MASS STORAGE DEVICE NO
USB\VID_21F5&PID_10008&REV_0000 USB MASS STORAGE DEVICE NO
USB\VID_21F5&PID_1000&REV_0000 USB MASS STORAGE DEVICE NO
USB\VID_21F5&PID_2008&REV_0000 USB COMPOSITE DEVICE NO
USB\VID_21F5&PID_2008&REV_0000 USB COMPOSITE DEVICE NO
USB\VID_21F5&PID_2008&REV_0000 USB COMPOSITE DEVICE YES
USB\VID_21F5&PID_2008&REV_0000&MI_00 STRONGRISING USB MODEM YES
USB\VID_21F5&PID_2008&REV_0000&MI_00 STRONGRISING USB MODEM no
USB\VID_21F5&PID_2008&REV_0000&MI_00 STRONGRISING USB MODEM no
USB\VID_21F5&PID_2008&REV_0000&MI_01 STRONGRISING DM SERVICE PORT YES
USB\VID_21F5&PID_2008&REV_0000&MI_01 STRONGRISING DM SERVICE PORT NO
USB\VID_21F5&PID_2008&REV_0000&MI_01 STRONGRISING DM SERVICE PORT NO
USB\VID_21F5&PID_2008&REV_0000&MI_02 STRONGRISING VOICE DEVICE PORT YES
USB\VID_21F5&PID_2008&REV_0000&MI_02 STRONGRISING VOICE DEVICE PORT NO
USB\VID_21F5&PID_2008&REV_0000&MI_02 STRONGRISING VOICE DEVICE PORT NO
USB\VID_21F5&PID_2008&REV_0000&MI_03 STRONGRISING COMMAND CONTROL PORT YES
USB\VID_21F5&PID_2008&REV_0000&MI_03 STRONGRISING COMMAND CONTROL PORT NO
USB\VID_21F5&PID_2008&REV_0000&MI_03 STRONGRISING COMMAND CONTROL PORT NO
INSTALL filter on strong rising usb mode all three
yes installed
no installed
no installed
installed filter on usb composite device all three
yes,no,no all three installed
during sniffing plug unplug replug while china telcom interface pops out detect modem sniff data is at that event.
USB\ROOT_HUB&VID8086&PID24C2&REV001 USBROOT HUB YES
USB\ROOT_HUB&VID8086&PID24C4&REV001 USBROOT HUB YES
USB\ROOT_HUB&VID8086&PID24C7&REV001 USBROOT HUB YES
USB\ROOT_HUB20&VID8086&PID24C2&REV001 USBROOT HUB YES
USB\VID_0951&PID_1624&REV_0110 USB MASS STORAGE DEVICE NO
USB\VID_1058&PID_1010&REV_0175 USB MASS STORAGE DEVICE NO
USB\VID_21F5&PID_1000&REV_0000 USB MASS STORAGE DEVICE NO
USB\VID_21F5&PID_10008&REV_0000 USB MASS STORAGE DEVICE NO
USB\VID_21F5&PID_1000&REV_0000 USB MASS STORAGE DEVICE NO
USB\VID_21F5&PID_2008&REV_0000 USB COMPOSITE DEVICE NO
USB\VID_21F5&PID_2008&REV_0000 USB COMPOSITE DEVICE NO
USB\VID_21F5&PID_2008&REV_0000 USB COMPOSITE DEVICE YES
USB\VID_21F5&PID_2008&REV_0000&MI_00 STRONGRISING USB MODEM YES
USB\VID_21F5&PID_2008&REV_0000&MI_00 STRONGRISING USB MODEM no
USB\VID_21F5&PID_2008&REV_0000&MI_00 STRONGRISING USB MODEM no
USB\VID_21F5&PID_2008&REV_0000&MI_01 STRONGRISING DM SERVICE PORT YES
USB\VID_21F5&PID_2008&REV_0000&MI_01 STRONGRISING DM SERVICE PORT NO
USB\VID_21F5&PID_2008&REV_0000&MI_01 STRONGRISING DM SERVICE PORT NO
USB\VID_21F5&PID_2008&REV_0000&MI_02 STRONGRISING VOICE DEVICE PORT YES
USB\VID_21F5&PID_2008&REV_0000&MI_02 STRONGRISING VOICE DEVICE PORT NO
USB\VID_21F5&PID_2008&REV_0000&MI_02 STRONGRISING VOICE DEVICE PORT NO
USB\VID_21F5&PID_2008&REV_0000&MI_03 STRONGRISING COMMAND CONTROL PORT YES
USB\VID_21F5&PID_2008&REV_0000&MI_03 STRONGRISING COMMAND CONTROL PORT NO
USB\VID_21F5&PID_2008&REV_0000&MI_03 STRONGRISING COMMAND CONTROL PORT NO
INSTALL filter on strong rising usb mode all three
yes installed
no installed
no installed
installed filter on usb composite device all three
yes,no,no all three installed
during sniffing plug unplug replug while china telcom interface pops out detect modem sniff data is at that event.
Last edited by bijendra on 20 Dec 2011, 10:14, edited 3 times in total.
AS per help arrive from rerwin @www.murga-linux.com this vendor id created /etc/usb/modeswitch.d/21f5:1000 text file
inastalled upgrade_pack_4.3.1.1-20110905.pet for puppy 4.3.1 with buit in usb_modeswith1.1.9
########################################################
Place that text into a file in /etc/usb_modeswitch.d/ and name it:
21f5:1000
Also create a rules file to invoke usb_modeswitch, in /etc/udev/rules.d/, named:
40-usb_modeswitch-airflash-sx0301.rules
inastalled upgrade_pack_4.3.1.1-20110905.pet for puppy 4.3.1 with buit in usb_modeswith1.1.9
########################################################
Code: Select all
# Air FlexiNet using Flash SX0301
DefaultVendor= 0x21f5
DefaultProduct= 0x1000
TargetVendor= 0x21f5
TargetProduct= 0x2008 ,0x2009, 0x2010
MessageEndpoint=0x05
MessageContent="5553424308b0a7822400000080000612000000240000000000000000000000"
#please corrected message content 555342430850e782c000000080000671010000000000000000000000000000
21f5:1000
Also create a rules file to invoke usb_modeswitch, in /etc/udev/rules.d/, named:
40-usb_modeswitch-airflash-sx0301.rules
Code: Select all
ACTION=="add|change", SUBSYSTEM=="usb", ATTRS{bInterfaceNumber}=="0[059]", ATTRS{bDeviceClass}=="08", GOTO="modeswitch_rules_begin"
ACTION=="add|change", SUBSYSTEM=="usb", ATTRS{bInterfaceNumber}=="0[059]", ATTRS{bInterfaceClass}=="0[38]", GOTO="modeswitch_rules_begin"
GOTO="modeswitch_rules_end"
LABEL="modeswitch_rules_begin"
# Air FlexiNet using Flash SX0301
ATTRS{idVendor}=="21f5", ATTRS{idProduct}=="1000", RUN+="usb_modeswitch '%b/%k'"
LABEL="modeswitch_rules_end"
Last edited by bijendra on 06 Jan 2012, 01:58, edited 3 times in total.
ls -l /dev/ttyUSB*
/dev/ttyusb0 ->usb/ttyusb0
/dev/ttyusb1 ->usb/ttyusb1
/dev/ttyusb0 ->usb/ttyusb0
/dev/ttyusb1 ->usb/ttyusb1
Last edited by bijendra on 17 Dec 2011, 09:49, edited 1 time in total.
usb_modeswitch version 1.1.9
usb_modeswitch -c /etc/u.conf
looking for target devices....
no devices in target mode or class found
looking for default devices...
found devices in default mode , class or configuration(1)
accessing the current device configuration...
ok, got current device configuration(1)
inquiring device details; driver will be detached....
looking for active driver ...
no driver found. either detached before or never attached
scsi inquiry data (for identification)
--------------------------------------
vendor string:cdrom
model string: strongrising co
revision string: 2.31
usb description data(for identification)
---------------------------------------
manufacturer: Qualcom,Incorporated
product:strongrising.co
serialno: not provided
_______________________________-
setting up communication with interface 0
using endpoint 0X05 for message sending....
trying to send message 1 to endpoint 0x05.........
ok. message successfully sent
resetting response endpoint 0x85
resetting message endpoint 0x05
checking for mode switch (max.20 times , once per second) ...
searching for target devices...
searching for target devices...
mode switch has failed .bye.
usb_modeswitch -c /etc/u.conf
looking for target devices....
no devices in target mode or class found
looking for default devices...
found devices in default mode , class or configuration(1)
accessing the current device configuration...
ok, got current device configuration(1)
inquiring device details; driver will be detached....
looking for active driver ...
no driver found. either detached before or never attached
scsi inquiry data (for identification)
--------------------------------------
vendor string:cdrom
model string: strongrising co
revision string: 2.31
usb description data(for identification)
---------------------------------------
manufacturer: Qualcom,Incorporated
product:strongrising.co
serialno: not provided
_______________________________-
setting up communication with interface 0
using endpoint 0X05 for message sending....
trying to send message 1 to endpoint 0x05.........
ok. message successfully sent
resetting response endpoint 0x85
resetting message endpoint 0x05
checking for mode switch (max.20 times , once per second) ...
searching for target devices...
searching for target devices...
mode switch has failed .bye.
Please don't sent personal messages with new log data. Post it in this forum topic.
I'm still not entirely sure what you are trying to achieve. I'll try to guess and wrap it up:
You have a new modem device with the USB ID 21f5:1000 and showing up as a storage device, with the Windows driver included on that storage. Now you are trying to switch the mode to "modem".
The "MessageContent" that you are using will not work. It's just a command to read the device description text.
When looking at your sniffing log, the commands sent just before "SURPRISE_REMOVAL" are the most suspicious.
i would try this one:A question:
How do you know that the target ID for the modem mode is "21f5:2008"? Did you find this in Windows?
I'm still not entirely sure what you are trying to achieve. I'll try to guess and wrap it up:
You have a new modem device with the USB ID 21f5:1000 and showing up as a storage device, with the Windows driver included on that storage. Now you are trying to switch the mode to "modem".
The "MessageContent" that you are using will not work. It's just a command to read the device description text.
When looking at your sniffing log, the commands sent just before "SURPRISE_REMOVAL" are the most suspicious.
i would try this one:
Code: Select all
555342430850e782c000000080000671010000000000000000000000000000
How do you know that the target ID for the modem mode is "21f5:2008"? Did you find this in Windows?
usb mode is successfully switched with above message content still endpoint uncorrelates . error endpoint(1) endpoint(2) harmless something like that.
sending usbview.log in paste bin http://pastebin.com/A7BJXErv from windows to check end point
this is latest lsusb -v switched 21f5:2008 from 21f5:1000
this is in windows xp with usbview microsoft tool
found end points
http://pastebin.com/A7BJXErv
sending usbview.log in paste bin http://pastebin.com/A7BJXErv from windows to check end point
this is latest lsusb -v switched 21f5:2008 from 21f5:1000
Code: Select all
lsusb -v |grep "">file.txt
Bus 004 Device 005: ID 21f5:2008
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x21f5
idProduct 0x2008
bcdDevice 0.00
iManufacturer 1 Qualcomm, Incorporated
iProduct 2 StrongRising Technologies MSM
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 108
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3 StrongRising
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 128
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3 StrongRising
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3 StrongRising
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3 StrongRising
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
this is in windows xp with usbview microsoft tool
found end points
http://pastebin.com/A7BJXErv
Last edited by bijendra on 14 Dec 2011, 13:03, edited 2 times in total.
var log here
http://pastebin.com/QwUvMnan
http://pastebin.com/QwUvMnan
pmodemdiag
udevtrace-modemlog
http://pastebin.com/URNJTRun
pmodemdiag-
ls-etc-init.txt
http://pastebin.com/ZQh83eeW
proc devicec.txt
http://pastebin.com/YbV4EzPK
gprsmm.txt and bootini.sys
http://pastebin.com/5gW8pi9V
udevtrace-modemlog
http://pastebin.com/URNJTRun
pmodemdiag-
ls-etc-init.txt
http://pastebin.com/ZQh83eeW
proc devicec.txt
http://pastebin.com/YbV4EzPK
gprsmm.txt and bootini.sys
http://pastebin.com/5gW8pi9V
Last edited by bijendra on 14 Dec 2011, 13:05, edited 1 time in total.