Code: Select all
Protocol spec without prior Class and Subclass spec at line 4297
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 12d1:1c0b Huawei Technologies Co., Ltd.
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 005 Device 002: ID 045e:006a Microsoft Corp. Wireless Optical Mouse (IntelliPoint)
[root@mybox ~]#
[root@mybox ~]# usb_modeswitch -c /etc/usb_modeswitch.conf
Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Accessing device 003 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using first interface: 0x00
Using endpoints 0x0f (out) and 0x8f (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
SCSI inquiry data (for identification)
-------------------------
Vendor String: HUAWEI
Model String: Mass Storage
Revision String: 2.31
-------------------------
USB description data (for identification)
-------------------------
Manufacturer: HUAWEI
Product: HUAWEI Mobile
Serial No.: not provided
-------------------------
Setting up communication with interface 0
Using endpoint 0x0f for message sending ...
Trying to send message 1 to endpoint 0x0f ...
OK, message successfully sent
Resetting response endpoint 0x8f
Resetting message endpoint 0x0f
Could not reset endpoint (probably harmless): -71
Device is gone, skipping any further commands
Checking for mode switch (max. 20 times, once per second) ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
found matching product ID
adding device
Found target device, now opening
Found correct target device
Mode switch succeeded. Bye.
[root@mybox ~]#
[root@mybox ~]# dmesg
Linux version 2.6.18-308.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-52)) #1 SMP Tue Feb 21 20:05:41 EST 2012
[mod edit: deleted lots of non-relevant lines]
usb 1-2: new high speed USB device using ehci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Vendor: HUAWEI Model: Mass Storage Rev: 2.31
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HUAWEI Model: SD Storage Rev: 2.31
Type: Direct-Access ANSI SCSI revision: 02
usb-storage: device scan complete
sd 3:0:0:0: Attached scsi removable disk sda
usb-storage: device scan complete
scsi 2:0:0:0: Attached scsi generic sg0 type 5
sd 3:0:0:0: Attached scsi generic sg1 type 0
sr0: scsi-1 drive
sr 2:0:0:0: Attached scsi CD-ROM sr0
ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
usb 1-2: usbfs: process 3571 (usb_modeswitch) did not claim interface 0 before use
scsi 2:0:0:0: rejecting I/O to dead device
usb 1-2: USB disconnect, address 3
usb 1-2: new high speed USB device using ehci_hcd and address 4
usb 1-2: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
Vendor: HUAWEI Model: Mass Storage Rev: 2.31
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HUAWEI Model: SD Storage Rev: 2.31
Type: Direct-Access ANSI SCSI revision: 02
sd 5:0:0:0: Attached scsi removable disk sda
sd 5:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
sr0: scsi-1 drive
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
usb-storage: device scan complete
ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[root@mybox ~]# Code: Select all
Component: system-config-network
Version: 1.3.99.21
Summary: TB3c0e7198 GUI_functions.py:466:gui_run_dialog:AttributeError: 'NoneType' object has no attribute 'connect'
Traceback (most recent call last):
File "/usr/share/system-config-network/netconfpkg/gui/maindialog.py", line 757, in on_activateButton_clicked
self.activateButtonFunc[self.active_page](button)
File "/usr/share/system-config-network/netconfpkg/gui/maindialog.py", line 974, in on_deviceActivateButton_clicked
(status, txt) = dev.activate(dialog = self.dialog)
File "/usr/share/system-config-network/netconfpkg/NCDevice.py", line 423, in activate
dialog = dialog )
File "/usr/share/system-config-network/netconfpkg/NC_functions.py", line 577, in generic_run_dialog
dialog = dialog)
File "/usr/share/system-config-network/netconfpkg/gui/GUI_functions.py", line 466, in gui_run_dialog
dlg.connect( "delete-event", __on_Dialog_close )
AttributeError: 'NoneType' object has no attribute 'connect'
Local variables in innermost frame:
xml: <glade.XML object (PyGladeXML) at 0x8ac39dc>
stdin: 0
dlg: None
string: <module 'string' from '/usr/lib/python2.4/string.pyc'>
img: None
title: system-config-network:
Network device activating...
root: /
gtk: <module 'gtk' from '/usr/lib/python2.4/site-packages/gtk-2.0/gtk/__init__.pyc'>
command: /sbin/ifup
CancelException: netconfpkg.gui.GUI_functions.CancelException
label: Activating network device eth1, please wait...
catchfd: (1, 2)
searchPath: 0
argv: ['/sbin/ifup', 'eth1', 'up']
closefd: -1
dialog: <gnome.ui.App object (GnomeApp) at 0x8892e3c>
swindow: None
os: <module 'os' from '/usr/lib/python2.4/os.pyc'>
lbl: None
select: <module 'select' from '/usr/lib/python2.4/lib-dynload/selectmodule.so'>
errlabel: Cannot activate network device eth1!